Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2015 Freightliner Business Class M2, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2014-2019 Freightliner Business Class M2 vehicles. The retaining clip that connects the transmission oil cooler line to the in-tank oil cooler may fail, possibly resulting in a transmission fluid leak. Remedy: DTNA will notify owners, and dealers will replace the retaining clip with a collar and clamp connection, free of charge. The recall began on April 9, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-874.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2012-2015 Freightliner Cascadia, Coronado, Business Class M2, 114SD, and Western Star 4900 trucks. In certain front axle, brake lining, and brake spider combinations, braking may cause high vibrations, resulting in early failure of the tie-rod tube. Remedy: DTNA will notify owners, and dealers will replace the brake linings, brake spider, and tie-rod, free of charge. The recall began March 22, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL782.
Daimler Trucks North America, LLC (DTNA) is recalling certain model year 2015-2016 Freightliner Cascadia, Business Class M2, 108SD, 114SD, and Western Star 4700 trucks manufactured January 4, 2015, to April 24, 2015, and equipped with Eaton Fuller FR 10-speed manual transmissions. In the affected vehicles, when the transmission shift lever is moved from reverse to neutral, the reverse gear may stay engaged. When the transmission shift lever is moved from reverse to a forward gear position, the transmission may mechanically lock because both the reverse gear and forward gear are simultaneously engaged. Remedy: DTNA will notify owners, and dealers will inspect and repair the affected transmissions if necessary, free of charge. The recall began on November 24, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-693.
Daimler Trucks North America (DTNA) is recalling certain 2015-2017 Freightliner M2 Business Class, 108SD, and 114SD vehicles. The affected vehicles might not have a required check valve installed in one of the ports of the spring brake modulation valve. Without the valve, the primary air system is not isolated from the secondary air system. Remedy: DTNA will notify owners, and dealers will inspect the vehicles, installing a check valve, as necessary, free of charge. The recall began on August 24, 2017. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-740.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2017 Freightliner M2 Business Class, 108 SD, 114 SD, Cascadia, Coronado, Western Star 4700, 4800, and 5700 XE trucks manufactured March 15, 2013, to July 29, 2016 and equipped with Conmet aluminum non-high capacity hubs. These vehicles specify a front axle weight limit that may be greater than that of the hub capacity. As a result, the hub may fail and the wheel may separate from the axle. Remedy: DTNA will notify owners, and dealers will replace the front axle hubs, free of charge. The recall began during November 2016. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-718.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2016 Freightliner Business Class M2, 108SD, and 114SD trucks manufactured April 30, 2013, to September 14, 2015. Due to incorrect positioning, the rear disk brake calipers may contact the spring suspension reducing rear brake performance. Remedy: DTNA will notify owners, and dealers will correct the orientation of the rear brake calipers, free of charge. The recall began on November 13, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-688.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2015 Freightliner Cascadia, Business Class M2, 108SD, 114SD, 122SD, Coronado, Western Star 4700, and Western Star 4900 trucks manufactured October 6, 2014, to February 16, 2015, and equipped with Haldex Life Seal brake chambers. The affected vehicles may experience brake drag due to an improperly seated diaphragm in the brake chamber. Remedy: DTNA will notify owners, and dealers will replace the brake chambers, free of charge. Owners were mailed interim notices at the end of May 2015. The recall began on September 25, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL676.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2010-2017 Freightliner M2 Business Class, 108SD, 114SD, and Columbia trucks manufactured from January 6, 2010, through February 29, 2016, equipped with certain Bendix rear disk brakes and spring suspensions. The rear disk brake caliper may have been installed incorrectly, thus allowing the caliper to contact the suspension. Remedy: DTNA will notify owners, and dealers will correct the orientation of the rear brake calipers, as necessary, free of charge. The recall began on June 8, 2016. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's recall number for this campaign is FL-705.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2015 Freightliner Business Class M2, 108SD, 114SD, 122SD, Coronado, Columbia Glider, Argosy Glider, Western Star 4700, and Western Star 4900 trucks manufactured September 17, 2014, to November 10, 2014 equipped with Haldex Life Seal brake chambers. The affected vehicles may experience brake drag due to an improperly seated diaphragm in the brake chamber. Remedy: DTNA will notify owners, and dealers will inspect and repair the diaphragm if necessary, free of charge. Owners were sent an interim notice on January 27, 2015. The recall began on September 25, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-676.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2015 Freightliner Business Class M2 vehicles manufactured June 4, 2014, to December 1, 2014 that are equipped with hydraulic brakes and a Bosch Hydro-Max Brake Boost Pump. Due to an incompatibility between the boost pump switch and the instrument cluster, certain instrument display brake warnings may not illuminate correctly when there is a problem with the brake system. Remedy: DTNA will notify owners, and dealers will install the correct brake switch, free of charge. The recall began on April 13, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-677.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2015 Freightliner Business Class M2 trucks manufactured May 27, 2014, to September 25, 2014, and equipped with certain models of Eaton Fuller 365mm clutches. Due to an incorrect clutch-release bearing component, the affected clutches may not disengage as needed. Remedy: DTNA will notify owners, and dealers will inspect and replace the clutches, as necessary, free of charge. The recall began on December 8, 2014. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-670.
