Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2012 BMW F800 GS, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
BMW of North America, LLC (BMW) is recalling certain Accessory Windscreens, sold for installation on various motorcycles. Specifically being recalled is Windscreen model number 8531917, sold for use on model year 2012-2018 F700GS motorcycles, Windscreen model number 8544629, sold for use on model year 2015-2018 R1200R motorcycles, Windscreen model number 8546224, sold for use on model year 2014-2018 S1000R motorcycles, Windscreen model number 8551929, sold for use on model year 2015-2018 S1000XR motorcycles, Windscreen model number 8554726, sold for use on model year 2013-2018 R1200GS motorcycles, Windscreen model number 8554727 sold for use on model year 2014-2018 R1200GS Adventure motorcycles, Windscreen model number 8556927, sold for use on model year 2015-2018 R1200RS motorcycles, Windscreen model number 8559548, sold for use on model year 2017-2018 R1200GS motorcycles and Windscreen model number 8561755, sold for use on model year 2012-2018 F800GS motorcycles. These windscreens have extra tinting on them that may reduce the rider's visibility. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 205, "Glazing Materials." Remedy: BMW will notify owners, and dealers will replace the windscreen, free of charge. The recall is expected to begin May 10, 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2017 F800R and F800GT motorcycles, 2014-2018 R1200GS and R1200GS Adventure motorcycles, 2016-2017 S1000XR motorcycles and 2015-2017 R1200R and R1200RS, 2008-2012 F650GS, 2008-2018 F800GS, and 2014-2017 F800GS Adventure motorcycles. When equipped with the optional aluminum luggage cases, the rear reflex reflectors may be partially blocked. The aluminum case mounts for the R1200GS and R1200GS Adventure may also partially block the reflectors. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: BMW will notify owners, and dealers will install reflectors on the cases or for the case mounts, an additional bracket with rear reflex reflectors, free of charge. The recall began October 16, 2017. Owners may contact BMW customer service at 1-800-525-7417.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Certain tinted windshields sold as accessories through BMW dealerships may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 205 - Glazing Materials. The windshields may contain extra tinting in certain areas, which would be contrary to the requirements of the standard and could potentially limit the driver's visibility, increasing the risk of a crash. Correction: Dealers will replace the tinted windshield with one that meets the standard's requirements.
Certain motorcycles with dealer installed accessory turn signals may not comply with the requirements of Canada Motor Vehicle Safety Standard (CVMSS) 108 - Lighting System and Retroreflective Devices. The size of the lens on the accessory turn signals may be too small, and therefore would not meet the requirements of the standard. This could reduce vehicle conspicuity to following and approaching road users, and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the accessory turn signals with factory indicators that meet the requirements of the standard.
On certain motorcycles, the side stand ignition cut-off switch could loosen and become damaged. As a result, the side stand switch would fail to turn OFF the engine if the side stand is extended while a drive gear is engaged. If the motorcycle is ridden with the side stand in the down position, the stand could hit the ground during a turn, which could result in a loss of vehicle control and a crash causing property damage and/or personal injury. Correction: Dealers will install bolts to securely fasten the side stand switch (originally held by a circlip).
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain