Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2017 RAM 3500, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Chrysler (FCA US LLC) is recalling certain 2013-2018 Ram 3500 and 2014-2018 Ram 3500 Chassis Cab and Ram 2500 vehicles. The outboard steering linkage jam nut may loosen, allowing one end of the drag link to separate. Remedy: Chrysler will notify owners, and dealers will check the steering linkage jam nut tightness, replacing the drag link assembly or welding the nut to the adjuster sleeve, free of charge. The recall began March 22, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V06.
Streetcar ORV LLC (Streetcar) is recalling certain American Expedition Vehicles (AEV) 3" Dualsport aftermarket suspension kits, part numbers N0436000 and N0436001, sold for installation on 2013-2018 RAM 2500 and 3500HD trucks. Improper installation and machining of the original equipment steering knuckle may weaken the joint between the steering drag link and knuckle. Remedy: Streetcar will notify owners and dealers will inspect and install a new steering knuckle, free of charge. The recall began December 3, 2018. Owners may contact AEV customer service at 1-248-926-0256, extension 500.
Chrysler (FCA US LLC) is recalling certain 2015-2017 Ram 1500, 2500 and 3500 pickup trucks equipped with an 8 foot bed and a power locking tailgate. Chrysler is also recalling all 2013-2014 and 2018 Ram 1500, 2500 and 3500 pickup trucks built before April 1, 2018 with a 6 or 8 foot bed and a power locking tailgate. On August 29, 2019 Chrysler expanded the recall to include an additional 693,128 model year 2013-2014 Ram 1500, 2500 and 3500 pickup trucks. The tailgate actuator limiter tab may fracture and cause the tailgate to unlatch and open while driving. Remedy: Chrysler will notify owners, and dealers will repair the tailgate latch, free of charge. The recall began May 23, 2019. Chrysler is expected to notify owners of the expanded population on October 18, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's number for this recall is V44. Note: 2015-2017 MY Ram 1500 pickup trucks with truck beds other than 8 foot, are currently covered under NHTSA recall 18V-486 for this issue.
Chrysler (FCA US LLC) is recalling certain 2015-2017 RAM 1500, 2500, and 3500 pickup trucks equipped with a power locking tailgate and either a 5 foot, 7 inch or 6 foot, 4 inch bed. The tailgate actuator limiter tab may fracture and cause the tailgate to unlatch and open while driving. Remedy: Chrysler will notify owners, and dealers will repair the vehicle, free of charge. The recall began September 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U74.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating. Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation. Remedy: Dealers will update the torque specification in the owner's manual and other published service documents. Dealers will also inspect the vehicle's wheel studs, replacing them if necessary, free of charge. Owner notification letters were mailed on November 30, 2021. Campaign Y36 owner notification letters were mailed on November 30, 2021. Campaign Y26 owner notification letters were mailed on December 1, 2021. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's numbers for this recall are Y26 and Y36.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition. Remedy: Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Streetcar ORV LLC, dba American Expedition Vehicles (AEV) is recalling certain 2013-2017 RAM 2500 and 3500 heavy duty trucks, modified by AEV to be equipped with cast aluminum Katla 8.5" road wheels. The outer surface of the wheel may fracture, resulting in rapid air loss. Remedy: AEV will notify owners, and dealers will replace the wheels with wheels of similar value, free of charge. The recall began on August 30, 2017. Owners may contact AEV customer service at 1-248-926-0256 extension 500.
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Chrysler (FCA US LLC) is recalling certain 2017-2018 RAM 1500, 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition. Remedy: Chrysler will notify owners and dealers will update the Body Control Module software. Dealers will also test the BTSI operation, replacing the solenoid as necessary. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U11.
Chrysler (FCA US LLC) is recalling certain 2013-2017 RAM 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, equipped with Cummins 6.7L Turbo Diesel engines that have Concentric-brand water pumps without a vent hole. These water pumps may leak coolant. Remedy: Chrysler will notify owners, and dealers will replace the water pumps, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T51.
