Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2013 Freightliner Cascadia, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Daimler Trucks North America LLC (DTNA) is recalling certain 2004-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Classic, FL80, FLD 120SD, Business Class M2, Western Star 4700, 4900, 6900, Sterling Acterra, L7500, LT7500, L8500, LT8500, L9500, and LT9500 vehicles. The vehicles may have an insufficient service brake air reservoir capacity. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems." Remedy: DTNA will notify owners, and dealers will add air reservoir capacity to the affected vehicles. Owner letters were mailed on November 29, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-815.
Daimler Trucks North America LLC (DTNA) is recalling certain 2013-2016 Freightliner Cascadia vehicles equipped with Hendrickson 5" drop axles. In certain front axle, brake lining, and brake spider combinations, braking may cause high vibrations, resulting in early failure of the tie-rod tube. Remedy: DTNA will notify owners, and dealers will replace the stamped brake spiders and the tie-rod, free of charge. The recall began April 12, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-807.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2012-2015 Freightliner Cascadia, Coronado, Business Class M2, 114SD, and Western Star 4900 trucks. In certain front axle, brake lining, and brake spider combinations, braking may cause high vibrations, resulting in early failure of the tie-rod tube. Remedy: DTNA will notify owners, and dealers will replace the brake linings, brake spider, and tie-rod, free of charge. The recall began March 22, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL782.
Daimler Trucks North America, LLC. (DTNA) is recalling certain model year 2013-2017 Freightliner Cascadia vehicles manufactured September 24, 2012, to May 27, 2015 and equipped with compressed natural gas (CNG) engines. The affected vehicles have a Power Distribution Module (PDM) that is mounted near the CNG fuel tank. Due to its location, the PDM may be sprayed with water and contaminants from the road, possibly causing the PDM to short circuit. Remedy: DTNA will notify owners, and dealers will relocate the PDM, free of charge. An interim notice was mailed to owners on November 7, 2016. The recall began on March 3, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-721.
Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf Remedy: DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal. Remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2011-2014 Cascadia, Business Class M2, Coronado, and Columbia Glider vehicles manufactured April 5, 2010, to June 15, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage. Remedy: DTNA will notify owners, and DTNA authorized service facilities will replace the fifth wheel with an Ultra NT model fifth wheel, free of charge. The recall began on November 20, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-692.
Daimler Trucks North America (DTNA) is recalling certain model year 2013 Freightliner Cascadia vehicles with rear axles assembled by Meritor and equipped with ConMet Preset Plus Hubs manufactured from August 6, 2012 through December 7, 2012. In the affected axles, the axle hub may be missing a locking snap ring. Remedy: DTNA will notify owners, and dealers will inspect the affected wheel ends for the lock ring, and install them as necessary, free of charge. The safety recall began on June 26, 2014. Owners may contact DTNA at 1-800-547-0712. The manufacturer's number for this recall is FL-653.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2013-2015 Freightliner Cascadia vehicles manufactured March 27, 2015, to November 4, 2014, and powered by compressed natural gas (CNG). The affected vehicles have a tailpipe that allows hot exhaust to exit near the CNG tank pressure relief device (PRD). Remedy: All the vehicles involved in this recall campaign have been repaired. The recall is began on March 13, 2015. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-695.
Daimler Trucks North America LLC (Daimler) is recalling certain model year 2008-2015 Freightliner 114SD, Cascadia, M2 Business Class, Sterling LT8500, and Thomas Built Buses Saf-T-Liner HDX vehicles manufactured February 19, 2008, through February 11, 2014, and equipped with Cummins Westport Model ISL G and Cummins Westport Model ISX12 G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Remedy: Cummins and Cummins Westport will notify owners, and authorized Cummins service facilities will upload a new ECM calibration, free of charge. The recall began on April 12, 2014. Customers may contact Daimler at 1-800-385-4357 or Cummins Inc. at 1-800-343-7357. Daimler's number for this recall is FL-660.
Daimler Trucks of North America LLC (DTNA) is recalling certain model year 2011-2015 Freightliner Cascadia and M2 trucks manufactured June 2, 2011 to October 23, 2014. The vehicles are not in compliance with the requirements of the Federal Motor Vehicle Safety Standards No. 303, "Fuel System Integrity Of Compressed Natural Gas Vehicles." Specifically, the tail pipe on these vehicles terminates under the compressed natural gas (CNG) tank and can overheat the fuel system. Remedy: DTNA will notify owners, and dealers will extend the tailpipe beyond the cabinet, free of charge. The recall began Feburary 12, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-671.
Daimler Trucks North America (DTNA) is recalling certain model year 2012-2014 Cascadia and Coronado vehicles manufactured between November 21, 2011, and April 3, 2013. In the affected vehicles, when the ignition is off and the door is opened without the parking brake applied, the dashboard does not display the correct message of "Park Brake Off Door Open." Remedy: DTNA will notify owners, and dealers will update then display software. The safety recall began on June 6, 2013. Owners may contact DTNA at 1-800-547-0712. Daimler's recall campaign number is FL-642.
