Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2014 International Prostar, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Navistar, Inc. (Navistar) is recalling certain 2000-2001 International 4700, 2000-2002 4900, 2001-2003 8100 (TranStar) and 9100I, 2002-2003, 2005, 2007-2009, 2012-2014 and 2016-2018 DuraStar, 2012 and 2014-2017 ProStar, 2014-2015 TerraStar, and 2018 LT trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' fire extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf Remedy: Navistar will notify owners, instructing them to notify Kidde for a replacement fire extinguisher, free of charge. The recall is expected to begin February 9, 2018. Owners may contact Navistar customer service at 1-331-332-1590, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information.
Navistar, Inc. (Navistar) is recalling certain model year 2011-2014 International ProStar trucks manufactured May 18, 2010, to April 5, 2013, 2012-2014 International LoneStar trucks manufactured September 7, 2011, to March 25, 2013, and 2011-2013 International TranStar trucks manufactured October 18, 2010, to February 20, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage. Remedy: Navistar will notify owners, and Fontaine dealers will replace the fifth wheel with an Ultra NT model fifth wheel, free of charge. The recall began on November 18, 2015. Owners may contact Navistar customer service at 1-800-448-7825, or Fontaine customer service at 1-844-597-7393.
Navistar, Inc. is recalling certain model year 2014 International Prostar trucks manufactured September 2013 through December 2013, and equipped with feature code 14GXP 6X2 rear axles with 'R' hubs and Dual Track rear axles. In the affected vehicles, axle shafts of an incorrect length may have been installed which can cause the splines on the axles shafts to be only partially engaged into the side gears of the rear axle differential. Remedy: Navistar will notify owners, and dealers will replace the incorrect wheel hubs and axle shafts with the correct ones and replace any damaged side gears, free of charge. The recall began on March 18, 2014. Owners may contact Navistar at 1-800-448-7825. Navistar's number associated with this recall is 14506.
Navistar, Inc. (Navistar) is recalling certain model year 2013-2015 International DuraStar vehicles manufactured November 2012 through December 2013, International WorkStar vehicles manufactured December 2012 through January 2014, and 2014-2015 International TranStar and International ProStar vehicles manufactured January 2013 through February 2014. The affected vehicles are built with air disc brake feature codes 04WEY, 04WEZ, or 04WZK. These vehicles may have an incorrect number of bolts mounting the brake caliper to the caliper mounting plate and some of the bolts may be improperly torqued. Remedy: Navistar will notify owners, and dealers will replace any missing bolts and check the torque of all of the air disk brake caliper bolts, free of charge. The recall began on May 7, 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 14508.
Navistar, Inc. is recalling certain model year 2013-2014 International ProStar and DuraStar trucks manufactured April 26, 2012, to April 4, 2013, WorkStar trucks manufactured April 27, 2012, to March 29, 2013, LoneStar trucks manufactured May 21, 2012, to April 2, 2013, and TranStar trucks manufactured April 30, 2012, to March 25, 2013. In the affected vehicles, the accelerator pedal position sensor can move and result in a high engine idle. Remedy: Navistar will notify owners, and dealers will recalibrate the electronic control module (ECM) to allow it to recognize that the pedal is at the idle position, free of charge. The recall began on January 19, 2016. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15517.
Navistar, Inc. (Navistar) is recalling certain model year 2014-2017 International ProStar trucks manufactured June 11, 2013, through May 19, 2016. In the affected vehicles, the connection for the cube fuse terminal may break resulting in a total loss of power to the cab and an unexpected engine stall. Remedy: Navistar will notify owners, and dealers will replace the cube fuse with a chassis-mounted power distribution module (PDM), free of charge. An interim notice was sent to owners on September 14, 2016. The recall began on October 28, 2016. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 16508.
Navistar, Inc. (Navistar) is recalling certain model year 2011-2015 International DuraStar, ProStar, TranStar and WorkStar, 2012-2015 International TerraStar, 2013-2015 International LoneStar and IC Bus HC, and 2014-2015 IC Bus AC vehicles. A vehicle double battery jump start or electrical load dump event could result in an overvoltage condition of a component within the HVAC system linear power module (LPM) which is used to control the blower speed. The overvoltage condition could result in the overheating and failure of the LPM. Remedy: Navistar will notify owners, and dealers will replace the LPM with an upgraded one, free of charge. An interim letter was mailed to owners on June 18, 2015. A second notification will mailed when parts become available. The recall began on August 6, 2015. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15509.
Navistar, Inc. (Navistar) is recalling certain model year 2010-2015 International Lonestar vehicles manufactured October 12, 2009, to June 16, 2014, and 2009-2015 International ProStar vehicles manufactured December 16, 2008, to June 20, 2014. In the affected vehicles the electrical harness that supplies power to the HVAC system may not be of sufficient size for the electrical load of the circuit. This can result in an increase in resistance and heating at the connectors. Remedy: Navistar will notify owners, and dealers will replace the 60 amp relay and battery harness with a 150 amp relay and battery harness, free of charge. Navistar issued an interim notification to owners on December 29, 2014. The recall began on March 2, 2015. Owners may contact Navistar customer service at 1-331-332-1590. Navistar's number for this recall is 14516.