Daimler Trucks North America, Inc. (DTNA) is recalling certain model year 2015-2016 Freightliner 108SD, 114SD, Business Class M2, and Western Star 4900 vehicles manufactured September 26, 2014, to November 6, 2015, and equipped with certain drive axles manufactured by Marmon-Herrington. The affected axles have hex nuts on the flange yoke that may not have been properly tightened. Remedy: DTNA will notify owners, and dealers will inspect the hex nuts, tightening them as necessary, free of charge. The recall began on February 5, 2016. Owners may contact DTNA customer service at 1-800-745-8000, or Marmon-Herrington customer service at 1-800-547-0712. DTNA's number for this recall is FL-699.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2015-2020 Freightliner Business Class M2 emergency vehicles equipped with certain Cummins diesel engines. The engine protection and inducement software may cause the engine to shut down unexpectedly. Remedy: Cummins will update the electronic control module software and install a corrected data plate, free of charge. Owner notification letters were mailed February 5, 2025. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is F1012.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: Certain trucks were built with tires that are not approved for use with the truck's wheels. As a result, the tires may not perform properly, or a tire could fail. Safety Risk: A tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail. The corrective actions for this recall are under development. You will be instructed to bring your truck to a DTNA authorized service facility when a repair is available.
Issue: On certain trucks, the retaining clip on the transmission oil cooler line may fail. If this happens, the cooler line could detach from the radiator. This can result in a transmission fluid leak. Safety Risk: A transmission fluid leak could create a hazard for others by making the road slippery. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect and repair the transmission fluid cooler lines connections on the radiator tank.
Issue: On certain trucks equipped with "Fleet Engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck. Safety Risk: Reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash. Corrective Actions: Daimler Trucks of North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain trucks equipped with electronic stability control (ESC), the brake lights may turn on when the automatic traction control (ATC) activates. Canadian regulations do not allow brake lights to turn on when the automatic traction control activates. Safety Risk: Brake lights that turn on when a vehicle is not slowing could confuse other drivers. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility. The truck will either be reprogrammed or retrofitted so the brake lights do not turn on when the automatic traction control (ATC) activates.
Issue: Certain trucks were built with air reservoir tanks that are too small in relation to the size of the air brake chambers. Canadian regulations require enough air reservoir capacity to ensure the brakes work even with heavy use or when there is a partial loss of the air system. Safety Risk: Reduced braking could cause extended stopping distances and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility to modify the truck to ensure it meets Canadian regulations.
On certain trucks, a combination of brake vibrations and corrosion could cause the tie-rod tube to fatigue and break. This may lead to a disconnect between the front wheels and reduce the ability to steer the vehicle, which could increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Service Facilities will replace brake linings, brake spiders and tie rods as necessary.
On certain vehicles equipped with Kidde fire extinguishers with black plastic handles and valves, the fire extinguishers may become clogged or require excessive force to activate. Also, the nozzle may detach from the valve assembly with enough force that it could cause injury, and fail to discharge. In case of fire, failure of the extinguisher to function could result in injury and/or property damage. Correction: Owners will be provided with instructions on how to inspect the fire extinguisher to see if it is recalled. Replacement fire extinguishers will be supplied by Kidde directly. Note: For more information about recalled fire extinguishers, please visit <a href="https://inmarmarketaction.com/kidde/Kidde284CA/">www.kidde.com</a>.
On certain vehicles, the specified front axle weight limit may be greater than the hub capacity. If the axle load exceeds the maximum weight capacity of the hub, there is an increased risk of hub fatigue, which could cause a complete separation of the wheel(s) and a loss of vehicle control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the incorrectly specified front axle hubs.
On certain vehicles, the rear disk brake calipers may contact the spring suspension due to incorrect caliper orientation. This could reduce rear brake effectiveness which would result in increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will correct the orientation of the rear calipers.
On certain vehicles equipped with Cummins ISB or ISL engines, the fuel filter shell and nut plate could separate, causing a fuel leak and also causing the engine to stall. Stalling would result in a loss of motive power, increasing the risk of a crash resulting in injury and/or damage to property. Correction: Cummins-authorized dealers will replace the fuel filter.
On certain vehicles, the rear disk brake calipers may contact the spring suspension due to incorrect caliper orientation. This could reduce rear brake effectiveness which would result in increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will correct the orientation of the rear calipers.
On certain vehicles equipped with Cummins Westport ISL-G engines, excessive engine crankcase pressure could cause the vent tube assembly molded rubber adapter to detach from the breather. This could allow engine oil to come in contact with hot surfaces, increasing the risk of fire resulting in injury and/or damage to property. Correction: Dealers will install clamps at both ends of the adapter of the breather tube assembly and reprogram the Electronic Control Module (ECM) to improve diagnostic capabilities.
On certain vehicles equipped with a hydraulic brake booster, an incorrect switch may have been installed, potentially disabling brake warning lights in the instrument panel. As a result, warning lights may fail to illuminate in the event of a reduction in brake power assist, causing an unexpected increase in braking effort, which could increase stopping distances and increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will install the correct switch.
On certain vehicles, brake chamber diaphragm(s) may not be properly seated. This could lead to brake drag, causing brake overheating or unintended spring brake application. These issues could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will affect repairs as necessary.
On certain vehicles equipped with an Auto-park brake feature, the parking brake may apply unintentionally when the vehicle experiences a severe road vibration, such as travelling over a highway rumble strip at highways speeds. This severe vibration may cause air to pass through the solenoid valve, resulting in increased air pressure to the control port and potentially causing the dash-mounted park brake valve to pop out, causing an unintended park brake application without brake light illumination. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the auto-park solenoid valve and its mounting bracket.