Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2020 International HV, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Navistar, Inc. (Navistar) is recalling certain 2019-2020 International MV and HV, 2018-2020 Workstar, and 2018-2019 Durastar vehicles equipped with feature codes 12VXT and 12VXU. With the parking brake applied and the automatic transmission in the 'Drive' or 'Reverse' position, when the stationary PTO switch is engaged by the operator, the engine RPM will ramp up and may overcome the parking brake's ability to hold the vehicle. Remedy: Navistar will notify owners, and dealers will update the Engine Control Module to enable the PTO neutral interlock, free of charge. The recall began January 16, 2020. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 19518.
Navistar, Inc. (Navistar) is recalling certain 2018-2019 International WorkStar, International DuraStar, 2019-2021 International HV, International MV, and IC Bus RE Commercial Bus vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. Remedy: Dealers will inspect the rail threads, and replace the rail as necessary, free of charge. Owner notification letters were mailed on June 21, 2021. Owners may contact Navistar customer service at 1-800-448-7825.
Navistar, Inc. (Navistar) is recalling certain 2019-2021 International MV, 2020-2021 International HV, 2014-2020 International DuraStar and 2015-2018 International WorkStar vehicles. When the parking brake is applied and the automatic transmission is still in the drive or reverse position and the stationary PTO switch is engaged by the operator, the engine may rev and overcome the parking brake's ability to keep the vehicle from moving. Remedy: Navistar will notify owners, and dealers will update the parameters in the Cummins ECM for feature codes 12VXT or 12VXU that enables the PTO neutral interlock, free of charge. The recall began February 17, 2021. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 20510.
Navistar, Inc. (Navistar) is recalling certain 2020 International HV Severe Service Diesel Trucks. The steer axle hubs may be insufficiently lubricated or not lubricated at all, which may result in wheel bearing damage. Remedy: Navistar has notified owners, and dealers will inspect the steer axle wheel hubs for the proper fluid level and repair any damaged components, free of charge. The recall began June 14, 2019. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 19509.
Navistar, Inc. (Navistar) is recalling certain 2020 International HV 6X4 vehicles. The vehicles were built with a non-Quick Release Modulator Valve (NQRMV) instead of a Quick Release Modulator Valve (QRMV), which may affect the brake release time. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems." Remedy: Navistar will notify owners, and dealers will replace the NQRMV with a QRMV, free of charge. The recall began January 9, 2020. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 19519.
Navistar, Inc. (Navistar) is recalling certain 2017-2020 International WorkStar and International DuraStar, 2018-2019 IC 1300 FBC Commercial and IC HC Commercial, 2018-2021 IC CE Commercial, International MV and International HV, and 2019-2021 IC TC Commercial buses with Cummins B6.7 diesel engines with a fuel module option number FS90301 or FS90453. The electric fuel heater within the fuel module may overheat and cause plastic in the fuel heater to melt and potentially catch fire. It may also lead to engine stalling. Remedy: Cummins will notify the affected Navistar customers and dealers will disable the fuel heater by either installing a plug in place of the heater or otherwise rendering the fuel heater inoperable and removing the fuse supplying electrical power to the fuel heater and installing a cover over the wire harness connector, free of charge. The recall began May 28, 2020. Owners may contact Cummins customer service at 1-800-286-6467.
Navistar, Inc. (Navistar) is recalling certain 2017-2020 International DuraStar and WorkStar, 2018-2020 IC Bus CECB, International HV and MV, 2018-2019 IC Bus 1300 FBC and HCCB, and 2019-2020 IC Bus TCCB vehicles equipped with Cummins B6.7 diesel engines with fuel module option number FS90301 or FS90453. The electric fuel heater within the fuel module may overheat and cause plastic in the fuel heater to melt and potentially catch fire. It may also lead to engine stalling. Remedy: Cummins will notify the affected Navistar owners. Cummins dealers will replace the fuel heater with a newly designed fuel heater, free of charge. The recall began May 2, 2019. Owners may contact Cummins customer service at 1-800-286-6467 or Navistar customer service at 1-800-448-7825.
Navistar, Inc. (Navistar) is recalling certain 2018-2021 International HV, 2018-2020 International HX, 2018-2021 International LT and International RH vehicles. The connecting rod wrist pin may crack, resulting in connecting rod failure. Remedy: Dealers will install new knock detection software to warn the driver prior to engine connecting rod failure, and replace connecting rods as necessary, free of charge. Owner notification letters were mailed February 24, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 22518.
