Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2011 Mitsubishi Lancer Evolution, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2008-2011 Lancer, Lancer Evolution, and Outlander; 2009-2011 Lancer Sportback, Lancer Rilliart, and Lancer Sportback Ralliart; and 2011 Outlander Sport vehicles. The affected vehicles, manufactured with 4B1 engines, have an engine pulley and belt arrangement for turning the alternator, the cooling fan and the power steering pump (if equipped). These pulleys may experience unusual wear and allow for belt detachment. Remedy: Mitsubishi will notify owners, and dealers will replace the drive belt with a rubber belt. Drive pulleys that are excessively worn will be replaced. These repairs will be performed free of charge. The recall began on October 15, 2014. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-14-009.
Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2009-2011 Lancer vehicles manufactured March 16, 2009, to March 30, 2011, 2010-2011 Lancer Sportback vehicles manufactured June 17, 2009, to December 1, 2010, 2010-2011 Lancer Evolution vehicles manufactured July 14, 2009, to January 7, 2011, 2009-2011 Outlander vehicles manufactured February 10, 2009, to June 22, 2011, and 2011 Outlander Sport vehicles manufactured August 26, 2010, to November 19, 2010. In the affected vehicles, the blower motor may fail. Remedy: Mitsubishi will notify owners, and dealers will replace a suspect blower motor, free of charge. The recall began on June 15, 2015. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-15-003.
Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2008-2013 Lancer Evolution vehicles manufactured from December 12, 2007, through March 5, 2013. In the affected vehicles, the clutch master cylinder can fail. Remedy: Mitsubishi will notify owners, and dealers will replace the affected clutch master cylinders free of charge. The recall began on November 12, 2013. Owners may contact Mitsubishi at 1-888-648-7820. Mitsubishi's campaign number for this recall is SR-13-009.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the wiper link rod with a countermeasure one, and will replace the wiper motor crank arm with a new one.
On certain vehicles operated in areas of heavy road salt usage, a mixture of snow, water and road-salt solution may infiltrate between the front impact sensor and the bracket that attaches it to the vehicle. Over time, repeated freezing/thawing cycles could cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. In the event of a crash, this could result in delayed deployment of the driver and passenger front airbags which would increase the risk of injury. Correction: Dealers will inspect the front impact sensor and replace it if it is found to be cracked. An updated designed bracket and cover will also be installed.
On certain vehicles, the drive belt material may cause abnormal pulley wear. If the vehicle is driven under this condition, the drive belt may become damaged from the worn pulley and detach, affecting electrical charging system and cooling system function and would illuminate the engine warning lamp(s) on the instrument panel. This could result in battery depletion and an overheated engine, resulting in a loss of motive power. Vehicles equipped with a hydraulic power steering system could also experience loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the drive belt, and the pulley will be replaced if it is found worn beyond a certain level.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
Due to an inappropriate programming of the electrical control unit (ECU), even if the battery is deteriorated or used up, the ECU may stop the engine while circulating. Production: The affected vehicles were manufactured from June 2010 to April 2018.. Types: - EC-type approval number: e1*2007/46*0368*00, e1*2007/46*0951*00, e1*2001/116*0441*00; - Model: ASX (GA1W, 2011 to 2017), Lancer (CY1A, CY6A, 2011), Lancer Sportback (CX1A, CX6A, 2011) and Space Star (A03A, 2013 to 2018).
The flange area of the engine's multi-belt auto tensioner may crack under high-load driving conditions, which may cause the drive-belt to fall off. Production: Model year: ASX (2011–2012), Lancer (2008-2012), Outlander (2008-2012); ; VIN: JMBXTCW5W9F004919. Production period: 08/04/2009.. Types: EC-type approval number: e1*2001/116*0482*01; Model: ASX (GA0W), Lancer (CY0A), Outlander (CW0W);.
Due to temperature and humidity, the adhesive material between the sunroof glass and its outer frame may weaken. Production: Model year: 2008-2009 (Lancer), 2009-2010 (Lancer Sportback), 2006-2012 (Outlander) . Types: EC-type approval number: e1*2001/116*0406*00; e21*NKS*0001*01; Model: Lancer (CY0A), Lancer Sportback (CX0A), Outlander (CW0W);.
Production: Vehicles manufactured between 2009 and 2010 are affected. . Types: Type: CWB; CY0; CZ0 EC type approval: e1*2001/116*0482*..; e1*2001/116*0441*..; e1*2001/116*0465*..;.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the clutch master cylinder may fail, resulting in an inability to disengage the clutch or to shift gears. This could result in unintended vehicle movement, increased stopping distances and engine stalling. Such an occurrence could increase the risk of a crash causing injury or property damage. Correction: Dealers will replace the clutch master cylinder.
Production: Model years: ASX: 2011, Lancer: 2008 - 2011, Lancer Sportback: 2009 - 2011, Lancer Evolution: 2008 - 2011, Outlander: 2006 - 2011.. Types: ASX (GA0W), Lancer (CY0W), Lancer Sportback (CX0W), Evolution (CZ4A) and Outlander (CW0W).