Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2014 Freightliner Cascadia, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Daimler Trucks North America LLC (DTNA) is recalling certain 2004-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Classic, FL80, FLD 120SD, Business Class M2, Western Star 4700, 4900, 6900, Sterling Acterra, L7500, LT7500, L8500, LT8500, L9500, and LT9500 vehicles. The vehicles may have an insufficient service brake air reservoir capacity. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems." Remedy: DTNA will notify owners, and dealers will add air reservoir capacity to the affected vehicles. Owner letters were mailed on November 29, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-815.
Daimler Trucks North America LLC (DTNA) is recalling certain 2013-2016 Freightliner Cascadia vehicles equipped with Hendrickson 5" drop axles. In certain front axle, brake lining, and brake spider combinations, braking may cause high vibrations, resulting in early failure of the tie-rod tube. Remedy: DTNA will notify owners, and dealers will replace the stamped brake spiders and the tie-rod, free of charge. The recall began April 12, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-807.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2012-2015 Freightliner Cascadia, Coronado, Business Class M2, 114SD, and Western Star 4900 trucks. In certain front axle, brake lining, and brake spider combinations, braking may cause high vibrations, resulting in early failure of the tie-rod tube. Remedy: DTNA will notify owners, and dealers will replace the brake linings, brake spider, and tie-rod, free of charge. The recall began March 22, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL782.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2017 Freightliner M2 Business Class, 108 SD, 114 SD, Cascadia, Coronado, Western Star 4700, 4800, and 5700 XE trucks manufactured March 15, 2013, to July 29, 2016 and equipped with Conmet aluminum non-high capacity hubs. These vehicles specify a front axle weight limit that may be greater than that of the hub capacity. As a result, the hub may fail and the wheel may separate from the axle. Remedy: DTNA will notify owners, and dealers will replace the front axle hubs, free of charge. The recall began during November 2016. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-718.
Daimler Trucks North America, LLC. (DTNA) is recalling certain model year 2013-2017 Freightliner Cascadia vehicles manufactured September 24, 2012, to May 27, 2015 and equipped with compressed natural gas (CNG) engines. The affected vehicles have a Power Distribution Module (PDM) that is mounted near the CNG fuel tank. Due to its location, the PDM may be sprayed with water and contaminants from the road, possibly causing the PDM to short circuit. Remedy: DTNA will notify owners, and dealers will relocate the PDM, free of charge. An interim notice was mailed to owners on November 7, 2016. The recall began on March 3, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-721.
Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf Remedy: DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal. Remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2013-2015 Freightliner Cascadia vehicles manufactured March 27, 2015, to November 4, 2014, and powered by compressed natural gas (CNG). The affected vehicles have a tailpipe that allows hot exhaust to exit near the CNG tank pressure relief device (PRD). Remedy: All the vehicles involved in this recall campaign have been repaired. The recall is began on March 13, 2015. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-695.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2015 Freightliner Cascadia trucks manufactured November 19, 2013, to July 14, 2014, and equipped with certain model Side-Mount compressed natural gas (CNG) Fuel Systems, Part No. 23736011, manufactured August 1, 2013, to August 21, 2014 and Motion Industries T1700-06 flexible fuel hoses. The stainless steel braid hose reinforcement may corrode prematurely near the fitting crimp inside the slave tank enclosure. Remedy: DTNA will notify owners and dealers will replace the defective hose, free of charge. The recall began on April 1, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-678.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2015 Freightliner Cascadia vehicles manufactured May 5, 2014, to August 18, 2014. The affected vehicles are equipped with certain 1100W, 1500W, or 2000W inverters sold as a standalone option with both the Thermo King TriPac EVOLUTION and TriPac-e Auxiliary Power Units ("APU"). The Thermo King inverters provide 120V AC household power to a tractor cabin. The inverters may spark or overheat, resulting in a potential fire. Remedy: DTNA will notify owners, and Thermo King will either replace the inverter free of charge or refund the full purchase price. The recall began on November 14, 2014. Owners may contact Thermo King customer service at 1-866-766-2708. Owners may also contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-668.
Daimler Trucks North America LLC (Daimler) is recalling certain model year 2008-2015 Freightliner 114SD, Cascadia, M2 Business Class, Sterling LT8500, and Thomas Built Buses Saf-T-Liner HDX vehicles manufactured February 19, 2008, through February 11, 2014, and equipped with Cummins Westport Model ISL G and Cummins Westport Model ISX12 G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Remedy: Cummins and Cummins Westport will notify owners, and authorized Cummins service facilities will upload a new ECM calibration, free of charge. The recall began on April 12, 2014. Customers may contact Daimler at 1-800-385-4357 or Cummins Inc. at 1-800-343-7357. Daimler's number for this recall is FL-660.