DAIMLER TRUCKS NORTH AMERICA (DTNA) IS RECALLING CERTAIN MODEL YEAR 2013 FREIGHTLINER, WESTERN STAR, FREIGHTLINER CUSTOM CHASSIS TRUCKS, AND THOMAS BUILT BUSES MANUFACTURED FROM APRIL 18, 2012, THROUGH MAY 11, 2012, AND EQUIPPED WITH DETROIT AXLE-BRAND FRONT AXLE KNUCKLES. THE FRONT KNUCKLES ON THESE VEHICLES MAY HAVE A MACHINING ERROR IN THE WHEEL BEARING AREA WHICH MAY LEAD TO PREMATURE SPINDLE FAILURE. Remedy: DTNA WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT AND REPLACE THE AFFECTED COMPONENTS, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 10, 2012. OWNERS MAY CONTACT DAIMLER TRUCKS NORTH AMERICA TOLL FREE AT 1-800-547-0712.
DAIMLER TRUCKS (DTNA) IS RECALLING CERTAIN MODEL YEAR 2006-2013 FREIGHTLINER, STERLING, AND WESTERN STAR VEHICLES, EQUIPPED WITH DETROIT DIESEL EPA07 AND EPA10, DD13 AND DD15/16 ENGINES, MANUFACTURED FROM JANUARY 20, 2006, THROUGH FEBRUARY 20, 2012. THE PUMP TO RAIL HIGH PRESSURE FUEL LINE SUPPORT SYSTEM USED ON THESE ENGINES IS SENSITIVE TO ASSEMBLY TORQUE AND MAY BE DAMAGED DURING SERVICE WORK. AS A RESULT OF OTHER REPAIRS, THE LINE SUPPORTS MAY LOOSEN, POTENTIALLY LEADING TO FUEL LINE CRACKING AND A FUEL LEAK. Remedy: DTNA WILL NOTIFY OWNERS, AND WHERE NECESSARY, THE HIGH PRESSURE FUEL LINE SUPPORT SYSTEM WILL BE REPLACED BY DTNA AUTHORIZED SERVICE FACILITIES, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 27, 2012. OWNERS MAY CONTACT DTNA AT 1-800-547-0712.
Daimler Trucks North America (DTNA) is recalling certain model year 2012-2014 Freightliner Cascadia tractors manufactured from April 12, 1210, through March 2, 2013, and equipped with a SAMCAB software version 6.2. On vehicles configured to have the turn signals operate as Daytime Running Lights (DRLs) and the 'Turn-Tip' turn signal function activated, the DRLs may not illuminate properly after using the 'Turn-Tip' function while driving. Remedy: DTNA sent notification to owners on May 6, 2015, instructing them to contact their dealers and arrange to have the free SAMCAB software updated to correct the operation of the DRLs and "Turn Tip" feature. Owners may contact DTNA at 1-800-547-0712.
Daimler Trucks North America (DTNA) is recalling certain model year 2013-2014 Freightliner Cascadia trucks manufactured December 11, 2012, through November 27, 2013 and equipped with a Meritor Wabco electronically controlled air suspension (ECAS) system. In the affected vehicles, the wiring harnesses for the ECAS may have been reversed. Remedy: DTNA will notify the owners, and dealers will inspect the ECAS wiring, correcting it as necessary, free of charge. The recall began on February 24, 2014. Owners may contact Daimler at 1-800-547-0712. DTNA's number for this recall is FL-656.
DAIMLER TRUCKS (DTNA) IS RECALLING CERTAIN MODEL YEAR 2012-2013 FREIGHTLINER 108SD, BUSINESS CLASS M2, CASCADIA, CORONADO VEHICLES, EQUIPPED WITH A HALDEX QUICK RELEASE VALVE, AND MANUFACTURED FROM FEBRUARY 3, 2012, THROUGH MARCH 2, 2012. THE QUICK RELEASE VALVE COVER MAY NOT BE CORRECTLY MANUFACTURED, ALLOWING THE COVER TO BECOME SEPARATED FROM THE VALVE BODY. IF THE COVER SEPARATES FROM THE VALVE BODY, THE FRONT BRAKES MAY NOT FUNCTION. Remedy: DTNA WILL NOTIFY OWNERS, AND WHERE NECESSARY, THE QUICK RELEASE VALVE WILL BE REPLACED BY DTNA AUTHORIZED SERVICE FACILITIES, FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN BEFORE JUNE 15, 2012. OWNERS MAY CONTACT DTNA AT 1-800-547-0712.
