Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2017 Polaris Slingshot, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Polaris Industries, Inc. (Polaris) is recalling certain 2017-2019 Polaris Slingshot S, Slingshot SL, Slingshot GT LE, and Slingshot SLR motorcycles. In the event of a crash, the seatbelt retractor on the side opposite of the impact may separate, preventing the seatbelt from locking. Remedy: Polaris will notify owners, and dealers will install a kit that prevents the retractor from separating in the event of a crash, free of charge. The recall began August 28, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-03.
Polaris Industries, Inc. (Polaris) is recalling certain 2017-2018 Polaris Slingshot, Slingshot SL, Slingshot SLR, Slingshot SL Icon, and Slingshot GT LE motorcycles. The brake pedals may have been incorrectly installed, allowing the brake pedal to separate from the brake master cylinder. Remedy: Polaris will notify owners, and dealers will inspect the engagement of the brake pedal retaining clip and reassemble it if necessary, free of charge. The recall began on June 5, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-02.
Polaris Inc. (Polaris) is recalling certain 2015-2019 Slingshot motorcycles. Excessive electrical current may damage the battery fuse holder terminals. Remedy: Polaris will notify owners, and dealers will inspect the battery fuse block terminals and relocate the 50 amp chassis fuse, free of charge. The recall began October 24, 2019. Owners may contact Polaris customer service at 1-855-863-2284. Polaris's number for this recall is T-19-01.
Polaris Industries, Inc. (Polaris) is recalling certain model year 2015-2017 Slingshot motorcycles manufactured March 4, 2014, to September 7, 2016. The affected vehicles may have been manufactured with a swing arm that has insufficient strength. Remedy: Polaris will notify owners, and dealers will inspect, and repair or replace the swing arm, as necessary, free of charge. The recall began December 2016. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-16-06.
Polaris Idustries, Inc. (Polaris) is recalling certain model year 2015-2017 Slingshot motorcycles manufactured March 4, 2014, to October 7, 2016. The affected vehicles may have insufficient clearance between the fuel line and the hood structure. Remedy: Polaris will notify owners, and dealers will replace the replace the engine fuel line, and inspect the retention clips to reduce the risk of interference, free of charge. The recall began December 2016. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-16-03.
Polaris Industries, Inc. (Polaris) is recalling certain 2015-2017 Slingshot vehicles. The affected vehicles previously had their rear swingarms replaced during the remedy of NHTSA recall number 16V-255. The replacement swingarms may have been installed without the sealing grommets installed, potentially resulting in road debris contaminating the rear wheel speed sensor. Remedy: Polaris will notify owners, and dealers will inspect the swingarms for missing grommets, installing them as necessary, free of charge. The recall began June 13, 2017. Owners may contact Polaris customer service at 1-888-704-5290. Polaris' number for this recall is T-17-04.
Polaris Industries, Inc. (Polaris) is recalling all 2015-2018 Polaris Slingshot motorcycles. The driver-seat and passenger-seat seat belt and seat back anchoring bracket may have been improperly welded. Additionally, differences in the seat assembly may prevent proper latching of the seat slider, allowing the driver's seat to move unexpectedly. Remedy: Polaris will notify owners, and dealers will inspect the seat belt bracket and seat back welds, and the seat slider latching function. If the weld is missing or incomplete, or if the slider doesn't latch properly, the seat bases will be replaced, free of charge. The recall began on April 16, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-01.
Polaris Industries, Inc. (Polaris) is recalling certain 2017 Slingshot, Slingshot SL, and Slingshot SLR vehicles. Three of the bolted connections between the steering and the front suspension may have been insufficiently tightened, possibly resulting in a reduction of steering and/or front suspension performance. Remedy: Polaris will notify owners, and dealers will replace the affected nuts and bolts, tightening them correctly, free of charge. The recall began on March 23, 2017. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-17-01.
Polaris Industries, Inc. (Polaris) is recalling certain model year 2016-2017 Slingshot motorcycles manufactured December 28, 2015, to April 27, 2016. The brake pressure switch may have been over tightened in the affected motorcycles. Remedy: Polaris will notify owners, and dealers will install new brake pressure switch seals, free of charge. The recall began December 2016. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-16-02.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain vehicles, the driver's seat belt anchor point may be positioned too high. Canadian regulations require seat belt anchorages to be installed in certain locations. Safety Risk: This small error does not affect the safety or function of the seat belt. Corrective Actions: This is not a recall. Polaris has made changes to ensure that all new vehicles have the driver's seat belt anchor point in the correct location.
