Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2016 Kia Soul, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Kia Motors America (Kia) is recalling certain 2012-2016 Kia Soul vehicles equipped with 1.6L Gasoline Direct Injection (GDI) engines. High exhaust gas temperatures may damage the catalytic converter, possibly resulting in abnormal engine combustion and damage to one or more of the engine's pistons and possible piston connecting rod failure. Remedy: Kia will notify owners, and dealers will upgrade the Catalytic Overheating Protection Engine Control Unit logic to prevent overheating of the catalytic converter. In addition, the catalytic converter will also be replaced if it has been damaged. Depending on the extent of any damage, the engine may also be replaced, free of charge. The recall began April 17, 2019. Owners may contact Kia customer service at 1-800-333-4542. Kia's number for this recall is SC176.
Kia Motors America (Kia) is recalling certain 2014-2016 Soul and Soul EV vehicles. The pinion plug may allow the pinion gear to separate from the steering gear assembly. Remedy: Kia will notify owners, and dealers will inspect and secure the pinion plug or replace the steering gear assembly, as necessary, free of charge. The recall began November 16, 2017. Owners may contact Kia customer service at 1-800-333-4542. Kia's number for this recall is SC155. Note: This recall supersedes campaigns 14V-332 and 15V-736. Vehicles previously remedied under those numbers are being recalled again under this campaign.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: Over time, the brake lines under the vehicle could corrode. If this happens, a brake line could fail and leak. A brake fluid leak can result in reduced braking. Safety Risk: Reduced braking can cause extended stopping distances and increase the risk of a crash. Corrective Actions: Kia will notify owners by mail and advise you to take your vehicle to a dealership to inspect the brake lines. The dealer will apply an anti-corrosion treatment and replace the brake lines, if required.
Issue: On certain vehicles, the compliance label may be missing information in French. The words listed on the label for "Tires", "Rims", "Front" and "Rear" appear in English only, when they should be listed as "Tires/Pneus", "Rims/Jantes", "Front/Avant" and "Rear/Arriere". Canadian regulations require this information to be listed on the label in both English and French. Safety Risk: These small errors do not affect vehicle safety. Corrective Actions: This is not a recall. Kia has corrected the compliance label for all new vehicles.
Issue: On certain vehicles, the wiring for the heated seat could disconnect and cause the seat heaters to overheat. Safety Risk: A seat heater that overheats could create the risk of a burn injury. Corrective Actions: Kia will notify owners by mail and advise you to take your vehicle to a dealership to replace the seat heater electronic control unit. The dealer will also replace the seat heater pad(s), as necessary.
Issue: Kia Canada is conducting a Product Improvement Campaign that provides an update to the engine control module to detect potential problems before an engine fails. An engine failure could cause a sudden loss of power with an inability to restart. Note: This campaign only affects vehicles equipped with a 1.6 L GDI engine. Safety Risk: A sudden loss of engine power could increase the risk of a crash. An engine failure could also create the risk of a fire. Corrective Actions: Kia will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to update the software for the engine control module. Note: Kia recommends that you should always follow the correct vehicle maintenance schedule, which is printed in the Owner's Manual. If you experience unusual engine noise, reduced power, or a check engine/oil warning light, Kia advises you to immediately visit a Kia dealership to have your vehicle diagnosed.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
The battery management system (BMS) might not detect an abnormal voltage in the battery cells before an electrical short circuit occurs. This could lead to an increased risk of fire. Production: 4.6.2014 - 12.11.2018. Types: PSEV; e9*2007/46*6160*.
When the vehicle is charging and the parking brake is not manually engaged, unintended vehicle movement may occur even though the gear shift lever is in park position, increasing the risk of accident and injury. Production: 26/11/2013 - 14/11/2018. Types: e9*2007/46*6160.
In the event of a collision the two frontal impact sensors may separate. This can affect the deployment of the airbag, increasing the risk of injury. Production: 21.07.2013 - 01.06.2015. Types: PS; e4*2007/46*0825*.
Frontal collision sensors (left and right) could disengage in the event of a collision. This can affect the deployment of the airbags, increasing the risk of injuries in the event of an accident. Production: KIA Soul (PS): 16.05.2016 - 31.12.2018; KIA Soul EV (PS EV): 20.03.2017 - 14.11.2018. Types: 221004: e9*2018/858*11073*00; 221040: e4*2007/46*0825*01.
The "Malfunction Indicator Lamp" could be switched on incorrectly. That can impair the braking performance of the vehicle, increasing the risk an accident. Production dates not stated in the alert. Types: e4*2007/46*1365.
How cars of this model and year did at Norway's periodic inspection, across a full year of tests.
Source: Statens vegvesen, periodic inspections (EU-kontroll) · CC BY 4.0
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: Kia Canada is conducting a Product Improvement Campaign that provides an update to the engine control module to detect potential problems before an engine fails. An engine failure may cause a sudden loss of power with an inability to restart. Note: This campaign affects vehicles with a 2.0 L GDI engine. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: Kia will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to update the software for the engine control module.
Issue: On certain vehicles, the catalytic converter may be damaged by overheating. This could also cause engine damage or an engine failure. An engine failure would cause a sudden loss of power with an inability to restart. Safety Risk: A sudden loss of engine power could increase the risk of a crash. An engine failure may also result in a fire. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the engine software updated. This update will prevent overheating of the catalytic converter. Vehicles will also be inspected for other damage. Depending on the results of the inspection, the catalytic converter and/or the engine may be replaced. Note: A driver may notice any of the following symptoms of this problem: a knocking sound from the engine, reduced power or hesitation, and/or the illumination of the Malfunction Indicator Lamp (MIL) or check engine light.
On certain vehicles previously repaired under recalls 2014-237 or 2015-535, the pinion plug may not have been secured properly. As a result, the pinion gear may separate from the steering gear assembly causing a loss of steering which could result in a crash causing injury and/or damage to property. Correction: Dealers will inspect the pinion plug to ensure that the recall repair, if previously conducted, was properly done. Based on the inspection results, the recall repairs will either be redone with an improved method or, if necessary, the steering assembly will be replaced. Note: This recall supersedes recalls 2014-237 and 2015-535. Vehicles repaired under the previous recall(s) will require re-inspection and possible repair.
On certain vehicles, insufficient adhesive may have been applied to the steering gear pinion plug at time of assembly. This could allow the plug to loosen and potentially separate from the steering gear assembly, causing a loss of steering which could result in a crash causing injury and/or damage to property. Correction: Dealers will install a new pinion plug with properly applied adhesive. Note: This recall is superseded by recall 2017514. Please see recall 2017514 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2017514">Click here for more information</a>.