Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2014 Mercedes-Benz Sprinter 2500, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Morgan Olson Corporation (Morgan Olson) is recalling certain model year 2014 Sprinter 2500 vehicles manufactured May 30, 2014, to August 1, 2014. The affected vehicles may have an aluminum document holder installed in the cab side of the load area partition that an unbelted occupant may strike in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 201, "Occupant Protection in Interior Impact." Remedy: Morgan Olson will notify owners, and dealers will relocate the document holder, free of charge. The recall began on December 4, 2014. Owners may contact Morgan Olson customer service at 1-800-262-3437.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2014-2017 Freightliner Sprinter 2500 and 3500 and Mercedes-Benz Sprinter 2500 and 3500 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. Remedy: DVUSA will notify owners, and dealers will replace the front passenger air bag module, free of charge. The recall began March 15, 2019. Owners may contact DVUSA customer service at 1-877-762-8267.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2013-2016 Mercedes-Benz Sprinter 2500 and 3500 and Freightliner Sprinter 2500 and 3500 vans. These vehicles were manufactured without a reinforcement plate and protective bracket on the air bag control unit. As a result, the air bag control unit may not remain functional after the initial impact, possibly preventing additional air bags from deploying in response to a secondary impact. Remedy: DVUSA will notify owners, and dealers will install a reinforcement plate and protective bracket around the air bag control unit, free of charge. The recall began on May 26, 2017. Owners may contact DVUSA customer service at 1-877-762-8267.
Midwest Automotive Designs, LLC (Midwest) is recalling certain Custom Vans and Camper Van recreational vehicles built on 2014-2017 Mercedes Benz Sprinter chassis and 2016-2017 RAM Promaster chassis. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' fire extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf Remedy: Midwest will notify owners, and dealers will replace the fire extinguisher with a different brand, free of charge. The recall began on December 11, 2017. Owners may contact Kidde customer service for their replacement extinguisher at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information.
Daimler Vans USA, LLC (Daimler Vans) is recalling certain model year 2007-2009 Dodge Sprinter 2500 and 3500 vehicles manufactured July 1, 2006, to July 31, 2008, 2007-2014 Freightliner Sprinter 2500 and 3500 vehicles manufactured July 1, 2006, to July 1, 2014, and 2010-2014 Mercedes Benz Sprinter 2500 and 3500 vehicles manufactured July 1, 2010, to July 1, 2014. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture. Remedy: Daimler Vans will notify the Mercedes-Benz and Freightliner owners and Fiat Chrysler will notify the Dodge owners. The respective dealers will replace the driver frontal air bag inflator, free of charge. The recall began March 31, 2017. Mercedes-Benz and Freightliner owners may contact Daimler Van's customer service at 1-877-762-8267. Dodge owners may contact Fiat Chrysler customer service at 1-800-853-1403.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the driver-front airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional note: This recall supersedes recall 2016-159.
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional note: This recall supersedes recall 2018-648.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
A chemical change in the active substance in the front airbag gas generator can cause an increase in the internal pressure. In the event of an accident, the gas generator may burst and injure the occupants of the vehicle with metal fragments. Furthermore, the airbag will not unfold and protect properly in this situation. Production: 2006-2015. Types: e1*2001/116*0354/04; e1*2007/46*0279*02 - e1*2007/46*0301*14 - e1*2007/46*0279*09 - e1*2007/46*0301*13.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag module. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Note: This recall is superseded by recall 2019455. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019455">recall 2019455</a> for more information.
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag module. Note: This recall is superseded by recall 2019454. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019454">recall 2019454</a> for more information.