Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2011 Toyota Venza, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring. Remedy: SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2009 CAMRY VEHICLES MANUFACTURED FROM JULY 1, 2008, THROUGH FEBRUARY 28, 2009, AND MODEL YEAR 2009-2011 VENZA VEHICLES MANUFACTURED FROM OCTOBER 20, 2008, THROUGH JANUARY 4, 2011. DURING ASSEMBLY OF THE CONTACT-TYPE STOP LAMP SWITCH, SILICONE GREASE MAY HAVE COME IN CONTACT WITH THE SURFACE OF THE SWITCH WHICH COULD CAUSE CONTACT RESISTANCE. IF THIS OCCURS, WARNING LAMPS COULD ILLUMINATE, A NO START CONDITION COULD RESULT, THE SHIFT LEVER MAY NOT SHIFT FROM THE PARK POSITION, OR THE VEHICLES BRAKE LIGHTS COULD BECOME INOPERATIVE. Remedy: TOYOTA WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE STOP LAMP SWITCH, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 12, 2012. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed. Remedy: Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2011 VENZA AND SIENNA PASSENGER CARS MANUFACTURED FROM MARCH 7, THROUGH MARCH 10, 2011. THERE IS A POSSIBILITY THAT THE FRONT, RIGHT, DRIVE SHAFT MAY BREAK DUE TO INSUFFICIENT HEAT TREATMENT. Remedy: TOYOTA WILL NOTIFY OWNERS AND DEALERS WILL INSPECT THE DRIVE SHAFT, AND, IF THE DRIVE SHAFT IS IDENTIFIED AS ONE THAT MAY NOT HAVE BEEN CORRECTLY MANUFACTURED, IT WILL BE REPLACED WITH A NEW ONE AT NO CHARGE. THE SAFETY RECALL BEGAN ON JUNE 22, 2011. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota Tacoma, 2011-2012 Toyota Sienna, 2012 Toyota Prius, 2013 Scion FR-S, 2011 Scion XD, 2011 Scion XB, and 2012 Scion TC vehicles. These vehicles were sold with labels that were outside the allowable one percent of accuracy of actual weight added. Thus, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) Number 110, "Tire Selection and Rims." Remedy: Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2009-2015 Venza vehicles. The Supplemental Restraint System (SRS) wiring may become damaged with regular use of the driver-side door. Remedy: Dealers will inspect and, if necessary, replace the driver-side front door wire harness, free of charge. Owner notification letters were mailed October 19, 2021. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TB01/21TA01.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Issue: On certain vehicles, the wiring for the airbag sensor in the driver's door could be damaged over time. If this happens, the side airbag and curtain airbag on the driver's side may not work properly in a crash. Note: This problem may cause the SRS warning lamp to turn on in the instrument cluster. Safety Risk: Airbags that do not work properly could create an increased risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the driver's door wire harness. It will be replaced, if necessary.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
The wiring harness of the driver's door might be defective. Consequently, the wiring of the airbag sensor might malfunction, impairing the functioning of the lateral and head airbags, increasing the risk of injuries in the event of an accident. Production: The affected vehicles were manufactured from 05.11.2009 to 17.04.2015.. Types: Individual approval.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, silicone grease may have come into contact with the stop lamp switch during vehicle assembly. If grease infiltrates the switch, instrument panel warning lamps could illuminate, a no start condition could result, or the shift lever may not shift from the PARK position. In some instances, the vehicle stop lamps could become inoperative. Failure of the stop lamps to illuminate when the brakes are applied may result in the following road users being unaware of the driver's intentions, increasing the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the stop lamp switch.
On certain AWD vehicles, the right front driveshaft may not have received adequate heat treatment during the manufacturing process. As a result, the driveshaft could break. Failure of the right front driveshaft would result in a complete loss of vehicle propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the right front driveshaft.