Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2017 International Prostar, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Navistar, Inc. (Navistar) is recalling certain 2017-2018 International ProStar and 9900i trucks, 2018-2019 International LT trucks, 2017-2019 International LoneStar and HX trucks and 2017 International PayStar trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted. Remedy: Cummins will notify the affected owners and dealers will replace the nylon fuel line with a steel fuel line, free of charge. Navistar issued owners an interim notification on October 11, 2018. The recall began November 21, 2018. Owners may contact Navistar customer service at 1-800-448-7825, or Cummins customer service at 1-800-286-6467.
Navistar, Inc. (Navistar) is recalling certain 2016-2020 International LT and 2017-2018 Prostar 73-inch sleeper cab models equipped with feature code 07BKP or 07BKR (exhaust system with horizontal after treatment device and horizontal tailpipe mounted on right side). In the affected vehicles, the rear exhaust hanger bracket may crack, which can cause the forward hanger bracket to also crack. If both brackets crack, the exhaust tail pipe may detach from the vehicle. Remedy: Navistar will notify owners, and dealers will replace the rear exhaust hanger bracket and replace any forward bracket found cracked and any exhaust tailpipe found damaged, free of charge. The recall began April 23, 2019. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 19501.
Navistar Inc. (Navistar) is recalling certain 2016-2018 International LT, 2016-2017 International ProStar, 2017-2018 International LoneStar and International RH heavy diesel trucks. The air dryer mounting bracket may fracture, causing air system leaks or a loss of air pressure to the brake system. Remedy: Navistar will notify owners, and dealers will replace the air dryer mounting bracket, free of charge. The recall began on May 12, 2017. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for the recall is 17502.
Navistar, Inc. (Navistar) is recalling certain 2017 International ProStar, LoneStar, 9900i, and TranStar trucks. The affected vehicles have a metallic battery cover latch that may unlatch and contact the battery jump start stud, causing an electrical short to ground if the jump start stud is not covered. Remedy: Navistar will notify owners, and dealers will install a latch stop to prevent the latch from rotating to the unlatched position, free of charge. The recall began on January 27, 2017. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 16513.
Navistar, Inc. (Navistar) is recalling certain 2000-2001 International 4700, 2000-2002 4900, 2001-2003 8100 (TranStar) and 9100I, 2002-2003, 2005, 2007-2009, 2012-2014 and 2016-2018 DuraStar, 2012 and 2014-2017 ProStar, 2014-2015 TerraStar, and 2018 LT trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' fire extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf Remedy: Navistar will notify owners, instructing them to notify Kidde for a replacement fire extinguisher, free of charge. The recall is expected to begin February 9, 2018. Owners may contact Navistar customer service at 1-331-332-1590, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information.
Navistar, Inc. (Navistar) is recalling certain model year 2017 International ProStar, LoneStar, PayStar, HX, and 9900 trucks equipped with a Cummins ISX15L engine using certain engine control modules (ECM). These ECM's may experience an internal electrical short that can cause a fuse to blow, resulting in an unexpected engine stall without the ability to restart the engine. Remedy: Cummins will notify owners, and Cummins dealers will replace the ECM, free of charge. The recall began on July 8, 2016. Owners may contact Cummins customer service at 1-800-343-7357 or Navistar customer service at 1-331-332-1590.
Navistar, Inc. (Navistar) is recalling certain model year 2014-2017 International ProStar trucks manufactured June 11, 2013, through May 19, 2016. In the affected vehicles, the connection for the cube fuse terminal may break resulting in a total loss of power to the cab and an unexpected engine stall. Remedy: Navistar will notify owners, and dealers will replace the cube fuse with a chassis-mounted power distribution module (PDM), free of charge. An interim notice was sent to owners on September 14, 2016. The recall began on October 28, 2016. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 16508.