Chrysler (FCA US, LLC) is recalling certain 2017-2018 Ram 2500 Pickup, Ram 3500 Pickup, 3500 Cab Chassis, 4500 and 5500 Cab Chassis vehicles. The hydraulic control unit (HCU) may fail, which can cause the anti-lock brake (ABS), electronic stability control (ESC), and traction control systems to fail. Remedy: Dealers will replace the brake HCU, or replace the HCU motor, free of charge. Owner notification letters were mailed beginning January 9, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is C4B.
Chrysler (FCA US, LLC) is recalling certain 2016-2019 Ram 3500, Ram 1500, 2016-2020 Ram 2500, and 2016 Ram 3500 Cab Chassis vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect. Remedy: Dealers will replace one or both side curtain air bags, as necessary, free of charge. Owner notification letters were mailed February 13, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's numbers for this recall are 05C, 09C, and 10C.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks, the side curtain airbag inflators may be defective. As a result, the driver and/or passenger side curtain airbag inflator(s) could rupture unexpectedly and metal fragments could be propelled toward vehicle occupants. Note: This recall also affects certain 2016 model year RAM 3500 chassis cab incomplete vehicles. Safety Risk: An airbag inflator that ruptures can create a risk of injury. Corrective Actions: FCA Canada will notify owners in writing and advise you to take your truck to a dealership to replace the affected side curtain airbag(s).
Issue: On certain trucks, the brake hydraulic control unit could fail. Over time, this could cause the antilock braking system (ABS), electronic stability control (ESC) system and/or traction control not to work. Note: This recall also affects certain RAM 3500, 4500 and 5500 chassis cab incomplete vehicles. Safety Risk: An antilock braking system, electronic stability control system and/or traction control system that doesn't work could increase the risk of a crash. Corrective Actions: FCA Canada will notify owners in writing and advise you to take your truck to a dealership to replace the brake hydraulic control unit.
Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French. Safety Risk: This error does not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the tire and loading information label for all new vehicles.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain pickup and chassis-cab trucks, the owner's manual and service manual list the wrong torque specification for the wheel nuts. As a result, some trucks may have had the lug nuts over-tightened during servicing. This can damage the wheel studs and, over time, they could break. If this happens, a wheel could separate from the truck. Note: This recall only affects trucks equipped with dual rear wheels and flanged lug nuts. Safety Risk: A wheel separation could cause a loss of control and increase the risk of a crash. A wheel that separates could also hit another person or vehicle. Corrective Action: FCA Canada will contact owners by mail and instruct you to take your truck to a dealer to inspect and replace the wheel studs, as necessary. They will also provide an update for the torque specification listed in the owner's manual.
Issue: This recall is for certain replacement parts for use on Ram Heavy Duty trucks that were sold by dealer parts departments. This recall is not being conducted under the requirements of the Motor Vehicle Safety Act. If the outboard steering linkage jam nut is not welded according to the Dealer Service Instructions for safety recall V06, it could loosen and allow one end of the drag link to separate from the adjuster sleeve. A drag link separation can result in a loss of steering control. The following 4x4 style steering system parts are included in this recall: Drag Link Assembly (Part # 68369907AA) Jam Nut (Part # 06510749AA and Part # 06510750AA) Drag Link Outer (Part # 68111301AA) Drag Link Adjuster (Part #68111302AA) Drag Link Inner (Part # 68111304AA) Safety Risk: A loss of steering control could increase the risk of a crash. Corrective Actions: FCA Canada will notify potential owners using dealer sales records. Owners will be instructed to take their vehicle to a dealer to inspect the drag link assembly. If the drag link is not welded but the jam nuts are properly tightened, the nuts will be welded to the adjuster sleeve. If the nuts are not properly tightened, the drag link assembly will be assessed for replacement. If a component or assembly is returned, FCA will reimburse the customer.
