Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2014 Kia Forte, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Kia Motors America (Kia) is recalling certain 2012-2013 Sorento, 2012-2015 Forte and Forte Koup, 2011-2013 Optima Hybrid, 2014-2015 Soul, and 2012 Sportage vehicles. An engine compartment fire can occur while driving. Remedy: Kia will notify owners, and dealers will inspect the engine compartment for fuel and/or engine oil leaks, perform an engine test and make any repairs, including engine replacement, as necessary, free of charge. In addition, Kia dealers will update the Knock Sensor Detection System (KSDS) software, free of charge. The recall began January 27, 2021. Owners may contact Kia customer service at 1-800-333-4542. Kia's number for this recall is SC200.
Kia Motors America (Kia) is recalling certain 2012-2014 Forte and Forte Koup vehicles. The brake pedal stopper pad can deteriorate allowing the brake light switch plunger to remain extended when the brake pedal is released. This will allow the brake lights to remain illuminated continuously. It can also allow the shift lever to be moved without depressing the brake pedal, or activate the engine management brake pedal override feature. Remedy: Kia will notify owners, and dealers will replace the brake pedal stopper pad, free of charge. The recall is expected to begin January 30, 2018. Owners may contact Kia customer service at 1-800-333-4542. Kia's number for this recall is SC158.
Kia Motors America (Kia) is recalling certain model year 2014 Kia Forte vehicles manufactured December 5, 2012, to April 17, 2014. In the affected vehicles, the cooling fan resistor may overheat and melt. Remedy: Kia will notify owners, and for vehicles produced from December 5, 2012 to January 27, 2014, dealers will replace the cooling fan resistor and multi-fuse unit. For vehicles produced from January 28, 2014 to April 17, 2014, dealers will replace the multi-fuse unit only. Owners of vehicles with a 1.8L engine will also have the engine control unit software updated. The recall began on February 20, 2015. Owners may contact Kia customer service at 1-800-333-4542. Kia's number for this recall is SC113.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain vehicles, the inspection completed by a Kia dealer during service campaign SC044 (Transport Canada recall number 2022-222) may not have been done correctly. As a result, a second inspection is required. Over time, the brake lines under the vehicle could corrode. If this happens, a brake line could fail and leak. A brake fluid leak can result in reduced braking. Note: This service campaign replaces service campaign SC044 (Transport Canada recall number 2022-222). Vehicles that had brake lines replaced under that service campaign don't require this inspection. Safety Risk: Reduced braking can cause extended stopping distances and increase the risk of a crash. Corrective Actions: Kia will notify owners by mail and advise you to take your vehicle to a dealership to inspect the brake lines. The dealer will apply an anti-corrosion treatment and replace the brake lines, if required.
Issue: Over time, the brake lines under the vehicle could corrode. If this happens, a brake line could fail and leak. A brake fluid leak can result in reduced braking. Safety Risk: Reduced braking can cause extended stopping distances and increase the risk of a crash. Corrective Actions: Kia will notify owners by mail and advise you to take your vehicle to a dealership to inspect the brake lines. The dealer will apply an anti-corrosion treatment and replace the brake lines, if required.
Issue: On certain vehicles equipped with a 2.0 L NU GDI or 2.4 L Theta II MPI engine, an engine compartment fire could occur while driving. Kia is conducting this recall as a preventative measure to prevent fire risk due to potential fuel leaks, oil leaks and/or engine damage. In some situations, you may notice any of the following symptoms: there could be an abnormal knocking noise from the engine; the check engine light and/or the oil pressure warning light could turn on; you may smell fuel, burning or smoke; or you may notice oil leaks. If you continue to drive the vehicle with these symptoms, the engine could fail and/or a fire could occur. An engine failure can cause a sudden loss of power with an inability to restart. Note: For the Optima model, only the Optima Hybrid is affected by this recall. Safety Risk: An engine compartment fire can create a risk of injury. A sudden loss of engine power could increase the risk of a crash. Corrective Action: Kia will notify owners by mail and instruct you to take your vehicle to a dealer for an inspection of the engine and engine compartment. The dealer will inspect for fuel and/or engine oil leaks, perform an engine test and make any repairs, including engine replacement, if necessary. Kia will also perform a Knock Sensor Detection System (KSDS) software update free of charge, once it is available for your vehicle. This update will detect and prevent engine damage from worn connecting rod bearings.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
Due to a manufacturing error, the engine might overheat due to fuel or oil leaks and subsequently break down. This may endanger the following traffic and can cause a fire. Production: 11.01.2011 – 13.09.2018. Types: TF, JF, XM, FL, SL, YD; e4*2007/46*0255*, e4*2007/46*1018*, e11*2007/46*0634*.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the brake pedal stopper pad material could deteriorate over time and allow the stop lamp switch plunger to remain extended when the brake pedal is released. This could result in the stop lamps illuminating continuously, which would result in following road users being unaware of the driver's intentions. Additionally, it could result in activation of the engine management system’s brake pedal override feature, the illumination of the traction control warning lamp, and/or the ability to move the shift lever without depressing the brake pedal, which could result in unintended vehicle movement. These conditions could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the brake pedal stopper pad.
On certain vehicles, the cooling fan resistor could be defective. If this occurs; the resistor could overheat and melt creating a potential risk of fire that could cause injury and/or property damage. Correction: Dealers will replace the cooling fan resistor and multi-fuse unit.