Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2019 International LT, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Navistar, Inc. (Navistar) is recalling certain 2019 International HV, MV, 2018-2019 HX, LT, RH, LoneStar, ProStar, WorkStar, and 2018 TranStar automated manual transmission vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement. Remedy: Navistar will notify owners, and dealers will recalibrate the Transmission Control Module (TCM), free of charge. The recall began January 18, 2019. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18518.
Navistar, Inc. (Navistar) is recalling certain 2018-2019 International HX and LT trucks equipped with a Cummins ISX engine and a Wabco 37.4 air compressor. The air compressor discharge line may contact the fuel filter inlet and outlet lines (fuel lines) and the heat generated from the air compressor discharge line may cause heat damage to the fuel lines. Remedy: Navistar will notify owners, and dealers will replace the straight fitting on the air compressor discharge line and the discharge line with a 45-degree fitting and a redesigned discharge line, free of charge. The recall began on July 20, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18511.
Navistar, Inc. (Navistar) is recalling certain 2017-2018 International ProStar and 9900i trucks, 2018-2019 International LT trucks, 2017-2019 International LoneStar and HX trucks and 2017 International PayStar trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted. Remedy: Cummins will notify the affected owners and dealers will replace the nylon fuel line with a steel fuel line, free of charge. Navistar issued owners an interim notification on October 11, 2018. The recall began November 21, 2018. Owners may contact Navistar customer service at 1-800-448-7825, or Cummins customer service at 1-800-286-6467.
Truck-Lite Company, LLC (Truck-Lite) is recalling certain right-hand incandescent halogen headlights, part numbers Truck-Lite 27628C, 27628C7, Navistar 4049970C91, 4049970C92, 4049970C93, and 4049970C94, for installation on Navistar International LT-series trucks. The headlights may have incorrect "VOL" markings when they should be marked as "VOR." These headlights are correctly designed to be visually/optically aimed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associate d Equipment." Remedy: Truck-Lite will notify owners and will send them a "DOT VOR" label to install, free of charge. The recall began November 26, 2018. Owners may contact International Trucks Customer Service Center at 1-800-448-7825.
Navistar, Inc. (Navistar) is recalling certain 2019 International HX, DuraStar, WorkStar, HV, LoneStar, LT, MV, and RH vehicles, and IC Bus HC, CE, and RE vehicles equipped with long stroke brake chambers and spring actuated parking brakes. The spring actuated parking brake may be improperly crimped to the long stroke service brake chamber, causing a service brake air leak and the possible separation of the spring brake chamber from the service brake section. Remedy: Navistar will notify owners, and dealers will replace the brake chamber assemblies from the suspected lot, free of charge. The recall began October 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18512.
Navistar, Inc. (Navistar) is recalling certain 2018-2020 International LT and 2019-2020 International RH trucks. The wrist pin bushing of the engine connecting rod may fail. Remedy: Navistar will notify owners and dealers will install a detection system to warn the driver prior to engine connecting rod failure, and engines with a defective connecting rod will be repaired, free of charge. The recall began July 8, 2020. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 20504.
Navistar, Inc. (Navistar) is recalling certain 2016-2020 International LT and 2017-2018 Prostar 73-inch sleeper cab models equipped with feature code 07BKP or 07BKR (exhaust system with horizontal after treatment device and horizontal tailpipe mounted on right side). In the affected vehicles, the rear exhaust hanger bracket may crack, which can cause the forward hanger bracket to also crack. If both brackets crack, the exhaust tail pipe may detach from the vehicle. Remedy: Navistar will notify owners, and dealers will replace the rear exhaust hanger bracket and replace any forward bracket found cracked and any exhaust tailpipe found damaged, free of charge. The recall began April 23, 2019. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 19501.
Navistar, Inc. (Navistar) is recalling certain 2019 International LT heavy diesel trucks equipped with feature codes 29WAY, 504312, and 504455. The lightweight brake drums with slack adjusters may drag against the brakes causing the drums to overheat which can result in the brake drum cracking, separating from the vehicle or the brakes becoming inoperative. Remedy: Navistar has notified owners, and dealers will replace the brake drums and slack adjusters and replace the brake linings, free of charge. The recall began on May 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18507.
Navistar, Inc. (Navistar) is recalling certain 2018-2019 International WorkStar, DuraStar, LoneStar, LT, ProStar, RH and IC Bus HC, 2018 International TranStar, 2019 International HV and MV trucks and transit buses. The front driver and passenger seat belt anchor D-ring bolt may break in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages." Remedy: Navistar has notified owners, and dealers will replace the D-ring bolt depending on the information found on the seat belt label, free of charge. The recall began May 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18505.
