Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2017 Forest River XLR Toyhauler, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Forest River, Inc. (Forest River) is recalling certain 2016-2017 XLR ToyHauler recreational trailers, models XLT23KW and WZXLT23KW. These vehicles were built with axle equalizers that are too long. Remedy: Forest River will notify owners, and dealers will install the correct equalizers, free of charge. The recall began on June 28, 2017. Owners may contact Forest River customer service at 1-574-642-0432. Forest River's number for this recall is 45-05312017-0415.
Forest River, Inc. (Forest River) is recalling certain model year 2017 XLR recreational trailers, models XLF413AMP, XLF422AMP, WZXLF422AMP and XLF380AMP, manufactured September 29, 2016, to November 8, 2016. The affected vehicles may be equipped with an incorrect Federal Placard that does not indicate that the vehicle has a third axle. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification." Remedy: Forest River will notify owners, and dealers will install a corrected Federal Placard, free of charge. The recall began on December 1, 2016. Owners may contact Forest River customer service at 1-574-642-0432. Forest River's number for this recall is 45-11122016-0272.
Forest River, Inc. (Forest River) is recalling certain 2016-2018 Forest River XLR Toyhauler recreational trailers, models XLT25KW, XLT25KW-W, XLT28KW and XLT28KW-W. The safety chains on these vehicles do not exceed the Gross Vehicle Weight Rating (GVWR) of the trailer. Remedy: Forest River will notify owners, and dealers will replace the safety chains with chains that exceed the vehicle's GVWR, free of charge. The recall began on March 13, 2018. Owners may contact Forest River customer service at 1-574-642-0432. Forest River's number for this recall is 45-0645.
Forest River, Inc. (Forest River) is recalling certain model year 2017 XLR Toyhauler and Prime Time Spartan recreational fifth-wheel vehicles manufactured August 21, 2016, to December 12, 2016. The affected vehicles have rear cargo door hinges with welds on the hinge pin and hinge plate that may be insufficient, and as a result, the top of the door may swing down with more force than normal. Remedy: Forest River will notify owners, and dealers will replace the ramp door hinge, free of charge. The recall began on February 22, 2017. For more information, XLR owners may call 1-574-642-0432 and Spartan owners may call 1-574-862-1025. Forest River's number for this recall is 51-12312016-0310.
Forest River, Inc. (Forest River) is recalling certain 2017 XLR ToyHauler trailers, model XLT26HFS. The Federal Placard incorrectly states that the rear tire pressure should be 50psi, when the tires should actually be inflated to 80psi. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims." Remedy: Forest River will notify owners, and dealers will install a corrected Federal Placard, free of charge. The recall began on May 31, 2017. Owners may contact Forest River customer service at 1-574-642-0432. Forest River's number for this recall is 45-05032017-0398.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain travel trailers, the laminated plastic touch pad on the top of the power tongue jack may crack and/or separate. This could result in water entering the internal circuitry of the touch pad, potentially causing unintended extension or retraction of the power tongue jack. If this were to occur while the vehicle was in motion, it could result in loss of control and increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the "Smart Jack" power tongue jack assembly with an updated version with improved water protection.
On certain travel trailers, an incorrectly sized equalizer was mounted to the center axle hanger. This could lead to premature failure of the equalizer and/or axle springs which could result in loss of vehicle control increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will remove the incorrect equalizer and replace it with the correct equalizer.
On certain travel trailers, the side patio deck bar lock may have been manufactured with incorrect fasteners. If the fasteners were to fail, the patio would drop down without warning while the vehicle is parked or in transit. If this occurs, it could cause injury to bystanders or increase the risk of crash causing injury and/or damage to property. Correction: Dealers will replace the fasteners.
On certain travel trailers, the hinge assemblies of the rear cargo door may have been manufactured incorrectly. The weld on the hinge assembly had been ground down during manufacturing to ensure clearance when installed on a door. The grinding of the weld weakened the joint and, as a result, if the door were to be opened and the hinge assembly were to fail, the door could come down with more force than normal, increasing the risk of injury to a person standing nearby. Correction: Dealers will inspect the hinge assembly and replace as necessary.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain travel trailers manufactured with a Christianson Industries exterior foldable ladder, the ladder's mounting bracket could separate from the hinge due to an incorrect weld. This could result in the ladder separating from the vehicle, which if an individual were to be utilizing the ladder, it could lead to an increased risk of injury and/or damage to property. Correction: Dealers will install a hinge brace over the back of the existing hinges to secure the hinge and mounting bracket.