Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2017 Freightliner Cascadia, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts. Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner Cascadia, Coronado and 122SD, and Western Star 4900 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted. Remedy: Dealers will replace the affected nylon fuel line with a steel fuel line, free of charge. The recall began November 21, 2018. Owners may contact DTNA customer service at 1-800-547-0712 or Cummins customer service at 1-800-286-6467. DTNA's number for this recall is FL789.
Daimler Trucks North America LLC (DTNA) is recalling certain 2004-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Classic, FL80, FLD 120SD, Business Class M2, Western Star 4700, 4900, 6900, Sterling Acterra, L7500, LT7500, L8500, LT8500, L9500, and LT9500 vehicles. The vehicles may have an insufficient service brake air reservoir capacity. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems." Remedy: DTNA will notify owners, and dealers will add air reservoir capacity to the affected vehicles. Owner letters were mailed on November 29, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-815.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Freightliner Cascadia tractor trailers. The single brake modulator valve may be affected by chemical corrosion which can slow down the release timing and cause the brakes to pull to the affected side during automatic braking events. Remedy: DTNA will notify owners, and dealers will replace the front left and right single brake modulator valves will be replaced and spacers added, free of charge. The recall began August 28, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-855.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2019 Freightliner Cascadia trucks. The Instrument Cluster Unit (ICU) may not perform the required bulb checks for the Anti-lock Brake System (ABS) or Electronic Stability Control (ESC) if the ignition is turned from on to off to on too quickly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control Systems on Heavy Vehicles." Remedy: DTNA will notify owners, and dealers will reprogram the ICU's to ensure a bulb check is performed each time the ignition is turned on, free of charge. Also, the sub-population with Tire Pressure Monitoring (TMPS) will also require replacement parts, free of charge. DTNA issued owners an interim notification on September 18, 2018. The recall began March 5, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-780.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner M2 Business Class, 108SD, 114SD and Cascadia trucks, Western Star 4700, 4900, and 5700 trucks, FCCC S2C 106 Cab, S2G Cab, XBR, XBS, XCL, XCM, XCP, XCR, and XCS chassis equipped with air disc brakes. The brake caliper mounting bolts on these vehicles may be insufficiently tightened, allowing the bolts to loosen. Remedy: DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts and tighten them as necessary, free of charge. DTNA issued owners an interim notification on July 25, 2018. The recall began September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-772.
Daimler Trucks North America (DTNA) is recalling certain 2017-2018 Freightliner Cascadia vehicles. The brakes lights on these vehicles may remain activated after the brake pedal is released. Remedy: DTNA will notify owners and dealers will replace the brake light switch. The recall began January 18, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-799.
Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Cascadia P4 vehicles. The brake lights may remain illuminated after the brake pedal has been released. Remedy: DTNA will notify owners, and dealers will replace the 3-pin brake pressure switch with a 2-pin brake pressure switch along with a jumper harness, free of charge. DTNA issued owners an interim notification on November 17, 2020. Owner notification letters were mailed on November 21, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-863.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2022 Freightliner Cascadia vehicles equipped with halogen headlight assemblies. The halogen headlight bulb may dislodge during replacement and contact other vehicle components, possibly causing them to melt. Remedy: Dealers will install a foam grommet, cut a 4-inch access hole into the inner fender, and add a warning label on both fenders, free of charge. Owner notification letters were mailed on July 9, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-887.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2018 Freightliner Cascadia vehicles. The upper steering pinch bolt may not have been properly tightened, possibly causing a loss of mechanical connection between the steering wheel and front wheels. Remedy: DTNA will notify owners, and dealers will verify that the upper steering shaft pinch bolt is properly tightened, free of charge. The recall began on October 26, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-748. Note: Owners are advised not to drive their vehicles until they have been checked.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2017 Freightliner Cascadia, 122SD, Western Star 4900SA and 4900FA, and FCCC XCM and XCP trucks manufactured from March 14, 2016, through May 18, 2016, equipped with a Cummins ISX12 or ISX15 engine using certain engine control modules (ECM). These ECM's may experience an internal electrical short that can cause a fuse to blow, resulting in an unexpected engine stall without the ability to restart the engine. Remedy: Cummins will notify owners, and Cummins dealers will install a new ECM, and correct ECM calibrations, free of charge. The recall began on July 8, 2016. Owners may contact DTNA customer service at 1-800-547-0712, or Cummins customer service at 1-800-343-7357. DTNA's number for this recall is FL-715.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2017 Freightliner M2 Business Class, 108 SD, 114 SD, Cascadia, Coronado, Western Star 4700, 4800, and 5700 XE trucks manufactured March 15, 2013, to July 29, 2016 and equipped with Conmet aluminum non-high capacity hubs. These vehicles specify a front axle weight limit that may be greater than that of the hub capacity. As a result, the hub may fail and the wheel may separate from the axle. Remedy: DTNA will notify owners, and dealers will replace the front axle hubs, free of charge. The recall began during November 2016. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-718.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017 Freightliner Cascadia and Western Star 5700 trucks built with NFD tandem rear axles. During the hardening process, the axle assembly output shaft may have been made brittle, possibly resulting in the output shaft fracturing while the vehicle is in use. Remedy: DTNA will notify the owners, and Detroit Axle dealers will replace the output shaft, free of charge. The recall began on July 7, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-738.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2017 Freightliner Cascadia, Business Class M2, and 122SD trucks manufactured January 24, 2016, to October 10, 2016 and equipped with Goodyear G399A LHS 295/75R22.5 Load Range G tires. The tires on the affected vehicles may have cured improperly, possibly resulting in a partial tread separation. Remedy: Goodyear will notify the owners of the affected Freightliner vehicles and Goodyear dealers will replace the affected tires, free of charge. The recall began on December 14, 2016. To find a Goodyear dealer, owners should contact Goodyear Consumer Relations at 1-800-592-3267. Consumers may also contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-728.
Daimler Trucks North America, LLC. (DTNA) is recalling certain model year 2013-2017 Freightliner Cascadia vehicles manufactured September 24, 2012, to May 27, 2015 and equipped with compressed natural gas (CNG) engines. The affected vehicles have a Power Distribution Module (PDM) that is mounted near the CNG fuel tank. Due to its location, the PDM may be sprayed with water and contaminants from the road, possibly causing the PDM to short circuit. Remedy: DTNA will notify owners, and dealers will relocate the PDM, free of charge. An interim notice was mailed to owners on November 7, 2016. The recall began on March 3, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-721.
Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf Remedy: DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal. Remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during an Adaptive Cruise Control (ACC) braking event. Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 16, 2023. DTNA's number for this recall is FL-958. This recall expands and replaces previous recall 20V-390. All vehicles previously repaired under recall 20V-390 will need to have the new remedy performed.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC). Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 13, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL966.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks, the brake modulator valves could corrode. As a result, the brakes on one wheel could fully apply when the roll stability control system activates. If this happens, there could be a brake pull that can cause the truck to change direction. Note: This problem does not affect the service brakes. Safety Risk: A brake pull that causes the vehicle to change direction suddenly can increase the risk of crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect, and if necessary, replace the brake modulator valves.
Issue: On certain trucks, the brake modulator valves could corrode. As a result, the brakes on one wheel could fully apply during an adaptive cruise control braking event. If this happens, there could be a brake pull that can cause the truck to change direction. Note: This problem does not affect the regular service brakes. Safety Risk: A brake pull that causes the vehicle to change direction suddenly can increase the risk of crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect, and if necessary, replace the brake modulator valves.
Issue: On certain trucks, if the headlamp bulb is replaced and not properly installed, it could move and contact other parts inside the headlamp. Safety Risk: A headlight bulb that touches other parts could cause the headlamp to melt or catch fire. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to modify the headlamp assembly and inner fender to assist with headlamp bulb replacement. A warning label/sticker will also be installed.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain trucks, the brake lights may stay on after the brake pedal is released. Safety Risk: Brake lights that stay on could cause other road users not to recognize when the truck is braking. This could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the 3-pin brake pressure switch with a 2-pin switch. A jumper harness will also be added. For vehicles equipped with a Cummins engine, the final repair has not yet been finalized. As an interim repair, the 3-pin brake pressure switch will be replaced with a new 3-pin brake pressure switch. A follow up notice will be sent to those owners when the final repair is available.
