Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2017 International Lonestar, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Navistar, Inc. (Navistar) is recalling certain 2017-2018 International ProStar and 9900i trucks, 2018-2019 International LT trucks, 2017-2019 International LoneStar and HX trucks and 2017 International PayStar trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted. Remedy: Cummins will notify the affected owners and dealers will replace the nylon fuel line with a steel fuel line, free of charge. Navistar issued owners an interim notification on October 11, 2018. The recall began November 21, 2018. Owners may contact Navistar customer service at 1-800-448-7825, or Cummins customer service at 1-800-286-6467.
Navistar, Inc. (Navistar) is recalling certain 2017 International ProStar, LoneStar, 9900i, and TranStar trucks. The affected vehicles have a metallic battery cover latch that may unlatch and contact the battery jump start stud, causing an electrical short to ground if the jump start stud is not covered. Remedy: Navistar will notify owners, and dealers will install a latch stop to prevent the latch from rotating to the unlatched position, free of charge. The recall began on January 27, 2017. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 16513.
Navistar Inc. (Navistar) is recalling certain 2016-2018 International LT, 2016-2017 International ProStar, 2017-2018 International LoneStar and International RH heavy diesel trucks. The air dryer mounting bracket may fracture, causing air system leaks or a loss of air pressure to the brake system. Remedy: Navistar will notify owners, and dealers will replace the air dryer mounting bracket, free of charge. The recall began on May 12, 2017. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for the recall is 17502.
Navistar, Inc. (Navistar) is recalling certain model year 2017 International ProStar, LoneStar, PayStar, HX, and 9900 trucks equipped with a Cummins ISX15L engine using certain engine control modules (ECM). These ECM's may experience an internal electrical short that can cause a fuse to blow, resulting in an unexpected engine stall without the ability to restart the engine. Remedy: Cummins will notify owners, and Cummins dealers will replace the ECM, free of charge. The recall began on July 8, 2016. Owners may contact Cummins customer service at 1-800-343-7357 or Navistar customer service at 1-331-332-1590.
Navistar, Inc. (Navistar) is recalling certain 2016-2017 International TranStar, 2017-2019 International ProStar, International LoneStar, 2017-2020 International DuraStar, WorkStar, and 2018-2019 IC Bus HC Commercial buses. The heating, ventilation, and air-conditioning (HVAC) blower motor circuit may have an insufficient wiring terminal that can overheat. Remedy: Dealers will replace the HVAC blower motor load circuit wiring terminal, free of charge. Owner notification letters are expected to be mailed June 5, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23510.
International Motors, LLC (International) is recalling certain 2016 7600, 2016-2023 Lonestar, 2018 8600, 2018-2023 LT, 2021-2026 MV, 2022-2023 RH, 2023-2026 HX, and 2025-2026 HV vehicles. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working. Remedy: International will work with Bendix to reprogram the ECU, free of charge. Owner notification letters were mailed January 19, 2026. Owners may contact International's customer service at 1-800-448-7825. International's number for this recall is 25525. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 12, 2026.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks, the backup lamps could be blocked and may not be visible. As a result, the trucks don't meet the requirements of the Canadian regulations. Note: This recall only affects trucks equipped with a pintle hook lowering bracket and feature code 01WPN, 01 WPS, or 01VAL. Safety Risk: Backup lamps that aren't visible could cause a person not to recognize that the vehicle is backing and increase the risk of a crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealership to install new tail stop/turn signal lamps with integrated backup lamps.
Issue: On certain trucks, a wire terminal for the blower motor circuit breaker in the power distribution module (PDM) could overheat and melt. Safety Risk: Wiring that overheats and melts can create the risk of a fire. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealership to replace the blower motor wiring terminal in the PDM. The dealership will also inspect and, if necessary, replace the fuse block.
On certain trucks built with a Cummins X15 or ISX15 engine equipped with nylon fuel lines and a banjo bolt on the fuel pump, a blockage in the fuel cooling system may cause a fuel line to burst. This could result in a significant fuel leak onto the roadway, which would create a road hazard for other motorists. Additionally, this condition could also cause an engine stall without warning, without the ability to restart the engine. Both of these conditions may increase the risk of a crash causing injury and/or damage to property. Correction: Cummins-authorized dealers will replace the affected nylon line with a steel line.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, the air dryer mounting bracket may fracture and cause the air dryer to separate the frame. This could potentially cause the air lines to separate from the dryer resulting in an air system leak or loss of air pressure to the brake system, which would increase stopping distances and increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the air dryer mounting bracket with an updated heavy duty bracket.
On some vehicles, the metallic battery box cover latch, when unlatched from its anchor, may articulate and potentially contact the battery jump start stud. If the jump start stud's protective cover has fallen off or is not installed, this may result in an electrical short to ground, increasing the risk of a fire causing injury and/or property damage. Correction: Dealers will install a latch stop to prevent the latch from potentially contacting the stud.
On certain vehicles, the Engine Control Module (ECM) may develop an internal electrical short circuit that could blow a fuse in the ECM's electrical supply circuit. This could cause the engine to stall without warning and prevent the vehicle from being restarted. Engine stalling without warning would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the ECM.