Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2019 Yamaha YZF-R3, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Yamaha Motor Corporation, USA (Yamaha) is recalling certain 2019-2021 YZF-R3 motorcycles, 2019-2020 XMAX (CDZ300) scooters, and 2020 MT03 motorcycles. The Vehicle Identification Number (VIN) printed on the Federal Certification label may not match the VIN stamped on the vehicle. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification." Remedy: Yamaha will notify owners, and dealers will install a correct certification label, free of charge. The recall began February 19, 2021. Owners may contact Yamaha customer service at 1-800-962-7926. Yamaha's number for this recall is 990144.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain 2015-2020 YZF-R3, 2020 MT03 and 2018-2020 XMAX scooters. Condensation or other contaminates may adhere to the rear reflector lens reducing its effectiveness. Remedy: Yamaha will notify owners, and dealers will replace the rear reflector, free of charge. The recall began October 20, 2020. Owners may contact Yamaha customer service at 1-888-266-3085. Yamaha's number for this recall is 990139.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain motorcycles, the 17-digit vehicle identification number (VIN) on the compliance label does not match the VIN that is stamped into the frame of the motorcycle. Safety Risk: Canadian regulations require each vehicle to have a unique vehicle identification number (VIN) that can be found in multiple places on the motorcycle. Corrective Actions: Yamaha will notify owners by mail and instruct you to take your motorcycle to a dealer to install a corrected compliance label.
Issue: On certain motorcycles, the rear reflectors could have a defect that could reduce the amount of light that is reflected. This could make the motorcycle less visible to others. Safety Risk: A reflector that is difficult to see may make the motorcycle less visible to others. This could increase the risk of a crash. Corrective Actions: Yamaha will notify owners by mail and instruct you to take your motorcycle to a dealer to replace the rear reflector assembly.
Issue: On certain motorcycles, the wiring for the horn may be routed incorrectly. As a result, the brake hose could be damaged by contact with the wiring. This could cause a brake fluid leak and result in reduced brake performance. Safety Risk: Reduced brake performance can cause a loss of control and create the risk of a crash. Corrective Actions: Yamaha will notify owners by mail and instruct you to take your motorcycle to a dealer to re-route the wiring for the horn away from the brake hose. Yamaha advises you not to drive your motorcycle until the recall repairs have been completed.
Issue: On certain motorcycles, the front brake hose holder may be incorrect. As a result, the front brake hose could move out of place and be damaged by contact with the front fork. This could cause a brake fluid leak and result in reduced brake performance. Safety Risk: Reduced brake performance can cause a loss of control and create the risk of a crash. Corrective Actions: Yamaha will notify owners by mail and instruct you to take your motorcycle to a dealer to have the front brake hose holder replaced. Yamaha advises you not to drive your motorcycle until the recall repairs have been completed.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
The rear retro-reflector does not properly reflect the light coming from behind the vehicle. As a result, the vehicle would not be sufficiently visible for the following traffic, increasing the risk of an accident. Production: The affected vehicles were manufactured between 2013 and 2020.. Types: e13*168/2013*00067, e13*168/2013*00164 Types: SH13, SH08, RM11, RM14, RM30, DM07, DM08, SEE6, SH12, SE93, SEC7, RH12, RH07; e13*168/2013*00287, e13*168/2013*00043, e13*168/2013*00003, e13*168/2013*00024, e13*168/2013*00782, e13*168/2013*00648, e13*168/2013*00649, e13*168/2013*00284, e13*168/2013*00241, e13*2002/24*0747,.
The front brake pipe can be damaged by a loose connection to the front wheel fork and by getting into contact with a cable. This can lead to a sudden drop in braking pressure, increasing the braking distance and the risk of an accident. Production: The affected vehicles were manufactured between 2018 and 2019.. Types: Type-approval number: e13*168/2013*00164* , Type: RH12.
The handbrake lever may be defective and could break. Production: The affected vehicles were manufactured in 2019. . Types: Type approval number: e13*168/2013*00164; type: RH12.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain