Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2013 NEW Flyer XD60, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
New Flyer Industries Ltd. (New Flyer) is recalling certain model year 2013 XD35, XDE35, XE40, and 2013-2014 XD40, XD60, XDE40, XDE60, XN35, XN40, and XN60 transit buses. During installation, the Brake Pedal Mounting Plate may have been clamped between the Brake Pedal Assembly and the Brake Valve Actuator (BVA) resulting in a misalignment and binding of the internal piston in the BVA. Remedy: New Flyer will notify owners and will replace the brake pedal mounting plate and the Brake Valve Actuator (BVA), free of charge. The recall began on September 15, 2014. Owners may contact New Flyer customer service at 1-204-934-4876. New Flyer's number for this recall is R14-019.
New Flyer Industries, Ltd. (New Flyer) is recalling certain model year 2015 New Flyer MD30, 2012 C35LFR, 2010-2011 D35LFR, NABI 35LFW, 2011 D40LFR, 2010-2012 D60LFR and NABI 31LFW, 2010 C40LF, DE35LF, D40LF, DE40LFA, DE60LFA, GE35LFR and GE40LF, 2009 DE60LF and GE40LFR, 2010-2013 C40LFR, DE60LFR, NABI 416 and NABI 60BRT, 2010-2015 XD35, XDE40, NABI 40LFW and 42BRT, 2011-2015 XD40 and XN40, 2013-2015 XD60, XDE60 and XN35, 2010-2014 XDE35, 2013 XE40, 2012-2015 XN60, equipped with certain Recaro Ergo-M Commercial Bus Driver Seats. The affected seats have J-Brackets that may be missing welds which could allow the seat belt anchorage assembly to separate from the J-Bracket. Remedy: New Flyer will notify owners instructing them to inspect their seats for missing welds. Recaro will supply replacement anchorage brackets and cover the labor to replace them if any welds are missing, free of charge. The recall began on February 4, 2016. Owners may contact New Flyer customer service at 1-204-224-6706, or Recaro customer service at 1-800-873-2276. New Flyer's number for this recall is R16-001.
New Flyer Industries Ltd. (New Flyer) is recalling certain model year 2013 XD40 buses manufactured May 24, 2013, through September 5, 2013; model year 2013 XN40 buses manufactured April 18, 2013, through September 11, 2013; model year 2013 XD60 buses manufactured May 31, 2013, through September 5, 2013; and model year 2013 XDE40 buses manufactured on May 17, 2013. The color coded air lines to the E-6 brake treadle valve may have been installed incorrectly. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 121, "Air Brake Systems." Remedy: New Flyer has notified owners, and dealers will inspect, and correct the air line routing, as needed, free of charge. Owners may contact New Flyer at 1-204-982-8400. New Flyer's recall number is R13-023.
New Flyer Industries is recalling certain model year 2012 XD35 and XD40, model year 2013 XD60, XDE40 and XDE60 and model year 2012-2013 XN40 and XN60 transit buses. In the affected buses, the push-to-start button switch may have a weak return spring, allowing the engine to start unexpectedly. Remedy: New Flyer will notify owners, and dealers will inspect and replace the switches free of charge. The recall began June 19, 2013. Owners may contact New Flyer customer service at 1-204-224-6706. New Flyer's recall number is R13-014.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain buses, the software for the Electric Transit Operator (ETO) control module which controls the rear passenger exit door may contain an error. This could result in a higher than required output torque from the ETO control module when the door is in a fully open position, which over time may result in a fracture of the rear door roller plate. If the roller plate fails there is a potential for the rear door to open inadvertently while the bus is in motion, which would increase the risk for injury to vehicle occupants, and/or result in damage to property. Correction: Dealers will reprogram the ETO control module, and replace both rear door roller plates with more robust versions.
On certain buses, the software installed that controls the electronic door controller assemblies may be incorrect. The software programming in the controller may misinterpret door operational status from the vehicle multiplex system. If the driver were to initiate the doors open option as the bus accelerates from a stop, this could allow the passenger doors to reopen. If this were to occur while the vehicle is in motion, an occupant could fall from the vehicle and sustain injuries. Correction: Dealers will update the vehicle software.
On certain vehicles, insufficient clearance through the brake pedal mounting plate can result in improper alignment between the brake pedal assembly and the brake valve actuator. This misalignment could cause the brake valve actuator to become damaged, causing an increase in resistance when depressing the brake pedal, or brake drag when the pedal is released. This could increase vehicle stopping distances and increase the risk of a crash causing injury and/or damage to property. Correction: Owners will be sent repair instructions and revised parts.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain