Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2012 Honda Odyssey, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Honda (American Honda Motor Co.) is recalling certain 2011-2017 Honda Odyssey vehicles. The second row outboard seats can slide sideways to one of two positions. If a seat is placed between either of the two positions when attaching the seat to the vehicle floor, the seat will not latch properly to the seat striker, allowing the seat to tip forward unexpectedly during braking. Remedy: Honda will notify owners, and dealers will install a bracket to the second row outboard floor strikers, free of charge. The recall began April 2, 2018. Owners may contact American Honda Customer Support & Campaign Center at 1-888-234-2138. Honda's number for this recall is S0G.
Honda (American Honda Motor Co.) is recalling certain model year 2011-2016 Odyssey vehicles manufactured August 17, 2010, to October 1, 2015. The affected vehicles have second row outboard seats that have a release lever that allows the seats to move for easier access to the third row of seats. This release lever may remain in the unlocked position allowing the seats to move unexpectedly. Remedy: Honda will notify owners, and dealers will install an additional bracket and spring to both second row outboard seats, free of charge. Interim letter has been mailed, and a second notification will be sent . Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is KD5.
HONDA IS RECALLING CERTAIN MODEL YEAR 2012, ODYSSEY VEHICLES MANUFACTURED FROM OCTOBER 31, 2011, THROUGH NOVEMBER 30, 2011. THE RETENTION NUT FOR THE FRONT RIGHT LOWER SUSPENSION DAMPER BOLT MAY NOT HAVE BEEN TIGHTENED TO THE PROPER TORQUE, POTENTIALLY ALLOWING THE NUT TO LOOSEN. Remedy: HONDA CONTACTED ALL NINE OWNERS BY PHONE ON DECEMBER 19, 2011, AND REPAIRED THE VEHICLES AS NECESSARY FREE OF CHARGE. OWNERS MAY CONTACT HONDA AT 1-800-999-1009.
Honda is recalling certain model year 2012-2013 CR-V, Odyssey, and model year 2013 Acura RDX vehicles. During sub-freezing temperatures, the brake-shift interlock blocking mechanism may become slow and allow the gear selector to be moved from the Park position without pressing the brake pedal. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard 114, "Theft Protection and Rollaway Prevention." Remedy: Honda will notify owners and instruct them to take their vehicle to a Honda or Acura dealer. The dealer will install an updated brake shift interlock blocking mechanism free of charge. The recall began on May 13, 2013. Owners may contact Honda at 1-800-999-1009. Honda's campaign recall numbers are S96, S97, and S98.
Honda is recalling certain model year 2009-2013 Pilot and 2011-2013 Odyssey passenger vehicles manufactured from March 13, 2008, through December 21, 2012. One or more rivets that attach the airbag module to the airbag cover may be missing. Remedy: Honda will notify owners and instruct them to take their vehicle to a Honda dealer. The dealer will inspect the driver's airbag module and replace it if necessary, free of charge. The recall began on March 14, 2013. Owners may contact Honda at 1-800-999-1009.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, the rear outboard strikers of the second row outboard (outer) seats have a collar to define two set positions. If an outboard seat is positioned over the collar while attaching the seat to the vehicle floor, the seat will not latch properly to the striker. An unlatched second row outboard seat could tip forward during moderate to heavy braking, which could increase the risk of injury to the seat occupant. Correction: Dealers will install a second row seat striker bracket and a warning label on both second row outer seats. Additionally, dealers will also place supplemental owner information cards in the glove box.
On certain vehicles, the lever on the second row outboard seats, which allows access to the third row seat, may stay in the unlocked position after returning the seat to its normal seating position. An unlocked second row outboard seat could increase the risk of injury to the seat occupant in the event of a crash. Correction : Dealers will install an additional bracket and spring to the second row outboard seat adjuster to ensure proper engagement of the walk-in lever.
Certain vehicles may not comply with Canadian Motor Vehicle Safety Regulations. The compliance label may bear incorrect rear Gross Axle Weight Rating (GAWR) information (lower than the vehicle's actual rear GAWR). Correction: A production change has been undertaken to remedy this technical non-compliance condition. No corrective recall action is required as the technical non-compliance conditions are deemed to be non-safety related.
On certain vehicles, the brake-shift interlock may not function properly at low temperatures. This could allow the transmission gear shift lever to be moved out of the PARK position without depressing the brake pedal. Depending which gear the driver selects, the vehicle could begin to move forward or backward immediately. This movement could result in property damage, or cause the vehicle to strike a bystander, potentially resulting in personal injury. Correction: Dealers will replace the gear shift assembly stopper.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
The second row of the outboard seats is not properly secured. Production: The vehicles affected were manufactured between 2010 and 2017.. Types: Type: RL5; US models, no type approval..
The second row outboard seats are not properly secured. Production: The vehicles affected were manufactured between 2011 and 2016.. Types: RL5.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the airbag cover may not have been adequately secured to the driver’s airbag module. As a result, the airbag may deploy with an irregular shape, or the cover may detach during deployment. Failure of the airbag to deploy in the designed manner during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the driver’s airbag module.