Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2014 Toyota Highlander, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Fujian Wanda Automobile Glass Industry (Wanda) is recalling certain aftermarket Replacement Windshields sold for use in 2014-2018 Toyota Highlander vehicles. The windshields have an attached wire harness that water may leak into, possibly causing damage to the vehicle's Engine Control Module (ECM). Remedy: Wanda will notify owners, and service centers will replace the windshields, and inspect the ECM for damage, having it replaced, as necessary, free of charge. The recall began January 29, 2019. Owners may contact Wanda customer service at 1-864-281-2760.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Highlander and Highlander Hybrid vehicles. The affected vehicles may have improper software installed in the air bag electronic control unit (ECU) for the operation of the front passenger seat belt force limiter, and as a result, the force limiter may use the restraint setting designed for small occupants, such as those that weigh approximately 110 pounds, for all occupants regardless of their size. As such, some of these vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection." Remedy: Toyota will notify owners, and dealers will install a software update in the air bag electronic control unit, free of charge. The recall began on June 27, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Toyota Avalon, Camry, Sienna, and Highlander and model year 2015 Lexus RX350 vehicles. Fuel may leak from the one of the fuel delivery pipes in the engine compartment. Remedy: Toyota will notify owners, and dealers will replace any of the suspect fuel delivery pipes free of charge. The recall began November 17, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Highlander vehicles manufactured April 23, 2014, through April 29, 2014. The affected vehicles may have a second row right-hand seat assembly that does not fully lock into the inboard seat track in the forward first, second and third adjusting positions. As such, these vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems." Remedy: Toyota will notify owners, and dealers will inspect and, if necessary, replace the second row right-hand seat, free of charge. The recall began in July 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota is recalling certain model year 2014 Highlander vehicles manufactured November 20, 2013, through January 18, 2014. The third row middle seat belt assembly might not have been properly secured to the vehicle floor anchorage during vehicle assembly. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages." Remedy: Toyota will notify owners, and dealers will inspect the third row middle seat belt anchor, and, if necessary, properly secure it to the vehicle floor anchorage, free of charge. The recall is expected to begin in March 2014. Owners may contact Toyota at 1-800-331-4331.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Issue: On certain vehicles, the hook and loop material used to attach the carpet to its underpadding may not be flame resistant. As a result, when it is tested alone, the loop fasteners do not meet the requirements of Canadian regulations. Safety Risk: As the carpet is always assembled, and the loop fasteners are very small, this problem does not create a safety risk. Corrective Action: This is not a recall. The company has made production changes to ensure that all new vehicles meet the requirements of Canadian regulations.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
Production: The vehicles in question were produced between 19 March 2013 and 30 August 2013.. Types: Unknown.
Production: The concerned vehicles were manufactured between November 2013 and May 2014. . Types: Model: 2014 MY Highlander / Highlander HV.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the end cap on the right-hand side fuel delivery pipe, located in the engine compartment, could have been improperly welded at time of manufacture. This could result in a fuel leak which, in the presence of an ignition source, could result in a fire causing injury and/or property damage. Correction: Dealers will inspect the fuel delivery pipe and replace with a revised part if necessary.
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection. A defect in the programming of the occupant classification system could limit the seat belt loading to the front passenger seat occupant in a crash, which could result in non-compliance to the standard and increase the risk of injury. Correction: Dealers will reprogram the occupant classification module.