Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2020 Freightliner Cascadia, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2020 Freightliner Cascadia vehicles equipped with an optional steering wheel air bag. The driver's frontal air bag may deploy unexpectedly. Remedy: Daimler Trucks North America (DTNA) will notify owners, and dealers will remove the air bag as an the interim remedy, free of charge. DTNA is developing a remedy program, which when available, will be communicated to customers and dealers. DTNA issued owners an interim notification on April 5, 2019. The recall began July 19, 2019. Owners may contact Daimler Trucks customer service at 1-800-547-0712. DTNA's number for this recall is FL806. This recall supersedes recall 18V-787.
Daimler Trucks North America LLC (DTNA) is recalling certain 2020 Freightliner Cascadia vehicles. Due to inadequate clearance between the brake chambers and the frame rail, the brake chambers can contact the frame rail and cause brake chamber to detach or be damaged. Remedy: DTNA reports that all affected vehicles have been remedied, therefore owner notifications will not be sent. The recall began on November 7, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-837.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019 Freightliner Classic Cascadia and 2019-2021 Freightliner Cascadia trucks. The drag link taper joint may not have been tightened sufficiently and could come loose, resulting in a complete separation of the drag link from the steering arm. Remedy: DTNA will inspect the drag link taper joint and repair it as necessary, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact DTNA's customer service at 1-800-547-0712. DTNA's number for this recall is FL-900.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Freightliner Cascadia tractor trailers. The single brake modulator valve may be affected by chemical corrosion which can slow down the release timing and cause the brakes to pull to the affected side during automatic braking events. Remedy: DTNA will notify owners, and dealers will replace the front left and right single brake modulator valves will be replaced and spacers added, free of charge. The recall began August 28, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-855.
Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020 Freightliner Cascadia vehicles equipped with an ICU3S Instrument Cluster and a DT12 automated manual transmission. When the transmission is shifted out of the Neutral (N) position, the instrument cluster will continue to display the "N" position. Remedy: Daimler Trucks North America (DTNA) will notify owners, and dealers will reprogram the powertrain controller so that the correct gear selection displays in the instrument cluster, free of charge. The recall began August 7,2019. Owners can contact DTNA's customer service at 1-800-745-8000. DTNA's number for this recall is FL-808.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019-2022 Freightliner Cascadia P4, 2021 Western Star WH126, 2020 Western Star WJ121, and 2021-2022 Western Star 49X vehicles. The battery cable terminal may break, resulting in a loss of electrical power and unintended engine stall. Remedy: Dealers will repair or replace the battery cables, free of charge. Owner notification letters were mailed on January 7, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-893.
Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2020 Freightliner Cascadia vehicles equipped with a certain 40K Light Weight Extra Duty Airliner suspension and 51 inch axle spacing configuration. The brake airlines may be damaged due to inadequate clearance between the ride height control valve and the brake airlines. Remedy: DTNA will notify owners, and dealers will install a new bracket for the height control valve to add additional clearance for the brake airlines, free of charge. The recall began September 16, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-820.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Cascadia P4 vehicles. The brake lights may remain illuminated after the brake pedal has been released. Remedy: DTNA will notify owners, and dealers will replace the 3-pin brake pressure switch with a 2-pin brake pressure switch along with a jumper harness, free of charge. DTNA issued owners an interim notification on November 17, 2020. Owner notification letters were mailed on November 21, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-863.
Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2020 Freightliner 108SD, 114SD, Cascadia, Business Class M2, Western Star 4700 and 5700, Freightliner Custom Chassis S2, Custom Chassis XB, and Custom Chassis XC vehicles equipped with air disc brakes. The brake caliper mounting bolts may have been insufficiently tightened. Remedy: DTNA will notify owners, and dealers will inspect and repair the vehicles, free of charge. The recall began May 1, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-845.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2022 Freightliner Cascadia vehicles equipped with halogen headlight assemblies. The halogen headlight bulb may dislodge during replacement and contact other vehicle components, possibly causing them to melt. Remedy: Dealers will install a foam grommet, cut a 4-inch access hole into the inner fender, and add a warning label on both fenders, free of charge. Owner notification letters were mailed on July 9, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-887.
