Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2014 Volvo VNL, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Volvo Trucks North America (Volvo) is recalling certain model year 2013-2017 VNL and VNM trucks and certain model year 2017 VNX trucks. In the affected vehicles, incorrect software for controlling the electronic air dryer may result in oil and water contaminating the brake system. Remedy: Volvo will notify owners, and dealers will reprogram the vehicle control module and replace the air dryer filter, free of charge. The recall began on February 16, 2017. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1608.
Volvo Trucks North America (Volvo) is recalling certain model year 2012-2015 VNL and VNM trucks manufactured May 31, 2011, to December 1, 2014. In the affected trucks, the trailer hand brake handle may not to return to the off position due to being restricted by the cut out in the trim panel. Remedy: Volvo will notify owners, and dealers will inspect the trim panel slot and make it longer, as necessary, free of charge. The recall began on October 19, 2015. Owners may contact Volvo customer service at 1-800-258-6586. Volvo's number for this recall is RVXX1504.
Volvo Trucks North America (Volvo) is recalling certain model year 2013-2015 VNL trucks, and 2013-2014 VNM trucks equipped with certain Cummins Westport Model ISL G and ISX12 G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. Remedy: Cummins Inc. and Cummins Wesport Inc. will notify owners, and authorized Cummins service facilities will upload a new ECM calibration, free of charge. The recall began on April 12, 2014. Owners may contact Volvo at 1-800-528-6586. Volvo's number for this recall is RVXX1401.
Volvo Trucks of North America (Volvo) is recalling certain model year 2011-2015 VNL and 2014-2015 VNM trucks manufactured November 17, 2010, through February 5, 2014, and equipped with enhanced cruise control and without side fairings. In the affected vehicles, the active braking component of the enhanced cruise control can become disabled. Remedy: Volvo will notify owners, and dealers will update the control unit software, free of charge. The recall began on August 12, 2014. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1402.
Volvo Trucks North America (Volvo) is recalling certain model year 2012, 2014-2015 VHD, 2012-2015 VNL, and 2014-2015 VNM trucks manufactured June 16, 2011, to August 18, 2014, and equipped with the Eco-Roll option. The affected trucks may fail to re-engage the vehicle drivetrain after using the Eco-Roll feature. Remedy: Volvo has notified owners, and dealers will update the Eco-Roll software, free of charge. The recall began on December 10, 2014. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1406.
Volvo Trucks North America (Volvo) is recalling certain model year 2014-2015 VAH, VNL, and VNM trucks manufactured March 4, 2013, to April 28, 2014. Due to the bolts holding the disc brake caliper to the backing plate not being tightened to the specified torque, the disc brake caliper may detach from the backing plate. Remedy: Volvo will notify owners, and dealers will inspect and tighten the bolts to specification, as necessary, free of charge. The recall began October 10, 2014. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1403.
Volvo Trucks North America (Volvo) is recalling certain model year 2012-2014 Volvo VNL trucks manufactured December 1, 2011, to September 1, 2013, equipped with certain Electric Auxiliary Power Units (APU), part number BA600, manufactured by Idle Free Systems (IFS). The affected APUs have metal housings whose mounting points may crack and tear. Additionally, the mounting bolts of the power units may loosen or possibly fail. Remedy: Volvo will notify owners and IFS dealers will inspect the APU for damage and, where needed, install a welded gusset upgrade kit to strengthen the APU C-channels. All units will receive stronger clamping brackets. The recall began on December 10, 2015. Owners may contact Volvo customer service at 1-800-528-6586, or IFS customer service at 1-920-206-9333. Volvo's number for this recall is RVXX1506.
Volvo is recalling certain model year 2012-2014 VHD, VNL, and VNM trucks, manufactured from April 18, 2011, through March 14, 2013, and equipped with a horizontally mounted remote battery disconnect switch. The remote battery disconnect switch was manufactured with incorrect hardware allowing the cables to loosen. Additionally, as mounted, the cables may vibrate and chafe. Remedy: Volvo will send owners an interim letter and dealers will replace and relocate the remote battery disconnect switch. The recall began on May 7, 2013. Owners may contact Volvo's recall support line at 1-877-800-4945 and select option 1.
Volvo Trucks North America (Volvo) is recalling certain model year 2011-2014 VAH and VNL trucks manufactured May 12, 2010, to October 31, 2014. The affected vehicles may experience premature tire failure during certain operating conditions such as high speeds, heavy load, and high road temperature. Remedy: Volvo will notify owners, and dealers will replace the tires and set the road speed limiter, free of charge. The recall began on January 16, 2015. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1405.
