Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2016 Chevrolet Malibu, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
General Motors LLC (GM) is recalling certain 2016-2018 Chevrolet Malibu vehicles. During servicing, a Passenger Presence System (PPS) may have been installed that was not correctly calibrated to the vehicle's seat type. As a result, the PPS may not properly identify an adult passenger from a child passenger in the front passenger seat, potentially causing the air bag to not deploy when it should, or causing the air bag to deploy when it shouldn't. Remedy: GM will notify owners, and dealers will replace the front passenger PPS seat service kit, free of charge. The recall began August 7, 2018. Owners may contact Chevrolet customer service at 1-800-222-1020. GM's number for this recall is 18208.
General Motors LLC (GM) is recalling certain 2015-2018 GMC Canyon, 2016-2017 Buick Envision, 2016-2018 Chevrolet Colorado and Malibu, 2017-2018 GMC Acadia, 2018 Buick LaCrosse, Cadillac ATS, Chevrolet Equinox, and GMC Terrain vehicles. The high pressure fuel pump may detach from its mounting flange, possibly resulting in the pump damaging the high pressure fuel line. Remedy: GM will notify owners, and dealers will replace the high pressure fuel pump, and high pressure fuel pipe, free of charge. The recall began July 2, 2018. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 18188.
General Motors LLC (GM) is recalling certain model year 2016 Chevrolet Malibu vehicles manufactured March 7, 2016, through March 12, 2016. The memory chip in the electronic brake control module (EBCM) may fail and cause the loss of electronically controlled brake systems including anti-lock brakes (ABS) and electronic stability control (ESC). As such, these vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control Systems." Remedy: GM will notify owners, and dealers will install a replacement EBCM, free of charge. The recall began on June 17, 2016. Owners may contact Chevrolet customer service at 1-800-222-1020). GM's number for this recall is 39440.
General Motors LLC (GM) is recalling certain model year 2016 Chevrolet Malibu vehicles manufactured November 18, 2015, to June 7, 2016. The fabric of the side-impact air bag cushion may tear during deployment. Remedy: GM will notify owners, and dealers will inspect and, as necessary, replace the air bag module, free of charge. The recall began October 27, 2016. Owners may contact Chevrolet customer service at 1-800-222-1020. GM's number for this recall is 16079.
General Motors LLC (GM) is recalling certain model year 2016-2017 Buick Verano and 2016 Chevrolet Malibu as the electronic park lock lever may allow the ignition key to be removed without the transmission being in PARK. Also, certain 2013 Buick Encore, 2011 Buick Regal, 2013-2014 Buick Verano, 2011-2016 Chevrolet Cruze, 2010-2013 Chevrolet Equinox 2013-2015 Chevrolet Malibu, and 2011-2013 GMC Terrain vehicles may have been serviced with similar defective replacement electronic park lock levers. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 114, "Theft Protection and Rollaway Prevention." Remedy: GM will notify owners, and dealers will inspect and if necessary replace the key cylinder lock housing, free of charge. The recall began on October 14, 2016. Owners may contact Chevrolet customer service at 1-800-222-1020, Buick 1-800-521-7300, and GMC 1-800-462-8782. GM's number for this recall is 50490 and 50491.
Genera Motors LLC (GM) is recalling certain model year 2016 Chevrolet Camaro, Malibu, Silverado and GMC Sierra vehicles. The radio may intermittently fail to provide an audio warning when the key has been left in the ignition and the door is opened or when the driver does not fasten their seat belt. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standards (FMVSS) number 114, "Theft Protection", and/or 208, "Occupant Crash Protection." Remedy: GM will notify owners, and dealers will update the radio software, free of charge. The recall began on March 14, 2016. Owners may contact Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 15808.
General Motors LLC (GM) is recalling certain 2016 Malibu vehicles manufactured February 16, 2016, to March 5, 2016. The two weld studs that mount the front and rear side impact air bags may fracture and separate from the air bag during deployment. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) No. 214, "Side Impact Protection." Remedy: GM will notify owners, and dealers will replace the side air bag modules, free of charge. The recall began on April 14, 2016. Owners may contact Chevrolet customer service at 1-800-222-1020. GM's number for this recall is 31820.
