Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2015 GMC Canyon, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
General Motors LLC (GM) is recalling certain 2015-2016 GMC Canyon and Chevrolet Colorado, and 2016 Chevrolet Volt vehicles. The driver's frontal air bag may improperly inflate during second-stage deployment in the event of a high speed crash. Remedy: GM will notify owners, and dealers will replace the driver's frontal air bag module, free of charge. The recall began November 8, 2017. Owners may contact Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 17387.
General Motors LLC (GM) is recalling certain 2015-2018 GMC Canyon, 2016-2017 Buick Envision, 2016-2018 Chevrolet Colorado and Malibu, 2017-2018 GMC Acadia, 2018 Buick LaCrosse, Cadillac ATS, Chevrolet Equinox, and GMC Terrain vehicles. The high pressure fuel pump may detach from its mounting flange, possibly resulting in the pump damaging the high pressure fuel line. Remedy: GM will notify owners, and dealers will replace the high pressure fuel pump, and high pressure fuel pipe, free of charge. The recall began July 2, 2018. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 18188.
General Motors LLC (GM) is recalling certain model year 2015 Chevrolet Colorado and GMC Canyon vehicles manufactured January 6, 2014, to October 1, 2014. In the affected vehicles, the driver air bag connections may have been wired incorrectly. This could reverse the deployment sequence and disrupt the deployment timing of the driver air bag. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 208, "Occupant Crash Protection." Remedy: GM will notify owners, and dealers will reprogram the inflatable restraint sensing and diagnostic module (SDM), free of charge. The recall began on October 6, 2014. Owners may contact GM customer service at 1-800-222-1020 (Chevrolet) or 1-800-462-8782 (GMC). GM's number for this recall is 14690.
General Motors LLC (GM) is recalling certain model year 2015 Chevrolet Colorado and GMC Canyon trucks manufactured January 6, 2014, to April 1, 2015. In the affected vehicles, the hooks that secure the driver's and/or front passenger's seat frame may not have been properly attached to the vehicle body during assembly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems." Remedy: GM will notify owners, and dealers will inspect the seats, correcting their installation as necessary, free of charge. The recall began on June 2, 2015. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service 1-800-462-8782. GM's number for this recall is 15150.
General Motors LLC (GM) is recalling certain model year 2015 Chevrolet Colorado vehicles manufactured January 6, 2015, to March 17, 2015, and 2015 GMC Canyon vehicles manufactured January 6, 2015, to March 19, 2015. A poor electrical connection within the steering gear connector may cause a loss of power steering assist. Remedy: GM will notify owners, and dealers will replace the steering gear torque sensor cover assembly, free of charge. The recall began March 1, 2016. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-800-462-8782. GM's number for this recall is 15595.
General Motors LLC (GM) is recalling certain model year 2015 Chevrolet Colorado, and GMC Canyon trucks manufactured January 6, 2014, to December 24, 2014. The affected vehicles may experience the front brake calipers leaking brake fluid. This is due to air pockets, an imperfection in the metal caliper body. Remedy: GM will notify owners, and dealers will inspect and replace the front-brake calipers if necessary, free of charge. The recall began June 9, 2015. Owners may contact GM customer service at 1-800-222-1020 (Chevrolet), or 1-800-462-8782 (GMC). GM's number for this recall is 14888.
General Motors LLC (GM) is recalling certain model year 2015 Chevrolet Colorado vehicles manufactured September 15, 2014, to January 21, 2015, and 2015 GMC Canyon vehicles manufactured October 3, 2014, to December 9, 2014. The affected vehicles have a front driver air bag inflator that may be misaligned to the air bag module backplate. This can cause the inflator to separate from the backplate during a deployment. Remedy: GM has notified owners, and dealers will inspect the driver air bag module inflator for proper alignment, replacing the air bag, as necessary, free of charge. The recall began March 19, 2015. Owners may contact Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 15037.
General Motors, LLC (GM) is recalling certain 2015 Chevrolet Colorado and GMC Canyon vehicles. The power steering assist may be lost due to a poor electrical connection within the steering gear assembly. Remedy: GM will notify owners, and dealers will replace steering gear torque sensor cover assembly, free of charge. Owner notification letters were mailed August 6, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020, and GMC customer service at 1-800-462-8782. GM's number for this recall is N202325410.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks, a poor electrical connection could cause a sudden loss of power steering assist. Note: This recall does not include vehicles that were repaired under Transport Canada Recall 2016-043. Safety risk: A loss of power steering assist may result in a sudden increase in steering effort, especially at low vehicle speeds. This could increase the risk of a crash. Corrective Actions: General Motors will notify owners by mail and instruct you to take your truck to a dealer to replace the steering gear torque sensor cover assembly.
Certain vehicles may experience a sudden loss of electric power steering assist due to a poor electrical connection within the torque-sensor harness connector. Steering control can be maintained, as the vehicle will revert to a manual steering mode, but will require greater driver effort. The sudden change in steering may increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace steering gear pinion sensor cover assembly. Note: If the power steering assist is lost, a message is displayed on the Driver Information Centre and a chime sounds to inform the driver.
On certain vehicles, the front brake calipers could leak brake fluid. This could cause longer brake pedal travel and increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and if necessary replace the front brake calipers.
Certain vehicles may fail to comply with the requirements of Canada Motor Vehicle Safety Standard 207 – Anchorage of Seats. Certain seat-frame attachment hooks that secure the front driver and/or front passenger's seat may not have been properly attached to the vehicle body during the assembly process. If this condition were present, the seat could fail to meet the requirements of the standard. This could increase the risk of injury in a crash. Correction: Dealers will inspect seats for proper installation, and if required, disassemble and properly reassemble the seats.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the front driver airbag inflator may separate from the airbag-module backplate during a deployment due to a misalignment during assembly. In a crash, this may cause airbag components to separate from the steering wheel, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. Failure of the driver airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will remove the driver airbag module and inspect the inflator to module housing backplate for proper alignment. The airbag will be replaced if it is found to be misaligned.
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection. During the manufacturing process, the driver's airbag connection may have been wired incorrectly. This would affect the vehicles' two-stage airbag system by reversing the deployment sequence and disrupting the deployment timing of the driver airbag stages. This could result in the driver airbags to not function as designed, which could increase the potential for injury to the seat occupant in a crash. Correction: Dealers are to reprogram the inflatable restraint sensing and diagnostic module (SDM).