Daimler Trucks North America LLC (DTNA) is recalling certain 2020-2021 Freightliner Cascadia, 2021 Freightliner 108SD, 114SD and Business Class M2 and Western Star 4700, 4900 and 5700 vehicles. The steer axle spindle nut snap-ring locking feature may be incorrectly installed or missing from the left spindle nut at the spindle. Remedy: DTNA will notify owners, and dealers will inspect the hub cap plug, and reinstall or replace of the snap-ring as needed, free of charge. The recall began December 18, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-866.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2020 Freightliner Cascadia vehicles. The ABS Electronic Control Unit (ECU) may not detect an incorrectly functioning solenoid valve for the ABS/ESC module during certain low voltage start conditions, potentially causing the ABS/ESC Malfunction indicator not to illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems" and number 136, "Electronic Stability Control Systems on Heavy Vehicles." Remedy: DTNA will notify owners, and dealers will reprogram the ABS/ESC module, free of charge. The recall began December 2, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-830.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2022 Freightliner Cascadia sleeper trucks equipped with Bridgestone R284, R268, or R283S ECOPIA steer axle tires in conjunction with a specific air dam. The steer tires may experience tread separation or blow-outs while driving. Remedy: DTNA will notify owners, and dealers will replace the steer tires, free of charge. The recall began March 10, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL872.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020 Freightliner Cascadia, 2020-2022 Western Star 4700 and 5700, 2022 Western Star 4900, and 2020-2023 Freightliner New Cascadia vehicles. The Gross Axle Weight Rating (GAWR) listed on the Federal Certification Label is incorrect, which can allow the vehicle to be overloaded. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification." Remedy: Dealers will be replace the GAWR labels, free of charge. Owner notification letters were mailed July 14, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-933.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during an Adaptive Cruise Control (ACC) braking event. Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 16, 2023. DTNA's number for this recall is FL-958. This recall expands and replaces previous recall 20V-390. All vehicles previously repaired under recall 20V-390 will need to have the new remedy performed.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC). Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 13, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL966.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019-2021 Freightliner 108SD, 114SD, 122SD, Columbia, Coronado, Business Class M2, and 2020 Freightliner Cascadia vehicles. The drag link taper joint may not have been tightened sufficiently and could come loose, resulting in a complete separation of the drag link from the steering arm. Remedy: DTNA will inspect the drag link taper joint and repair it, as necessary, free of charge. Owner notification letters were mailed April 21, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL967. This recall expands recall number 21V-689.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2021 Freightliner Cascadia and Western Star 49X vehicles. The hazard warning lights may flash improperly during an Advanced Braking Assist event. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment." Remedy: Dealers will update the software controlling the hazard warning lights, free of charge. Owner notification letters were mailed May 18, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL851.
Daimler Trucks North America, LLC (DTNA) is recalling certain short wheelbase 2020-2024 Freightliner Cascadia, 2021-2024 Freightliner M2 Business Class, 2022 Western Star 4700, and 2020 Freightliner Classic Cascadia vehicles. The vehicle is equipped with an electronic stability control system and tire combination that may understeer during a J-turn. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 136, "Electronic Stability Control Systems on Heavy Vehicles." Remedy: DTNA will replace the tires, free of charge. Owner notification letters were mailed June 19, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL971.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2023 Freightliner Cascadia and 2022 Western Star 49X vehicles previously repaired incorrectly under recall numbers 23V073 or 22V817. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to one side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC). Remedy: Dealers will replace the brake modulator valves, free of charge. Owner notification letters are expected to be mailed November 8, 2026. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is F1039. Vehicles repaired under the prior recalls will need the new repair completed.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On a small number of trucks, the recall repairs completed by an DTNA service facility during recalls FL958 and FL966 (Transport Canada recall nos. 2022-626 and 2023-051) may not be effective. As a result, another repair is required. On certain trucks, a software problem may not detect corrosion to the brake modulator valves. As a result, the brakes on one wheel could fully apply during automatic braking. If this happens, there could be a brake pull that can cause the truck to change direction. Note: This problem doesn't affect the service brakes. Safety Risk: A brake pull that causes the vehicle to change direction suddenly can increase the risk of crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and advise you to take your truck to a DTNA authorized service facility to inspect, and if necessary, replace the brake modulator valves. The service facility will also update the vehicle software.
Issue: Under certain conditions, the hazard lamps could flash improperly when the active brake assist (ABA) system applies full emergency braking. Note: This recall only affects trucks equipped with the Detroit Assurance 5.0 safety system package. Safety Risk: Hazard lamps that flash improperly could create confusion for others and increase the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and advise you to take your truck to a DTNA authorized service facility to update vehicle software.
