Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2015 Toyota Sienna, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Braun Corporation (Braun) is recalling certain 2014-2019 Toyota Sienna mobility van conversions. The brake lines may have incorrect tube nut fittings installed, which may cause a pressure drop within the braking system. Remedy: Braun has notified owners, and dealers will install an adaptor to correct the issue, free of charge. The recall began June 25, 2019. Owners may contact Braun customer service at 1-800-488-0359.
Vantage Mobility International, LLC (Vantage) is recalling certain 2012-2018 AMS Genesis wheelchair vans, built on a Toyota Sienna vehicles. The rubber brake hoses that attach to the rear wheel assembly may be too short, causing them to rub against the rear axle trailing arm. Remedy: Vantage will notify owners, and dealers will install a set of rear brake hoses that will provide the proper clearance, free of charge. The recall began December 16, 2019. Owners may contact Vantage customer service at 1-800-488-9082.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011-2016 Toyota Sienna minivans manufactured January 4, 2010, to August 12, 2016. If the power sliding door is unable to be opened when commanded, such as if the door is frozen shut, the door may subsequently open unexpectedly, possibly while the vehicle is moving. Remedy: Toyota will notify owners, and dealers will replace the junction block, rear sliding door wire harnesses, and install two sub wire harnesses, free of charge. The recall began on July 28, 2017. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is G04.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2015 Sienna vehicles manufactured September 2, 2014, to November 25, 2014. In the event of a crash that necessitates the deployment of the curtain shield airbag (CSA), the second row overhead assist grips may detach. Remedy: Toyota will notify owners, and dealers will modify the headliner near the second row overhead assist grip, free of charge. The recall began on January 15, 2015. Owners may contact Toyota customer service at 1-800-331-4331.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2015 Sienna vehicles manufactured September 1, 2014, to April 13, 2015 and equipped with overhead entertainment accessories installed by SET. During reassembly of the interior after the overhead entertainment system installation, a trim panel securing clip may have been reused instead of being replaced. Remedy: SET will notify owners, and dealers will replace the trim panel securing clip, free of charge. The recall began on May 22, 2015. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET15B.
Gulf States Toyota, Inc. (GST) is recalling certain model year 2015 Toyota Sienna vehicles manufactured January 23, 2015, to April 13, 2015, and equipped with non-Toyota-brand overhead entertainment accessories installed by GST. During reassembly of the interior after the overhead entertainment system installation, a trim panel securing clip may have been reused instead of being replaced. Remedy: GST will notify owners, and dealers will replace the trim panel securing clip, free of charge. The recall began June 5, 2015. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 15R1.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Issue: On certain vans converted to a rear-entry mobility vehicle by BraunAbility, the fittings for the brake line extensions may be incorrect. This could cause a brake fluid leak that may result in reducing braking. Note: This problem affects conversions that were built between January 9, 2018, and May 20, 2019. Safety Risk: Reduced braking could cause extended stopping distances and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a BraunAbility dealer to inspect the brake line connections. If necessary, an adapter fitting will be installed and the brake system will be bled.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles equipped with power sliding doors, under certain conditions which impede the opening of the door (such as if the door becomes frozen with ice), the sliding door motor could stall when the door is operated. If the motor stalls, high current in the door motor circuit could be generated, operating the circuit protection for the door motor. If this occurs with the sliding door latch mechanism in an unlatched position, the door could open while driving, increasing the risk of injury to a vehicle occupant. Correction: Dealers will replace the existing junction block and the rear sliding door wire harnesses with newly designed ones. The dealer will also install two sub wire harnesses to connect the junction block to the two rear door wire harnesses.
On certain vehicles, in the event of a collision that warrants a deployment of the curtain shield airbag (CSA), the force transmitted to the headliner as the airbag inflates may cause the left and/or right side second row overhead assist grip to detach from its mounting brackets if the temperature in the roof rail area is high from outside ambient temperature. If an assist grip were to completely detach, it could contact an occupant, which would increase the risk of injury in the event of a crash. Correction: Dealers will modify the headliner near the second row overhead assist grips.