Navistar, Inc. (Navistar) is recalling certain 2000-2003 International 8100, 2001-2003 International 9100i, 2001-2007 International 9400i, 2001-2010 International 9200i, 2002-2007, 2009 International 8500, 2003-2007, 2013 International 9900i, 2003-2018 International 8600, 2004, 2007 International 9900iX, 2008-2018 International ProStar, 2010-2011, 2013, 2016 International LoneStar, 2011-2012, 2016 International 4400, 2017-2024 International LT, 2018-2024 International RH, 2019-2021 International LS, 2019-2024 International MV vehicles. The back-up lights offer low visibility when the vehicle is in reverse and bobtail mode. Also, the vehicles have not been equipped with additional unobstructed back-up lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: Dealers will replace the existing rear stop/turn signal lights, free of charge. Owner notification letters were mailed May 06, 2024. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23514.
Navistar, Inc. (Navistar) is recalling certain 2016-2017 International TranStar, 2017-2019 International ProStar, International LoneStar, 2017-2020 International DuraStar, WorkStar, and 2018-2019 IC Bus HC Commercial buses. The heating, ventilation, and air-conditioning (HVAC) blower motor circuit may have an insufficient wiring terminal that can overheat. Remedy: Dealers will replace the HVAC blower motor load circuit wiring terminal, free of charge. Owner notification letters are expected to be mailed June 5, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23510.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks, the backup lamps could be blocked and may not be visible. As a result, the trucks don't meet the requirements of the Canadian regulations. Note: This recall only affects trucks equipped with a pintle hook lowering bracket and feature code 01WPN, 01 WPS, or 01VAL. Safety Risk: Backup lamps that aren't visible could cause a person not to recognize that the vehicle is backing and increase the risk of a crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealership to install new tail stop/turn signal lamps with integrated backup lamps.
Issue: On certain trucks, a wire terminal for the blower motor circuit breaker in the power distribution module (PDM) could overheat and melt. Safety Risk: Wiring that overheats and melts can create the risk of a fire. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealership to replace the blower motor wiring terminal in the PDM. The dealership will also inspect and, if necessary, replace the fuse block.
Issue: On certain vehicles, the exhaust hanger brackets may crack and allow the tail pipe to separate from the vehicle. Safety Risk: If the exhaust tail pipe falls off, it could become a hazard for road users and bystanders. This could create a risk of injury and/or a crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the rear exhaust hanger bracket replaced. Dealers will also inspect and replace any forward bracket found cracked and/or tail pipe that is damaged.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain trucks built with a Cummins X15 or ISX15 engine equipped with nylon fuel lines and a banjo bolt on the fuel pump, a blockage in the fuel cooling system may cause a fuel line to burst. This could result in a significant fuel leak onto the roadway, which would create a road hazard for other motorists. Additionally, this condition could also cause an engine stall without warning, without the ability to restart the engine. Both of these conditions may increase the risk of a crash causing injury and/or damage to property. Correction: Cummins-authorized dealers will replace the affected nylon line with a steel line.
On certain vehicles, the air dryer mounting bracket may fracture and cause the air dryer to separate the frame. This could potentially cause the air lines to separate from the dryer resulting in an air system leak or loss of air pressure to the brake system, which would increase stopping distances and increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the air dryer mounting bracket with an updated heavy duty bracket.
On some vehicles, the metallic battery box cover latch, when unlatched from its anchor, may articulate and potentially contact the battery jump start stud. If the jump start stud's protective cover has fallen off or is not installed, this may result in an electrical short to ground, increasing the risk of a fire causing injury and/or property damage. Correction: Dealers will install a latch stop to prevent the latch from potentially contacting the stud.
On certain vehicles equipped with the battery box mounted between the frame rails, the battery mounted cube fuse terminal connection could potentially break. A broken cube fuse terminal connection could cause the cab to lose all power which would result in a loss of motive power, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the cube fuse with a chassis mounted power distribution module (PDM) inside the battery box.