Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2011 Honda Odyssey, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Honda (American Honda Motor Co.) is recalling certain 2011-2017 Honda Odyssey vehicles. The second row outboard seats can slide sideways to one of two positions. If a seat is placed between either of the two positions when attaching the seat to the vehicle floor, the seat will not latch properly to the seat striker, allowing the seat to tip forward unexpectedly during braking. Remedy: Honda will notify owners, and dealers will install a bracket to the second row outboard floor strikers, free of charge. The recall began April 2, 2018. Owners may contact American Honda Customer Support & Campaign Center at 1-888-234-2138. Honda's number for this recall is S0G.
Honda (American Honda Motor Co.) is recalling certain model year 2011-2016 Odyssey vehicles manufactured August 17, 2010, to October 1, 2015. The affected vehicles have second row outboard seats that have a release lever that allows the seats to move for easier access to the third row of seats. This release lever may remain in the unlocked position allowing the seats to move unexpectedly. Remedy: Honda will notify owners, and dealers will install an additional bracket and spring to both second row outboard seats, free of charge. Interim letter has been mailed, and a second notification will be sent . Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is KD5.
HONDA IS RECALLING CERTAIN MODEL YEAR 2011 HONDA ODYSSEY VEHICLES. THERE IS A POTENTIAL FAILURE WITH THE DRIVER AND THE FRONT PASSENGER DOOR POWER WINDOWS IN WHICH THE WINDOW MAY COME OFF THE TRACK CAUSING THE WINDOW TO BECOME INOPERATIVE AND PREVENTING IT FROM BEING ROLLED UP OR DOWN OR IT COULD DROP INTO THE DOOR. Remedy: DEALERS WILL REPLACE EITHER THE PASSENGER'S AND/OR THE DRIVER'S FRONT DOOR WINDOW GLASS, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 28, 2011. OWNERS MAY CONTACT HONDA CUSTOMER SERVICE AT 1-800-999-1009.
HONDA IS RECALLING CERTAIN MODEL YEAR 2011 HONDA ODYSSEY VEHICLES. IF THE FRONT WINDSHIELD WIPER BLADES BECOME FROZEN TO THE WINDSHIELD AND THE WIPER MOTOR IS SWITCHED ON, ONE OF THE FRONT WINDSHIELD WIPER LINKAGE RODS MAY BEND OR SEPARATE FROM THE MOTOR DUE TO INSUFFICIENT STIFFNESS OF THE ROD. Remedy: DEALERS WILL REPLACE THE FRONT WINDSHIELD WIPER ROD FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 28, 2011. OWNERS MAY CONTACT HONDA CUSTOMER SERVICE AT 1-800-999-1009.
Honda is recalling certain model year 2009-2013 Pilot and 2011-2013 Odyssey passenger vehicles manufactured from March 13, 2008, through December 21, 2012. One or more rivets that attach the airbag module to the airbag cover may be missing. Remedy: Honda will notify owners and instruct them to take their vehicle to a Honda dealer. The dealer will inspect the driver's airbag module and replace it if necessary, free of charge. The recall began on March 14, 2013. Owners may contact Honda at 1-800-999-1009.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, the rear outboard strikers of the second row outboard (outer) seats have a collar to define two set positions. If an outboard seat is positioned over the collar while attaching the seat to the vehicle floor, the seat will not latch properly to the striker. An unlatched second row outboard seat could tip forward during moderate to heavy braking, which could increase the risk of injury to the seat occupant. Correction: Dealers will install a second row seat striker bracket and a warning label on both second row outer seats. Additionally, dealers will also place supplemental owner information cards in the glove box.
On certain vehicles, the lever on the second row outboard seats, which allows access to the third row seat, may stay in the unlocked position after returning the seat to its normal seating position. An unlocked second row outboard seat could increase the risk of injury to the seat occupant in the event of a crash. Correction : Dealers will install an additional bracket and spring to the second row outboard seat adjuster to ensure proper engagement of the walk-in lever.
Certain vehicles may not comply with Canadian Motor Vehicle Safety Regulations. The compliance label may bear incorrect rear Gross Axle Weight Rating (GAWR) information (lower than the vehicle's actual rear GAWR). Correction: A production change has been undertaken to remedy this technical non-compliance condition. No corrective recall action is required as the technical non-compliance conditions are deemed to be non-safety related.
On certain vehicles, the airbag cover may not have been adequately secured to the driver’s airbag module. As a result, the airbag may deploy with an irregular shape, or the cover may detach during deployment. Failure of the airbag to deploy in the designed manner during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the driver’s airbag module.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
The second row of the outboard seats is not properly secured. Production: The vehicles affected were manufactured between 2010 and 2017.. Types: Type: RL5; US models, no type approval..
The second row outboard seats are not properly secured. Production: The vehicles affected were manufactured between 2011 and 2016.. Types: RL5.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, if the wiper blades become frozen to the windshield, and the wiper motor is switched ON, one of the wiper rods could bend or separate from the motor (due to insufficient stiffness of the rod). Loss of windshield wiping capability, should it occur during a rainy/snowy day, may compromise the driver's ability to see the road and its users, which could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the windshield wiper rod.