Issue: On certain vehicles, the terminals of the battery fuse block could be damaged during normal driving. This can result in a loss of forward and rear lighting, a loss of gauges, and a loss of power steering assist. Safety Risk: A loss of forward lighting would reduce visibility. A loss of rear lighting could make the vehicle less visible and cause a following driver to not recognize that a vehicle ahead is braking. A loss of power steering assist could make the vehicle difficult to steer. These failures could increase the risk of a crash. Corrective Actions: Polaris will notify owners by mail and instruct them to take their vehicle to a dealer to inspect the battery fuse block terminals and relocate the 50-A chassis fuse.
Issue: On certain vehicles, the seat base may have been assembled improperly. This could cause the seat belt buckle to detach or cause the seat slider not to latch properly. This could result in unexpected movement of the seat or seat back. Safety Risk: If the seat moves while driving, vehicle control could be affected. In a crash, a seat that moves or a seat belt that separates could increase the risk of injury. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the seat belt bracket and the seat slider latch inspected. If an incomplete or missing weld is found, or if a slider does not latch properly, the seat base will be replaced. Note: This supersedes Recall 2018-144. Vehicles repaired under the previous recall do not require repair under this recall.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
Under certain conditions, the capability of the battery fuse block terminals might be exceeded by the actual electrical current requirements. Production: The affected vehicles were manufactured between 15/05/2014 and 25/04/2016.. Types: Model year 2015 and 2019.
The driver and passenger seatbase frames may lack welds and the driver seatbase frame may contain a seat slider defect. Production: Specific motorcycles built between 22/04/2014 and 26/02/2018..
Production: Specific vehicles built between 22/04/2014 and 26/09/2016. Types: Model Years 2016 and 2017.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
On certain vehicles, a problem with the seat belts could cause them not to stay tight during a side crash. Specifically, the seat belt retractor on the opposite side of the impact may separate and fail to keep the belt locked, creating an increased risk of injury. Correction: Dealers will install energy management loops that provide secondary retention of the seat belt and reduce lateral loading.
On certain vehicles, the pin and retaining clip that join the brake pedal to the master cylinder may have been installed incorrectly. This could allow the separation of the brake pedal from the master cylinder, resulting in a complete loss of brake function and increase the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect the connection between the brake pedal and master cylinder and repair as necessary.
On certain vehicles, the seat belt buckle and seat back may dislodge from seat base and/or the seat sliders may not latch properly. If the seat were to slide unexpectedly, vehicle control could be affected, and/or in the event of a crash, if the seat belt buckle and seat back were to dislodge from the seat base, an occupant may not be properly restrained, which would increase the risk of injury and/or damage to property. Correction: Dealers will inspect the weld of the seat belt bracket and inspect the seat slider latching function. If a weld is found incomplete or missing, or if a slider does not latch properly, the seat base will be replaced. Note: This recall is superseded by recall 2019136. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019136">recall 2019136</a> for more information.
On certain vehicles which had a rear swing arm previously replaced under recall T-16-06 (Transport Canada no. 2016-520), the swing arm may have been installed without two dust plug grommets. Without dust plug grommets, debris could contaminate the rear wheel speed sensor, which could affect ABS and Traction/Stability Control functions, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect for the presence of the grommets, and install if found missing. Note: If the speed sensor were to become inoperative, ABS and Traction/Stability control dash lights would illuminate.
Certain three-wheeled vehicles may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 202 - Head Restraints. The vehicles imported from the U.S. to be sold in Canada are equipped with seats that do not meet the requirements of the Canadian standard. A thinner seatback and head restraint could increase the risk of injury to the occupants in the event of a crash. Correction: Dealers will replace the seats.
On certain vehicles, due to a defect in manufacturing, the rear swing arm may not meet strength specifications. This could result in the potential for the swing arm to fracture if the vehicle were to strike a pothole, or be subjected to a severe event, which could result in a a loss of control and a loss of propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the rear swing arm with a swing arm with a stronger geometry.
On certain vehicles, there may be insufficient clearance between the fuel line and hood structure. This can result in abrasion of the fuel line, which could result in a potential fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace and re-route the fuel line.