Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2019 BMW X5, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
BMW of North America, LLC (BMW) is recalling certain 2019 BMW X5 xDrive40i and X5 xDrive50i vehicles. The driver and/or passenger sun visor may have an incorrect air bag warning label, or the label may be missing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant crash protection." Remedy: BMW notified owners, and dealers will inspect the driver and passenger sun visor, replacing the visors as necessary, free of charge. The recall began January 4, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020 750i xDrive, 2019 M850i xDrive Coupe, M850i xDrive Convertible, X5 xDrive50i, X7 xDrive50i, and M5 vehicles. The high pressure fuel pump may not have been properly attached to the engine, which may cause the fuel pump flange to crack, resulting in a fuel leak. Remedy: BMW will notify owners, and dealers will replace the high pressure fuel pumps, free of charge. The recall began August 27, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019 BMW X5 xDrive40i vehicles. The capacitors within the Body Domain Controller (BDC) may short circuit and overheat. Remedy: All affected vehicles remain on dealer lots, therefore owner letters will not be mailed. BMW dealers will replace the BDC control unit, free of charge. The recall began on October 17, 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019-2021 X3 sDrive30i, X3 xDrive30i, X3 M40i, X3M, X4 xDrive30i, X4 M40i, M550i, X4M, X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5M, X5 M50i, X7 xDrive40i, X7 xDrive50i, X7 M50i, Alpina XB7, 330i, 330i xDrive, M340i, M340i xDrive, and 8 Series Coupe, Convertible and Grand Coupe, 840i, 840i xDrive, M850i xDrive, M8, 2020-2021 530e, 530e xDrive, 330e, 330e xDrive, 745Le, 745Le xDrive, X5 xDrive45e, X3 xDrive30e, X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6 M50i, X6M, 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 740i, 740Li, 740Li xDrive, M760i Drive, M760Li xDrive, 750Li xDrive Alpina, Alpina B7 xDrive, and 2021 4 Series Coupe 430i, 430i xDrive, M440i xDrive vehicles. When shifting into Reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility." Remedy: BMW will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began April 16, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019 X5 xDrive50i and X7 xDrive40i vehicles. The left side wheel bolts may have been insufficiently tightened and may loosen over time. Remedy: BMW will notify owners, and dealers will replace and tighten the left side wheel bolts, free of charge. The recall began July 16, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2018 540d, 2018-2020 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 530e, 530e xDrive, X3 sDrive, X3 xDrive, X3 M40i, X3 M, and 2019-2020 X4 xDrive, X4 M40i, X4 M, X7 xDrive, X7 M50i, 740Li, 740Li xDrive, 750Li, 750Li xDrive, 8 Series Convertible and Coupe 840i, 840i xDrive, M850i xDrive, X5 sDrive, X5 xDrive, X5 M50i, X6 xDrive, X6 M50i, 330i, 330i xDrive, M340i, M340i xDrive, Z4 sDrive, Z4 M40i, 740Le xDrive and 745Le xDrive, 2018-2019 640i xDrive Gran Turismo and Rolls-Royce Phantom, 2019 M850i xDrive Gran Coupe and Rolls-Royce Cullinan and 2020 Toyota Supra vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors." Remedy: BMW will notify owners, and dealers will update the back-up camera software, free of charge. The recall began November 8, 2019. Owners may contact BMW customer service at 1-800-525-7417 or Rolls-Royce at 1-877-877-3735. Toyota owners may contact Toyota customer service at 1-888-270-9371.
BMW of North America, LLC (BMW) is recalling certain 2019-2020 X5 sDrive40i, X5 xDrive40i and X5 xDrive50i vehicles and 2020 X6M vehicles. The steering column shaft bearing plate may not have been properly attached to the vehicle, allowing it to loosen. Remedy: BMW will notify owners, and dealers will inspect the steering column shaft bearing plate and properly attach or replace it, as necessary, free of charge. BMW telephoned owners and all of the vehicles have been remedied. No owner notification letter is necessary. Please contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020-2021 8 Series Coupe, Grand Coupe and convertible 840i, 840i xDrive, M850i xDrive, M8 and 740 Li, 740 Li xDrive, 750 Li xDrive, M760 Li xDrive, X6 sDrive40i, X6 xDrive40i, X6 xdrive50i, X6 M50i, X6M, and 2019-2021 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M, X7 xDrive40i, X7 xDrive50i, X7 M50i, and 2021 M3, M3 Competition, M4 Coupe, M4 Competition Coupe, X5 xDrive45e, 745 Le xDrive. The rotor and shaft within the integrated brake system may not have been welded properly and could separate during a hard braking event, possibly resulting in a loss of the Antilock Brake System (ABS) and braking assistance. Remedy: BMW will notify owners, and dealers will replace the integrated brake system, free of charge. Owner notification letters were mailed on May 25, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019 X5 xDrive40i and xDrive50i vehicles. The attachment bolts for the driver's seat and/or seat belt may not have been properly tightened. Remedy: BMW will notify owners, and dealers will inspect the attachment bolts for the driver's seat and seat belt, and torque them to the correct specifications, as necessary, free of charge. The recall began April 9, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling one 2019 X5 xDrive 40i vehicle. The instrument panel may not have been manufactured correctly, which could prevent the passenger side air bag from deploying properly in a crash. Remedy: A dealer will replace the instrument panel, free of charge. Owner notification letters were mailed on July 26, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2022 4 Series Gran Coupe (430i, 430i xDrive, M440i xDrive); 2019-2022 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M; 2021-2022 X5 xdrive45e; 2020-2022 X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6M and 2019-2023 X7 xDrive40i, X7 xDrive50i, X7 M50i, X7 xDrive60i, X7 M60i, X7M, Alpina XB7 vehicles. The roof function control unit may be programmed incorrectly, allowing the sunroof to close without the key fob present inside the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 118, "Power-Operated Window Systems." Remedy: Dealers will reprogram the roof function control unit, free of charge. Owner notification letters were mailed June 20, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC is recalling