Daimler Trucks North America (DTNA) is recalling certain model year 2013 Freightliner Cascadia vehicles with rear axles assembled by Meritor and equipped with ConMet Preset Plus Hubs manufactured from August 6, 2012 through December 7, 2012. In the affected axles, the axle hub may be missing a locking snap ring. Remedy: DTNA will notify owners, and dealers will inspect the affected wheel ends for the lock ring, and install them as necessary, free of charge. The safety recall began on December 26, 2013. Owners may contact DTNA at 1-503-745-6910. The manufacturer's recall number is FL-653.
Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks equipped with "Fleet Engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck. Safety Risk: Reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash. Corrective Actions: Daimler Trucks of North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.
On certain trucks, a combination of brake vibrations and corrosion could cause the tie-rod tube to fatigue and break. This may lead to a disconnect between the front wheels and reduce the ability to steer the vehicle, which could increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Service Facilities will replace brake linings, brake spiders and tie rods as necessary.
On certain vehicles with air brakes, after several hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal. If the brake lights do not illuminate, following road users would be unaware of the intent of the driver to slow the vehicle, which could increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will repair the brake light pressure switch.
On certain vehicles built with a power distribution module (PDM) located on the frame rail behind the cab and beneath the compressed natural gas (CNG) fuel tanks, due to the location of the PDM, it could be subjected to water spray and contamination from the road, which could result in localized melting or burning of the PDM in close proximity to the CNG fuel tanks. Should a CNG leak occur in the presence of an ignition source, a fire and/or explosion could result, increasing the risk of injury and/or damage to property. Correction: Dealers will relocate the PDM.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the fifth wheel locking mechanisms could be susceptible to damage and/or wear. This could cause the locking mechanism to fail properly engage, potentially resulting in a towed trailer unit separating from the truck tractor. As a result, the trailer could strike another vehicle, stationary object, or bystander, causing injury and/or damage to property. Correction: Fontaine dealers will replace all Ultra LT fifth wheel units with Ultra NT model fifth wheel units.
On certain trucks, the seat belts may not comply with Canada Motor Vehicle Safety Standard 209 - Seat Belt Assemblies. Due to a defect in manufacturing, the seat belt buckle may not release as required by the standard. This could hinder egress from the vehicle in an emergency, increasing the risk of injury. Correction: Dealers will inspect and, if necessary, replace affected seatbelt buckles.
On certain vehicles, the instrument panel may show an incorrect park brake message. If the ignition is switched OFF and the driver’s door opened (before the park brake is applied), the message “Park Brake On” may be incorrectly displayed instead of “Park Brake off Door Open”. Should the vehicle be parked on a sufficient slope, failure to apply the park brake could allow unintended vehicle movement, which could cause a crash resulting in property damage and/or personal injury. Correction: Dealers will update the Instrument Cluster Module software.
On certain vehicles with turn signals configured to act as Daytime Running Lamps (DRL), the DRL may not reactivate following turn signal operation. A loss of DRL illumination could render the vehicle less visible to other motorists and to pedestrians during daylight hours, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will reprogram vehicles with updated software.
On certain vehicles, the wheel rims may have been manufactured incorrectly and could fail. A wheel separating from the vehicle could cause a loss of control and a crash. In addition, the errant wheel assembly could strike a vehicle, stationary object, or a bystander. These issues could result in property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the wheel rims. Note: Further evaluation revealed that no Canadian vehicles are involved.
On certain trucks, the front axle knuckles may have been manufactured incorrectly, which could lead to shorter than expected bearing and knuckle life. In some instances, this could result in separation of the wheel from the axle. A wheel separating from the vehicle could cause a loss of control and a crash. In addition, the errant wheel assembly could strike a vehicle, stationary object or a bystander. These issues could result in property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the front axle knuckles.
On certain trucks, the quick release valve (QRV) cover may not have been welded correctly during manufacturing process and may become loose or separate from the valve body. If this occurs, air pressure may not be supplied to the front brakes during brake application. The rear brakes will continue to function. Reduction in braking efficiency could increase stopping distances, possibly resulting in a crash causing property damage and/or personal injury. Correction: Daimler authorized repair facilities will inspect and if necessary replace the quick release valve.
On certain vehicles, an incorrect steering wheel fastener may have been installed during vehicle assembly. The incorrect nut may not provide the clamp load required to fully seat the steering wheel onto the steering shaft. This could allow the steering wheel to wobble, which could hamper vehicle operation. If the problem is ignored, the nut could loosen completely, which could allow the steering wheel to detach from the steering shaft. These issues could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the steering wheel nut.
On certain trucks equipped with a Detroit Diesel DD13, DD15 or DD16 engine, the support system for the high pressure fuel line (between the fuel pump and the fuel delivery rail) may be damaged during a service repair procedure. Incorrect torque applied to the dampener "P" clip fasteners may damage the fasteners, which could allow the clips to loosen. This could result in a cracked fuel line and a diesel fuel leak. Diesel fuel leakage may ignite on a hot engine surface and cause a fire. As well, diesel fuel spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. These issues could result in property damage and/or personal injury. Correction: Dealers will replace the high pressure fuel line and install a more robust fuel line support system.