General Motors LLC (GM) is recalling certain model year 2016 Chevrolet Colorado vehicles manufactured January 19, 2016, to February 2, 2016, Chevrolet Malibu vehicles manufactured January 9, 2016, to January 26, 2016, and 2016 GMC Canyon vehicles manufactured January 21, 2016, to February 4, 2016. The driver frontal air bag may improperly inflate during second-stage deployment in the event of a high speed crash. Remedy: GM will notify owners, and dealers will replace the driver side frontal air bag module, free of charge. The recall began on April 14, 2016. Owners may contact Chevrolet customer service at 1-800-222-1020, and GMC customer service at 1-800-462-8782. GM's number for this recall is 28030.
General Motors, LLC (GM) is recalling certain 2016-2021 Chevrolet Malibu and 2019-2021 Cadillac XT4 vehicles. The rear seat belt retractors may be improperly secured with loose or missing fasteners. Remedy: Dealers will inspect and tighten the rear seat belt retractors, as necessary, free of charge. Owner notification letters were mailed on September 17, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020 and Cadillac customer service at 1-800-458-8006. GM's number for this recall is N212333380.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain vehicles, a bolt that attaches the rear seat belt retractor(s) may be missing. As a result, the seat belt may not work as designed in a crash. Note: On Chevrolet Malibu models, the right rear seat belt could be affected. On Cadillac XT4 models, both the left and right rear seat belts could be affected. Safety Risk: A seat belt that does not work properly could increase the risk of injury in a crash. Corrective Actions: General Motors will notify owners by mail and instruct you to take your vehicle to check that the rear seat belt retractor bolts are properly installed. The dealer will replace or tighten the bolt(s), as required.
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
On certain vehicles that had the front passenger presence system (PPS) replaced, the replacement parts may have been incorrectly calibrated. This could cause the PPS not to properly identify certain children and small adults seated in the front passenger seat. If the vehicle was involved in a crash, this could cause the airbag to deploy when it should not, or could cause the airbag not to deploy when it should. Either of these outcomes could increase the risk of injury to the seat occupant. Correction: Dealers will replace the front PPS.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
On certain hybrid vehicles, the manual service disconnect (MSD) may not have been properly installed and may not be locked in position. This could cause the MSD to become loose and disconnect while driving, which could cut off all high-voltage power to the vehicle. The loss of high-voltage power could cause the vehicle to stall without warning, which would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and seat the MSD connector properly. The dealer will also install an updated calibration to monitor if the high voltage interlock loop is incomplete.
Certain vehicles may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 114 - Theft Protection and Rollaway Prevention. The Electronic Park Lock (EPL) lever in the steering column electrical assembly may have been damaged during manufacturing. As a result, the ignition key could be removed when the vehicle’s transmission is in a position other than park. This could cause unintended vehicle movement, increasing the risk of injury and/or property damage. Correction: Dealers will inspect the vehicle and, if necessary, replace the key cylinder lock housing.
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 126 - Electronic Stability Control Systems. The memory chip in the electronic brake control module (EBCM) may fail and cause the loss of electronically controlled brake systems, including anti-lock brakes (ABS) and electronic stability control (ESC). As a result, the vehicle could be more difficult to control in situations where these brake systems would normally be engaged, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will install a replacement EBCM. Note: This condition does not affect the primary braking system; the service brakes will operate normally.
Certain vehicles may not comply with the side impact protection requirements of United States Federal Motor Vehicle Safety Standard 214, which is voluntarily-adopted in Canada. The two weld studs that mount the front and rear side impact airbag (“SIAB”) inflators to the seat frame may fracture and separate during airbag deployment. If the vehicle is involved in a crash that warrants side airbag deployment, and both weld studs were to fracture, the inflated cushion may not remain in its intended position and may separate from the seat, increasing the risk of injury to vehicle occupants. Correction: Dealers will inspect and replace the affected side airbag modules as necessary, which may include any combination of left, right, front, and/or rear side airbag modules.
On certain vehicles, the second stage of the driver frontal airbag may not deploy properly in certain high speed crashes. If the vehicle were to be involved in a high speed crash that triggers the second-stage deployment of the driver frontal airbag, the second stage of the inflator may not fill the airbag as completely and as quickly as designed, which could increase the risk of injury to the driver. Correction: Dealers will replace the driver frontal airbag module.