Daimler Trucks of North America LLC (DTNA) is recalling certain model year 2011-2015 Freightliner Cascadia and M2 trucks manufactured June 2, 2011 to October 23, 2014. The vehicles are not in compliance with the requirements of the Federal Motor Vehicle Safety Standards No. 303, "Fuel System Integrity Of Compressed Natural Gas Vehicles." Specifically, the tail pipe on these vehicles terminates under the compressed natural gas (CNG) tank and can overheat the fuel system. Remedy: DTNA will notify owners, and dealers will extend the tailpipe beyond the cabinet, free of charge. The recall began Feburary 12, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-671.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014 Freightliner 108SD, 114SD, 122SD, Coronado, Argosy, Cascadia, Columbia, and M2 Business Class, and Western Star 4700, and 4900 vehicles manufactured August 5, 2013, through November 15, 2013, and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies." Remedy: DTNA will notify owners, and dealers will inspect and replace the seat belt buckle, as necessary, free of charge. The recall began on May 22, 2014. Owners may contact Daimler at 1-800-385-4357. DTNA's number for this campaign is FL-661. Note: This is an expansion of recall 13V-604.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2011-2014 Cascadia, Business Class M2, Coronado, and Columbia Glider vehicles manufactured April 5, 2010, to June 15, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage. Remedy: DTNA will notify owners, and DTNA authorized service facilities will replace the fifth wheel with an Ultra NT model fifth wheel, free of charge. The recall began on November 20, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-692.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014 Freightliner Cascadia trucks manufactured January 21, 2013, through May 10, 2013; and equipped with Wabco Maxxus Brakes. The brake caliper mounting bolts may be incorrectly torqued, which could result in the bolts loosening. Remedy: DTNA will notify owners, and dealers will inspect and tighten the caliper mounting bolts, as needed, free of charge. The recall began on November 8, 2013. Owner's may contact Daimler at 1-800-547-0712. Daimler's recall number is FL-644.
Daimler Trucks North America (DTNA) is recalling certain model year 2012-2014 Cascadia and Coronado vehicles manufactured between November 21, 2011, and April 3, 2013. In the affected vehicles, when the ignition is off and the door is opened without the parking brake applied, the dashboard does not display the correct message of "Park Brake Off Door Open." Remedy: DTNA will notify owners, and dealers will update then display software. The safety recall began on June 6, 2013. Owners may contact DTNA at 1-800-547-0712. Daimler's recall campaign number is FL-642.
Daimler Trucks North America LLC (Daimler) is recalling certain model year 2014-2015 Freightliner 122SD, Argosy, and Cascadia trucks manufactured July 22, 2013, to October 13, 2014, equipped with Wabco Quick Release Valves with Double Check manufactured February 6, 2013, to April 19, 2014. The affected vehicles may have been produced with a defective valve seat installed. Remedy: Daimler will notify owners, and dealers will inspect, and replace the valves, free of charge. The recall began on December 30, 2015. Owners may contact Daimler customer service at 1-800-745-8000. Daimler's number for this recall is FL-673.
Daimler Trucks North America (DTNA) is recalling certain model year 2014 Freightliner 108SD, 114SD, 122SD, Coronado, Argosy, Cascadia, M2 Business Class, and Western Star 4700, 4900, and 6900 vehicles manufactured August 5, 2013, through November 15, 2013; and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies." Remedy: DTNA will notify owners, and dealers will inspect and replace the seat belt buckle, as necessary, free of charge. The recall is expected to begin by January 26, 2014. Owners may contact Daimler at 1-800-385-4357. DTNA's number for this campaign is FL-654.
Daimler Trucks North America (DTNA) is recalling certain model year 2012-2014 Freightliner Cascadia tractors manufactured from April 12, 1210, through March 2, 2013, and equipped with a SAMCAB software version 6.2. On vehicles configured to have the turn signals operate as Daytime Running Lights (DRLs) and the 'Turn-Tip' turn signal function activated, the DRLs may not illuminate properly after using the 'Turn-Tip' function while driving. Remedy: DTNA sent notification to owners on May 6, 2015, instructing them to contact their dealers and arrange to have the free SAMCAB software updated to correct the operation of the DRLs and "Turn Tip" feature. Owners may contact DTNA at 1-800-547-0712.
Daimler Trucks North America (DTNA) is recalling certain model year 2013-2014 Freightliner Cascadia trucks manufactured December 11, 2012, through November 27, 2013 and equipped with a Meritor Wabco electronically controlled air suspension (ECAS) system. In the affected vehicles, the wiring harnesses for the ECAS may have been reversed. Remedy: DTNA will notify the owners, and dealers will inspect the ECAS wiring, correcting it as necessary, free of charge. The recall began on February 24, 2014. Owners may contact Daimler at 1-800-547-0712. DTNA's number for this recall is FL-656.
Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks equipped with "Fleet Engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck. Safety Risk: Reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash. Corrective Actions: Daimler Trucks of North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.
On certain trucks, a combination of brake vibrations and corrosion could cause the tie-rod tube to fatigue and break. This may lead to a disconnect between the front wheels and reduce the ability to steer the vehicle, which could increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Service Facilities will replace brake linings, brake spiders and tie rods as necessary.
On certain vehicles with air brakes, after several hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal. If the brake lights do not illuminate, following road users would be unaware of the intent of the driver to slow the vehicle, which could increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will repair the brake light pressure switch.
On certain vehicles, the specified front axle weight limit may be greater than the hub capacity. If the axle load exceeds the maximum weight capacity of the hub, there is an increased risk of hub fatigue, which could cause a complete separation of the wheel(s) and a loss of vehicle control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the incorrectly specified front axle hubs.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the brake caliper mounting bolts may have been insufficiently tightened during vehicle assembly. Loose bolts may allow a caliper to detach from its mount, which could result in partial loss of brake function. This could increase stopping distances, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will tighten the brake caliper mounting bolts to the specified torque.
On certain vehicles, the instrument panel may show an incorrect park brake message. If the ignition is switched OFF and the driver’s door opened (before the park brake is applied), the message “Park Brake On” may be incorrectly displayed instead of “Park Brake off Door Open”. Should the vehicle be parked on a sufficient slope, failure to apply the park brake could allow unintended vehicle movement, which could cause a crash resulting in property damage and/or personal injury. Correction: Dealers will update the Instrument Cluster Module software.
On certain vehicles with turn signals configured to act as Daytime Running Lamps (DRL), the DRL may not reactivate following turn signal operation. A loss of DRL illumination could render the vehicle less visible to other motorists and to pedestrians during daylight hours, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will reprogram vehicles with updated software.