Issue: On certain trucks equipped with a power locking tailgate, the tailgate may open while driving. If this occurs, cargo that is not secured could fall out of the truck bed and onto the road. Note: This is an expansion of recall U74 (Transport Canada recall 2018-398). Safety Risk: Cargo that falls from the truck bed could create a road hazard for others. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a dealer to modify the tailgate locking mechanism. Note: This recall supersedes recall 2019-221
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Issue: Note: This recall is superseded by recall 2019441. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019441">recall 2019441</a> for more information. On certain trucks equipped with a power locking tailgate, the tailgate may open while driving. If this occurs, cargo that is not secured could fall out of the truck bed and onto the road. Note: This is an expansion of recall U74 (Transport Canada recall 2018-398). Safety Risk: Cargo that falls from the truck bed could create a road hazard for others. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a dealer to modify the tailgate locking mechanism.
Issue: On certain trucks, a nut in the steering system could loosen and cause a loss of steering control. This problem affects trucks equipped with a 4x4 style steering system. Safety Risk: A loss of steering control would increase the risk of a crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to inspect the outboard steering linkage jam nut. If the nut is properly tightened, it will be welded to the adjuster sleeve. If the nut is not properly tightened, the drag link assembly will be replaced.
Certain trucks equipped with a power locking tailgate may experience unintended opening of the tailgate. If this occurs while driving, unrestrained cargo could fall out of the box and create a road hazard, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will modify the locking mechanism.
On certain vehicles, an electronic fault may create a situation where the cruise control cannot be deactivated. If this occurs and the driver does not apply the brakes or shift the transmission to neutral, the vehicle could maintain speed or accelerate without warning, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the Powertrain Control Module (PCM) software and perform an update as necessary. Note: In the interim, owners are advised not to use the cruise control until the vehicle is repaired.
FCA Canada has determined that some Mopar gooseneck trailer hitch ball kits may not fully seat and lock into the truck hardware as intended. This can be caused by dirt and/or debris accumulation on top of the gooseneck ball mount, in the mounting hole and/or tolerance stack-up. If this occurs, the gooseneck ball may appear to be locked in place when it is not. If the gooseneck ball is not locked in place, under certain driving conditions it may detach from the truck. Affected parts are the Mopar 2 5/16‘’ Gooseneck Ball Kit part number 82213631 and Mopar 3” Gooseneck Ball Kit part number 82213632. Correction: FCA Canada will conduct a voluntary field action on all affected parts. The remedy for this condition is currently under development. Note: This field action is not being conducted under the requirements of the Motor Vehicle Safety Act.
On certain vehicles equipped with a steering column gear shifter, the brake transmission shift interlock (BTSI) may become inoperative. This could allow the steering column gear shifter lever to be shifted out of the PARK (P) position without depressing the service brake pedal or having the key in the ignition, which could result in unintended vehicle movement, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and replace the BTSI as necessary. The Body Control Module (BCM) will also be updated.
On certain vehicles equipped with the Roadside Emergency Kit containing a Kidde fire extinguishers with black plastic handles and valves, the fire extinguishers may become clogged or require excessive force to activate. Also, the nozzle may detach from the valve assembly with enough force that it could cause injury, and fail to discharge. In case of fire, failure of the extinguisher to function could result in injury and/or property damage. Correction: Dealers will replace the suspect Kidde fire extinguisher with a new Kidde fire extinguisher with a steel nozzle. For more information about recalled fire extinguishers, please visit <a href="https://inmarmarketaction.com/kidde/Kidde284CA/">www.kidde.com</a>.
On certain vehicles equipped with a steering column gear shifter, the brake transmission shift interlock (BTSI) may become inoperative. This could allow the steering column gear shifter lever to be shifted out of the PARK (P) position without depressing the service brake pedal or having the key in the ignition, which could result in unintended vehicle movement, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and replace the BTSI as necessary. The Body Control Module (BCM) will also be updated.