Navistar, Inc. is recalling certain model year 2013-2014 International ProStar sleeper cab vehicles manufactured December 12, 2012, through August 8, 2013 and equipped with feature code 16XSA, 16XSB, 16XSC or 16XSD chassis skirts. In the affected vehicles, the rear chassis skirt upper horizontal support S-bracket may rub the fuel tank causing a hole in the tank. Remedy: Navistar will notify owners, and dealers will reinstall the chassis skirt with proper clearance, free of charge. If necessary, the fuel tank will be replaced. The recall began on March 31, 2014. Owners may contact Navistar at 1-800-448-7825. Navistar's recall number is 13517.
Navistar, Inc. (Navistar) is recalling certain 2000-2003 International 8100, 2001-2003 International 9100i, 2001-2007 International 9400i, 2001-2010 International 9200i, 2002-2007, 2009 International 8500, 2003-2007, 2013 International 9900i, 2003-2018 International 8600, 2004, 2007 International 9900iX, 2008-2018 International ProStar, 2010-2011, 2013, 2016 International LoneStar, 2011-2012, 2016 International 4400, 2017-2024 International LT, 2018-2024 International RH, 2019-2021 International LS, 2019-2024 International MV vehicles. The back-up lights offer low visibility when the vehicle is in reverse and bobtail mode. Also, the vehicles have not been equipped with additional unobstructed back-up lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: Dealers will replace the existing rear stop/turn signal lights, free of charge. Owner notification letters were mailed May 06, 2024. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23514.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks, the backup lamps could be blocked and may not be visible. As a result, the trucks don't meet the requirements of the Canadian regulations. Note: This recall only affects trucks equipped with a pintle hook lowering bracket and feature code 01WPN, 01 WPS, or 01VAL. Safety Risk: Backup lamps that aren't visible could cause a person not to recognize that the vehicle is backing and increase the risk of a crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealership to install new tail stop/turn signal lamps with integrated backup lamps.
On certain vehicles equipped with the battery box mounted between the frame rails, the battery mounted cube fuse terminal connection could potentially break. A broken cube fuse terminal connection could cause the cab to lose all power which would result in a loss of motive power, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the cube fuse with a chassis mounted power distribution module (PDM) inside the battery box.
On certain vehicles equipped with Navistar engines, the accelerator pedal position sensor could move on its mounting bracket if the pedal is depressed with excessive force. If the sensor stator were to move out of position, it could change the sensor signal output, resulting in a high idle. On vehicles equipped with manual transmissions, if the clutch were to be depressed during operation, the engine could rise to governed RPMs resulting in difficulty selecting gears while shifting. In the condition of a loaded vehicle going down a long grade, the inability to down shift could cause difficulty in maintaining or reducing vehicle speed with just the service brakes, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will recalibrate the engine Electronic Control Module (ECM) to eliminate the high idle condition.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the fifth wheel locking mechanisms could be susceptible to damage and/or wear. This could cause the locking mechanism to fail properly engage, potentially resulting in a towed trailer unit separating from the truck tractor. As a result, the trailer could strike another vehicle, stationary object, or bystander, causing injury and/or damage to property. Correction: Fontaine dealers will replace all Ultra LT fifth wheel units with Ultra NT model fifth wheel units.
On certain vehicles, a double battery (24 volt) jump start or electrical load dump could result in an overvoltage condition of the linear power module (LPM) which is used to control the heater/air conditioning blower motor speed. If this were to occur, this overvoltage condition could lead to the LPM overheating, causing smoke, and increase the risk of fire, which could result in injury and/or damage to property. Correction: Dealers will replace the LPM with an upgraded design.
On certain vehicles equipped with a no-idle heating, ventilation and air conditioning (HVAC) module, the electrical harness supplying power to the module may not be of sufficient size, which could cause a voltage drop in the harness and an increase in resistance and heating at the connector. This could cause a fire, potentially resulting in injury and/or damage to property. Correction: Dealers will install a revised harness.
Certain trucks may not comply with Canadian Motor Vehicle Safety Regulations. Vehicles may not bear a compliance label, or the compliance label may be missing Gross Vehicle Weight Rating (GVWR) information. This could result in vehicle overloading, increasing the risk of a crash causing injury and/or damage to property. Correction: Owners will be sent a revised compliance label.
On certain vehicles equipped with air disc brakes, the brake caliper bolts may have been insufficiently tightened, or an insufficient number of bolts may have been installed at time of vehicle assembly. Loose or missing bolts could allow a caliper to detach from its mount, resulting in partial loss of brake function, which could increase stopping distance and increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace missing bolts, if any, and tighten all caliper bolts to the specified torque.
On some vehicles, a support bracket may contact the fuel tank during frame twist, which could puncture the fuel tank, resulting in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a fire. Fuel leakage onto the roadway could also increase the risk of a crash for other road users. In both cases, injury and/or property damage could result. Correction: Dealers will inspect and affect repairs.