certain 2019-2020 X5, X7, 2020 3 Series Sedan, X6, 2020-2021 7 Series Sedan, 2020 8 Series Convertible, 8 Series Coupe, and 2020 8 Series Gran Coupe vehicles. Please see the recall report for the complete list of models. In the event the starter motor fails, repeated attempts to start the vehicle can cause the starter motor to overheat from an electrical overload. Remedy: Dealers will update the vehicle software, free of charge. Owner notification letters were mailed September 27, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020 340I, X6, 2020-2025 840I, 2020-2022 740LI, 2019-2020 X7, and X5 vehicles. After repeated attempts, the starter motor may overheat from an electrical overload. Remedy: Dealers will replace the engine starter, free of charge. This recall includes vehicles repaired under recall 24V576 and those owners will need to have their vehicle repaired again. Owner notification letters were mailed February 9, 2026. Owners may contact BMW customer service at 1-800-525-7417. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov November 17, 2025.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: Under certain conditions, the windshield wiping system may not meet certain requirements of Canadian regulations. Safety Risk: This small error does not affect safety. Corrective Actions: This is not a recall. BMW has made changes to ensure that all new vehicles meet Canadian regulations.
Issue: On certain vehicles, the recall repairs completed by a BMW dealer during recall 12 83 24RC (Transport Canada recall no. 2024-444) may not be effective. As a result, certain vehicles require a second repair. On certain vehicles, if you try to start the engine repeatedly, the starter could overheat. If this happens, and nearby components contact the starter, it could cause a fire. Safety Risk: A fire can create the risk of injury. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the engine starter.
Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French. Safety Risk: This error does not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the tire and loading information label for all new vehicles.
Issue: On certain vehicles, if you try to start the engine repeatedly, the starter could overheat. If this happens, and nearby components contact the starter, it could cause a fire. Safety Risk: A fire can create the risk of injury. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to update the vehicle software.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain vehicles, a software problem could allow you to close the sunroof remotely without the key fob inside the vehicle. Canadian regulations require the key fob to be in or near the vehicle when closing the sunroof. Safety Risk: A sunroof that can be closed without the key fob in or near the vehicle could create a risk of injury. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealership to reprogram the roof function control unit. Alternatively, you can download an over-the-air update to fix this problem.
Issue: On certain vehicles, a software problem could cause the rearview camera image not to appear correctly in the central display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety Risk: A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to update the rearview camera software, if necessary.
Issue: On certain vehicles, the rearview camera does not return to the default settings when it turns on. This could make the rearview image difficult to see if a driver had previously adjusted the camera display brightness at or near the lowest setting, and contrast at or near the highest setting. Canadian regulations require that the rearview display returns to the default view each time the camera is turned on. Safety Risk: Reduced rear visibility could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the software for the rearview camera. Drivers are recommended not to adjust the display brightness at or near the lowest setting, and contrast at or near the highest setting, until this recall is completed.
Issue: The wheel bolts on the left side of certain vehicles may not be properly tightened. This could cause the bolts to loosen or fall off, and could result in a wheel separating from the vehicle. Safety Risk: A wheel separation could increase the risk of a crash. A wheel that separates could also hit another person or vehicle. Corrective Actions: BMW will notify owners by mail and instruct them to take their vehicle to a dealer to replace the left side wheel bolts and ensure they are properly tightened. Owners are advised to not drive their vehicle until the recall repairs are completed.
Issue: On certain vehicles, the high-pressure fuel pumps (HPFP) may have been attached to the cylinder head incorrectly. Over time, this could cause the flange of the HPFP to crack. This could result in a fuel leak in the engine compartment. Safety Risk: A fuel leak in the engine compartment could increase the risk of a fire. Corrective Actions: BMW will notify owners by mail and instruct them to take their vehicle to a dealer to replace the high-pressure fuel pumps.
Issue: One BMW X5 was produced without a vehicle identification number (VIN) label under the windshield. Canadian regulations require the VIN to be clearly visible from outside the vehicle. Safety Risk: This labelling error is unlikely to affect safety. Corrective Actions: BMW will notify the owner by mail and instruct them to take their vehicle to a dealer to install a VIN label.
Issue: On certain vehicles, the bolts for the driver's seat and/or seat belt may not be properly tightened. This could cause the seat or seat belt come loose or detach in a crash. Drivers may notice a rattling noise in the area near the bottom of the seat if the bolts are loose. Safety Risk: A driver that is not properly restrained could be injured in a crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a BMW dealer to have the bolts for the driver's seat and seat belt inspected and tightened, as required.
The affected vehicle may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection in Frontal Impacts. The airbag warning label on the driver and/or passenger side sun visors may be incorrect or missing. A missing or incorrect sun visor air bag warning label would not provide the required air bag warning information to the driver and/or passenger, which could increase the risk of injury. Correction: A dealer will inspect the vehicle and install a new driver and/or passenger sun visor with the correct label as necessary.