Navistar, Inc. (Navistar) is recalling certain 2019-2021 International LT and RH trucks. The wrist pin may crack and cause connecting rod failure. Remedy: Navistar will notify owners and dealers will install a detection system software to warn the driver prior to engine connecting rod failure and engines with a defective connecting rod will be repaired, free of charge. Vehicles previously repaired under Recall 20V255 that received only a software update will need to return to the dealer for the new remedy. Owner notification letters were mailed on June 11, 2021. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 21505.
Navistar, Inc. (Navistar) is recalling certain 2018-2021 International LoneStar and 2017-2021 International LT vehicles. The battery ground cable ring terminal at the frame connecting point may break, resulting in a loss of electrical power and unintended engine shutdown without warning. Remedy: Navistar will notify owners, and dealers will replace the battery ground cable, free of charge. The recall began on April 16, 2021. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 21501.
Navistar, Inc. (Navistar) is recalling certain 2018-2019 International LT trucks. When the hood is in the closed position, the fender splash panel may rub on the inlet fuel line fitting to the fuel/water separator, causing abrasion damage to the fitting and possibly resulting in a fuel leak. Remedy: Navistar will notify owners, and dealers will trim the splash panel, and replace the fuel/water inlet line if it is damaged, free of charge. The recall began on May 14, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18503.
Navistar, Inc. (Navistar) is recalling certain 2019 International LT and International RH vehicles. The LED backup lights are the incorrect color white. As such, these lights fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: Dealers will inspect and replace the LED backup lights as necessary, free of charge. Owner notification letters were mailed on April 1, 2022. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 22503.
Navistar, Inc. (Navistar) is recalling certain 2018-2023 International LT vehicles equipped with a 1500W Purkeys inverter system. The positive battery cable may be incorrectly routed, causing it to chafe on the side skirt frame and become damaged. Remedy: Dealers will replace any damaged battery cables and install new inverter cable brackets and saddles, free of charge. Owner notification letters were mailed May 16, 2022. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 22507.
Navistar, Inc. (Navistar) is recalling certain 2018-2021 International LoneStar and 2016-2021 International LT vehicles. The cables that connect the batteries to the vehicle frame may become excessively hot, and in some cases, cause battery post separation. Remedy: Dealers will replace the alternator positive and ground cables, and relocate the alternator ground to the starter, free of charge. Owner notification letters are expected to be mailed September 26, 2022. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 22516.
Navistar, Inc. (Navistar) is recalling certain 2018-2021 International HV, 2018-2020 International HX, 2018-2021 International LT and International RH vehicles. The connecting rod wrist pin may crack, resulting in connecting rod failure. Remedy: Dealers will install new knock detection software to warn the driver prior to engine connecting rod failure, and replace connecting rods as necessary, free of charge. Owner notification letters were mailed February 24, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 22518.
Navistar, Inc. (Navistar) is recalling certain 2000-2003 International 8100, 2001-2003 International 9100i, 2001-2007 International 9400i, 2001-2010 International 9200i, 2002-2007, 2009 International 8500, 2003-2007, 2013 International 9900i, 2003-2018 International 8600, 2004, 2007 International 9900iX, 2008-2018 International ProStar, 2010-2011, 2013, 2016 International LoneStar, 2011-2012, 2016 International 4400, 2017-2024 International LT, 2018-2024 International RH, 2019-2021 International LS, 2019-2024 International MV vehicles. The back-up lights offer low visibility when the vehicle is in reverse and bobtail mode. Also, the vehicles have not been equipped with additional unobstructed back-up lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: Dealers will replace the existing rear stop/turn signal lights, free of charge. Owner notification letters were mailed May 06, 2024. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23514.
International Motors, LLC (International) is recalling certain 2016 7600, 2016-2023 Lonestar, 2018 8600, 2018-2023 LT, 2021-2026 MV, 2022-2023 RH, 2023-2026 HX, and 2025-2026 HV vehicles. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working. Remedy: International will work with Bendix to reprogram the ECU, free of charge. Owner notification letters were mailed January 19, 2026. Owners may contact International's customer service at 1-800-448-7825. International's number for this recall is 25525. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 12, 2026.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks, the backup lamps could be blocked and may not be visible. As a result, the trucks don't meet the requirements of the Canadian regulations. Note: This recall only affects trucks equipped with a pintle hook lowering bracket and feature code 01WPN, 01 WPS, or 01VAL. Safety Risk: Backup lamps that aren't visible could cause a person not to recognize that the vehicle is backing and increase the risk of a crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealership to install new tail stop/turn signal lamps with integrated backup lamps.
Issue: On certain trucks, the battery ground cables that connect to the vehicle frame could overheat. If this happens, the battery post could separate and cause a loss of electrical power. As a result, the engine could shut off suddenly. Safety Risk: Overheated battery ground cables could create a burn risk. A loss of power while driving could increase the risk of a crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealership to replace the alternator positive and ground cables. The dealer will also reroute the alternator ground connection from the frame rail to the starter.
Issue: On certain trucks, the reverse lights may not shine true white light. Canadian regulations require reverse lights to be a within a specific colour range. Safety Risk: Reverse lights that aren't the correct colour could reduce visibility and increase the risk of a crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to inspect the date code of the taillights and replace them, as necessary.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain trucks, the connecting rod bushings could fail due to a manufacturing defect. This could cause an engine failure that can result in a sudden loss of power with an inability to restart. Note: This replaces recall 20504 (Transport Canada recall 2020-198). Trucks that previously had new connecting rods installed or that have the latest engine software update do not require this repair. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Additionally, a stalled vehicle could also increase the risk of crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealer install a detection system to warn a driver if there is a problem with the connecting rod bushing. The system will cause a red engine warning light to turn on if a problem is detected, before a connecting rod failure happens. Engines found with a suspect connecting rod will be repaired.
Issue: On certain trucks, the ring terminal that attaches the battery ground cable to the frame may break. If this happens, there could be a loss of electrical power and the engine could shut off suddenly. Safety Risk: A loss of power while driving could increase the risk of a crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your vehicle to a dealer to replace the battery ground cable.
Issue: On certain trucks, the connecting rod bushings could fail due to a manufacturing defect. This could cause an engine failure that can result in a sudden loss of power with an inability to restart. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Additionally, a stalled vehicle could also increase the risk of crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealer install a detection system to warn a driver if there is a problem with the connecting rod bushing. The system will cause a red engine warning light to turn on if a problem is detected, before a connecting rod failure happens. Engines found with a suspect connecting rod will be repaired.
Issue: On certain trucks, the connections inside the brake switch could break. UPDATE – When Navistar notified Transport Canada about this problem, they believed that it may cause the brake lights not to work properly. After further investigation, Navistar has determined that this problem will cause the ABS light to turn on, however the brake lights will continue to function. Accordingly, this safety recall was withdrawn. Safety Risk: This problem does not pose a safety risk. Corrective Actions: This is not a recall. This notice is for information only. If the ABS light on your truck turns on, you should contact a local International truck repair facility to have it repaired.
Issue: On certain vehicles, the exhaust hanger brackets may crack and allow the tail pipe to separate from the vehicle. Safety Risk: If the exhaust tail pipe falls off, it could become a hazard for road users and bystanders. This could create a risk of injury and/or a crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the rear exhaust hanger bracket replaced. Dealers will also inspect and replace any forward bracket found cracked and/or tail pipe that is damaged.
On certain vehicles equipped with an electronic clutch actuator (ECA), the clutch may have been manufactured improperly and could fail. If this occurs, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will recalibrate the Transmission Control Module (TCM).
On certain vehicles, the spring-actuated parking brake may have been improperly assembled. This could result in an internal air leak or a complete separation of the parking brake from the service brake chamber, either of which would cause a loss of braking on the affected wheel assembly. This could cause a sudden, unexpected increase in stopping distance, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and replace affected brake chamber assemblies.
On certain trucks built with a Cummins X15 or ISX15 engine equipped with nylon fuel lines and a banjo bolt on the fuel pump, a blockage in the fuel cooling system may cause a fuel line to burst. This could result in a significant fuel leak onto the roadway, which would create a road hazard for other motorists. Additionally, this condition could also cause an engine stall without warning, without the ability to restart the engine. Both of these conditions may increase the risk of a crash causing injury and/or damage to property. Correction: Cummins-authorized dealers will replace the affected nylon line with a steel line.
On certain commercial trucks, a fuel line could contact the air compressor discharge line. Heat from the compressor discharge line could damage the fuel line, causing a fuel leak which, in the presence of an ignition source, could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will replace the straight fitting on the air compressor outlet with a 45 degree fitting and install a redesigned air compressor discharge line.
On certain vehicles, the seat belt D-ring mounting bolts may break due to a material defect. If this occurs, the seat belt may not properly restrain the seat occupant in a crash, increasing the risk of injury. Correction: Dealers will inspect the driver and passenger D-ring mounting bolts and replace them as necessary.
On certain vehicles, when the hood is closed, the fender splash panel may rub on the inlet fuel line fitting of the fuel/water separator. This could result in abrasion damage to the fuel line fitting causing a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or damage to property. Correction: Dealers will trim the splash panel to allow proper clearance and replace the fuel/water separator inlet fitting if abrasion damage is found.