Issue: On certain trucks, the brake modulator valves could corrode. As a result, the brakes on one side of the vehicle may be slow to release after an automatic braking event. If this happens, there could be a brake pull that can cause the truck to change direction. Note: This problem does not affect the regular service brakes. Safety Risk: A brake pull that causes the vehicle to change direction suddenly can increase the risk of crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the brake modulator valve.
Issue: On certain trucks equipped with "Fleet Engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck. Safety Risk: Reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash. Corrective Actions: Daimler Trucks of North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.
On certain vehicles, the brake lights may remain on after releasing the brake pedal. If the brake lights stay on constantly, a following driver may not be alerted that the vehicle ahead is braking, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America Authorized Service Facilities will replace the brake pressure switch.
On certain trucks built with a Cummins X15 or ISX15 engine equipped with nylon fuel lines and a banjo bolt on the fuel pump, a blockage in the fuel cooling system may cause a fuel line to burst. This could result in a significant fuel leak onto the roadway, which would create a road hazard for other motorists. Additionally, this condition could also cause an engine stall without warning, without the ability to restart the engine. Both of these conditions may increase the risk of a crash causing injury and/or damage to property. Correction: Cummins-authorized dealers will replace the affected nylon line with a steel line.
Certain vehicles may fail to conform to the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 121 - Air Brake Systems and CMVSS 136 - Electronic Stability Control Systems for Heavy Vehicles. When the ignition is cycled off and then on within a few seconds, the Instrument Control Unit (ICU) may not perform the indicator lamp check as required by the standards. This could potentially confuse an inspector who may believe that the ABS or ESC is not functioning correctly should the ignition be cycled too quickly from on-to-off-to-on during a vehicle inspection. Correction: Daimler Trucks of North America Service Facilities will reprogram the ICU. For vehicles with a Tire Pressure Monitoring System, the Electronic Control Unit will also be replaced.
On certain vehicles with air brakes, after several hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal. If the brake lights do not illuminate, following road users would be unaware of the intent of the driver to slow the vehicle, which could increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will repair the brake light pressure switch.
On certain vehicles, the pinch bolt of the upper steering shaft may not have been tightened to the proper specification. This could lead to a loss of the mechanical connection between the steering wheel and front axle wheels, resulting in a loss of steering control, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will inspect and ensure proper torque of the upper steering shaft pinch bolt. Note: In the interim, owners are advised to stop driving their vehicles until they have been inspected.
On certain vehicles built with NFD tandem rear axles, due to a manufacturing issue, the output shaft hardening may be too deep at the bolt hole for the yoke, causing the area to be brittle. The brittle condition may lead to fracture of the output shaft, which if the fracture were to happen suddenly at highway speed while descending a grade, the compression brake would be rendered ineffective and the shaft may become a road hazard, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the through shaft.
Certain vehicles equipped with Goodyear G399A LHS LR G tires on the front steering axles, the tires may not have been cured properly during the manufacturing process. This could cause the tires to have incomplete adhesion, which could lead to partial tread separation and/or tire failure. If the tread were to separate while a vehicle is in motion, it could cause a loss of vehicle control, which would increase the risk of a crash causing injury and/or damage to property. Correction: Goodyear dealers will inspect and replace the tires as necessary.
On certain vehicles, the specified front axle weight limit may be greater than the hub capacity. If the axle load exceeds the maximum weight capacity of the hub, there is an increased risk of hub fatigue, which could cause a complete separation of the wheel(s) and a loss of vehicle control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the incorrectly specified front axle hubs.
On certain vehicles, the Engine Control Module (ECM) may develop an internal electrical short circuit that could blow a fuse in the ECM's electrical supply circuit. This could cause the engine to stall without warning and prevent the vehicle from being restarted. Engine stalling without warning would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the ECM.