Volvo Trucks North America (Volvo) is recalling certain model year 2007-2014 VAH, VHD, VNL, VNM, and VT models. The affected vehicles were built without a redundant clutch disengagement switch. Without a redundant switch, a loss of signal from the brake air pressure switch can prevent the clutch from automatically disengaging when the brake is applied. Remedy: Volvo Trucks will notify owners and dealers will inspect and repair the vehicles if necessary. The recall began on August 26, 2013. Volvo's recall number is RVXX1303. Owners may contact Volvo at 1-336-393-2000.
Volvo Trucks North America (Volvo) is recalling certain model year 2014 VAH, VHD, VNL, and VNM trucks manufactured August 12, 2013, through November 14, 2013; and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies." Remedy: Volvo will notify owners, and dealers will inspect and replace the seat belt buckle, as necessary, free of charge. The recall began on January 27, 2014. Owners may contact Volvo at 1-336-393-2000. Volvo's number for this recall is RVXX1307.
Volvo Trucks North America is recalling certain model year 2013-2014 VNL vehicles manufactured April 2, 2012, through May 3, 2013; and equipped with a Meritor RPL-20 driveline transmission. The driveshaft is too weak for this application and may fail. Remedy: Volvo will notify owners, and dealers will replace the driveshaft, free of charge. The recall began on October 9, 2013. Owners may contact Volvo at 1-336-393-2000. Volvo's recall number is RVXX1305.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles equipped with an electronic air dryer, the operating parameters may have been set incorrectly. This could allow condensation into the air brake system, potentially affecting brake system function in cold weather conditions and increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will reprogram the vehicle control unit.
On certain vehicles, the draglink ball socket boot may be damaged due to the angle of the ball stud. This could cause contaminants to enter the ball socket and cause corrosion, accelerating the wear of the ball. If left untreated, the ball joint could separate from the socket resulting in complete loss of steering, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the draglink.
On certain vehicles with a governed road speed setting of 113 kilometers per hour (70MPH) or more that are outfitted with 295/60 R22.5 XZA2 Energy Tires and used in an auto transport application (i.e. truck modified with frame mounted to the truck to carry automobiles over the truck's front axle), a premature tire failure may occur on the front or steer axle as a result of certain operating conditions (high speeds, load and road temperature). A tire failure could cause the driver to lose vehicle control, which may result in a crash causing injury and/or property damage. Correction: Dealers will replace the tires and set the road speed governor.
On certain vehicles equipped with Eco-Roll, which allows the transmission to disengage from the engine in certain situations to conserve fuel, a defect in the software may prevent the drivetrain from reengaging when coming out of Eco-Roll. This could occur without prior warning and under certain conditions, extend stopping distances, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will update vehicle software.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, bolts that hold the brake caliper to the backing plate may not have been tightened to specification, and could allow the brake caliper to separate from the backing plate. This would disable braking at the affected wheel, which could cause the vehicle to pull to one side during braking, and also increase stopping distances, which could result in a crash causing injury and/or damage to property. Correction: Dealers will inspect bolts and repair as required.
On certain model vehicles with a D16 engine, engine software parameters may have been incorrectly set at time of manufacture, which could cause the engine to stall. This would result in a loss of motive power and affect functioning of the power steering system as well as other safety systems. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will update vehicle software.
On certain model vehicles outfitted with enhanced cruise control and without side fairings, a programming error could result in the active braking feature of the enhanced cruise control to be disabled. As a result, the enhanced cruise control system may not automatically activate the brakes as designed. This could possibly result in a crash causing injury and/or property damage. Correction: Dealers will update the software of the control unit.
On certain trucks, the seat belts may not comply with Canada Motor Vehicle Safety Standard 209 - Seat Belt Assemblies. Due to a defect in manufacturing, the seat belt buckle may not release as required by the standard. This could hinder egress from the vehicle in an emergency, increasing the risk of injury. Correction: Dealers will inspect and, if necessary, replace affected seatbelt buckles.
On certain vehicles, the secondary clutch disengagement switch may have been omitted during vehicle assembly or, in some instances, removed during servicing. As such, primary switch failure would cause the automated manual transmission’s clutch to remain engaged when the brakes are applied. This could increase stopping distances, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will install a micro-switch at the brake pedal and update the software to run a diagnostic on the switch during engine start-up.
On certain trucks, the battery cables were fastened to the remote battery disconnect switch using incorrect hardware. In addition, the cables may be prone to chafing and vibration. Both issues could lead to electrical arcing, which could result in a fire causing property damage and/or personal injury. Correction: Dealers will relocate the remote battery disconnect switch module.