Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2011 Dodge Avenger, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Chrysler 200, 2010 Chrysler Sebring, 2010-2012 Dodge Caliber and 2010-2014 Jeep Patriot, Compass and Dodge Avenger vehicles. The Occupant Restraint Control (OCR) module may short circuit, preventing the frontal air bags, seat belt pretensioners, and side air bags from deploying in the event of a crash. Remedy: Chrysler will notify owners, and dealers will replace the OCR, free of charge. Interim letters informing owners that parts are not available yet were mailed on October 26, 2016. The recall began on August 15, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S61.
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011DODGE JOURNEY, JEEP WRANGLER, CHRYSLER 200, CHRYSLER 200 CONVERTIBLE, DODGE AVENGER, DODGE NITRO, JEEP LIBERTY, DODGE CALIBER, JEEP COMPASS, JEEP PATRIOT, DODGE GRAND CARAVAN AND CHRYSLER TOWN & COUNTRY VEHICLES. SOME OF THESE VEHICLES MAY HAVE BEEN BUILT WITH A MISSING OR INCORRECTLY INSTALLED STEERING COLUMN PIVOT RIVET. Remedy: DEALERS WILL INSPECT FOR RIVET PRESENCE AND ALIGNMENT AND REPAIR THE STEERING COLUMN PIVOT AS REQUIRED, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 4, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Chrysler is recalling certain model year 2011-2013 Sebring and 200 vehicles manufactured June 28, 2011, through December 13, 2012; model year 2011-2013 Dodge Avenger vehicles manufactured June 25, 2011, through January 14, 2013; model year 2011-2012 Dodge Nitro vehicles manufactured June 17, 2011, through December 15, 2011; and model year 2011-2012 Jeep Liberty vehicles manufactured June 17, 2011, through August 15, 2012. Electrical over-stress of a resistor in the occupant restraint control module may lead to the non-deployment of the active head restraints during a rear impact collision. Remedy: Chrysler will notify owners, and dealers will flash the Totally Integrated Power Module (TIPM) or replace the occupant restraint control module, as needed, free of charge. The recall began on November 19, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N38.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
On certain vehicles in certain types of crashes, airbag and seatbelt pretensioner deployment capability may be lost due to a short in the front impact sensor wiring affecting Occupant Restraint Controller function. Failure of airbags and seatbelt pretensioners to deploy in a crash (when warranted) could increase the risk of injury. Correction: Dealers will replace the Occupant Restraint Controller module.
On certain vehicles, the airbag warning lamp may illuminate due to an electrical fault within the Occupant Restraint Control (ORC) module. As a result, the Active Head Restraints (AHR) may not deploy during a rear impact collision (where deployment is warranted), which could increase the risk of personal injury to the front seat occupants. Correction: Dealers will reprogram the Totally Integrated Power Module (TIPM) or replace the ORC module, as required.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
There is an internal fault in the control module for the occupant restraint controller. Production: The vehicles affected were manufactured between 19 June 2011 and 31 December 2013.. Types: Type: JS.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
Certain vehicles may have been built with a missing or incorrectly installed steering column pivot rivet. A steering column with a miss-installed rivet may not perform as intended in the event of a crash, which may increase the risk of personal injury. Correction: Dealers will inspect for steering column rivet presence and alignment, and repair as required.