Navistar, Inc. (Navistar) is recalling certain 2018-2021 International HV, 2019-2021 International RH, 2019-2022 International MV, and 2022 International HX vehicles. A software error in the Body Control Module (BCM) may allow the vehicle to overcome the park brake during power-take-off (PTO) operation. Remedy: Dealers will update the BCM software, free of charge. Owner notification letters are expected to be mailed April 24, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23503.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks equipped with an automatic transmission and the auto neutral feature, when the engine RPM increases for the stationary power take off (PTO), it can overcome the parking brake if the transmission is in drive or reverse gear. As a result, the truck may move suddenly. Safety Risk: Sudden and unexpected movement of the truck could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your truck to a dealer to update the body control module (BCM) software.
Issue: On certain trucks, the connecting rod bushings could fail due to a manufacturing defect. This could cause an engine failure that can result in a sudden loss of power with an inability to restart. Note: This is an expansion of recall 21505 (Transport Canada Recall 2021-240). Safety Risk: A sudden loss of engine power could increase the risk of a crash. Additionally, a stalled vehicle could also increase the risk of crash. Corrective Actions: Navistar will notify owners by mail and instruct you to take your truck to a dealer install a detection system to warn a driver if there is a problem with the connecting rod bushing. The system will cause a red engine warning light to turn on if a problem is detected, before a connecting rod failure happens. Engines found with a suspect connecting rod will be repaired.
Issue: On certain trucks, the fuel rail assembly could develop a leak. Note: This recall only affects trucks equipped with a Cummins L9 or ISX12 diesel engine. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Cummins will notify owners by mail and instruct you to take your truck to a Cummins authorized service center to inspect the fuel rail. If damage is found, the fuel rail and fuel lines will be replaced. If no damage is found, the fuel rail will be reassembled with new crush washers.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain trucks equipped with an automatic transmission, when the engine RPM increases for the stationary power take off (PTO), it can overcome the parking brake if the transmission is in drive or reverse gear. As a result, the truck may move suddenly. Safety Risk: Sudden and unexpected movement of the truck could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your truck to a dealer to update the engine control module software to enable the PTO neutral interlock.
Issue: On certain trucks, the welds that attach the trailer hitch may crack due to improper welding. As a result, the hitch could detach from the truck while towing a trailer. Note: This recall only affects certain trucks with trailer hitches installed by Commercial Truck Equipment. Safety Risk: A trailer that detaches from a truck could create a risk of a crash. Corrective Actions: Commercial Truck Equipment will notify owners by mail and instruct you to take your truck to a dealer to inspect the trailer hitch and repair or replace it, as necessary. You should stop using the trailer hitch until the inspection and repair have been completed.
Issue: On certain vehicles equipped with a Cummins B6.7 diesel engine, the electric fuel heater could overheat and melt. Note: This recall replaces Transport Canada recall 2019-148. Vehicles that were repaired under that recall also require this repair. Safety Risk: A fuel heater that overheats could create the risk of a fire. This could also cause the engine to stall, increasing the risk of a crash. Corrective Actions: Cummins will notify owners by mail and instruct you to take your vehicle to a Cummins authorized service center to disable the fuel heater. The fuel heater will be replaced by installing a plug in its place. Additionally, the fuse supplying electrical power to the fuel heater will be removed and a cover will also be installed over the wire harness connector.
Issue: On certain trucks equipped with an automatic transmission, when the engine RPM increases for the stationary power take off (PTO), it can overcome the parking brake if the transmission is in drive or reverse gear. As a result, the truck may move suddenly. Safety Risk: Sudden and unexpected movement of the truck could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your truck to a dealer to update the engine control module software to enable the PTO neutral interlock.
Issue: On certain trucks, the hubs on the steer axle may not be filled with the proper amount of lubricant or may not contain any lubricant at all. This may result in wheel bearing damage, and in extreme cases, could cause a wheel to separate from the truck. Safety Risk: A wheel separation could increase the risk of a crash. A wheel that separates could also hit another person or vehicle. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to inspect the lubricant level on the steer axle hubs. Any wheel end components and spindles that are found damaged will be replaced.
Note: This recall is replaced by recall 2020-163. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&rn=2020163">Please click here for more information</a>. Issue: On certain vehicles equipped with a Cummins B6.7 diesel engine, the electric fuel heater could overheat and melt. Safety Risk: A fuel heater that overheats could create the risk of a fire. This could also cause the engine to stall, increasing the risk of a crash. Corrective Actions: Cummins will notify owners by mail and instruct them to take their vehicle to a Cummins service location to install a new fuel heater and correct the wiring to the fuel heater. Additionally, the fuel heater fuse will be changed to a 30 amp fuse, and the fuse size information in the owner’s manual will be updated.