Issue: On certain trucks, the joint connecting the steering arm to the drag link may not have been properly tightened. As a result, the joint could loosen and separate, causing a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the castle nut on the drag link taper joint. The nut will be checked for the correct torque, and tightened or repaired, as necessary.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain trucks, the brake modulator valves could corrode. As a result, the brakes on one wheel could fully apply when the roll stability control system activates. If this happens, there could be a brake pull that can cause the truck to change direction. Note: This problem does not affect the service brakes. Safety Risk: A brake pull that causes the vehicle to change direction suddenly can increase the risk of crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect, and if necessary, replace the brake modulator valves.
Issue: On certain trucks, the brake modulator valves could corrode. As a result, the brakes on one wheel could fully apply during an adaptive cruise control braking event. If this happens, there could be a brake pull that can cause the truck to change direction. Note: This problem does not affect the regular service brakes. Safety Risk: A brake pull that causes the vehicle to change direction suddenly can increase the risk of crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect, and if necessary, replace the brake modulator valves.
Issue: On certain trucks, the fuel tubes between the fuel rail and the injectors may crack and create a fuel leak. Note: This recall only affects trucks equipped with a Cummins X12 diesel engines. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Cummins will notify owners by mail and instruct you to take your truck to a Cummins authorized service center to replace the fuel tubes for cylinders 4, 5 and 6 and install vibration isolators.
Issue: On certain trucks, the joint connecting the steering arm to the drag link may not have been properly tightened. As a result, the joint could loosen and separate, causing a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the castle nut on the drag link taper joint. The nut will be checked for the correct torque, and tightened or repaired, as necessary.
Issue: On certain trucks built with aluminum battery cables, the terminal that attaches the battery cable to the frame may break. If this happens, there could be a loss of electrical power and the engine could shut off suddenly. Safety Risk: A loss of power while driving could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the battery cables for corrosion and/or damage. They will be repaired or replaced with copper cables, as necessary.
Issue: On certain trucks, if the headlamp bulb is replaced and not properly installed, it could move and contact other parts inside the headlamp. Safety Risk: A headlight bulb that touches other parts could cause the headlamp to melt or catch fire. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to modify the headlamp assembly and inner fender to assist with headlamp bulb replacement. A warning label/sticker will also be installed.
Issue: On certain trucks, the tread on the steer axle tires could separate while driving. If this happens, the tire could fail and suddenly lose air pressure. Note: This recall only affects trucks equipped with a specific air dam and certain Bridgestone R284, R268, or R283S ECOPIA tires. Safety Risk: A tire failure could cause a loss of control and increase the risk of a crash Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the steer tires, as necessary. DTNA recommends that drivers should pay special attention to tire inflation, loading and make extra inspections of the tire tread and sidewall before and after each trip.
Issue: On certain trucks, the brake lights may stay on after the brake pedal is released. Safety Risk: Brake lights that stay on could cause other road users not to recognize when the truck is braking. This could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the 3-pin brake pressure switch with a 2-pin switch. A jumper harness will also be added. For vehicles equipped with a Cummins engine, the final repair has not yet been finalized. As an interim repair, the 3-pin brake pressure switch will be replaced with a new 3-pin brake pressure switch. A follow up notice will be sent to those owners when the final repair is available.
Issue: On certain trucks, the brake modulator valves could corrode. As a result, the brakes on one side of the vehicle may be slow to release after an automatic braking event. If this happens, there could be a brake pull that can cause the truck to change direction. Note: This problem does not affect the regular service brakes. Safety Risk: A brake pull that causes the vehicle to change direction suddenly can increase the risk of crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the brake modulator valve.
Issue: On certain trucks equipped with "Fleet Engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck. Safety Risk: Reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash. Corrective Actions: Daimler Trucks of North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.
Issue: On certain trucks equipped with air disc brakes, the brake caliper mounting bolts may not be properly tightened. This could cause the caliper bolts to loosen and result in reduced brake effectiveness. Safety Risk: Reduced brake effectiveness could cause an increase in stopping distance and create the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to an authorized Daimler Trucks of North America Service Facility to inspect and replace the brake caliper bolts as necessary.
Issue: On certain vehicles, the driver-front airbag could deploy without warning. Safety Risk: An airbag that deploys without a crash could create a risk of injury. It could also increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a Daimler Trucks North America Authorized Service Facility to install a new airbag wiring harness and clockspring. Note: This supersedes recall 2018-624. Trucks that were fixed require a second repair under this recall.