Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2020 Isuzu FTR, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2018-2021 FTR and Chevrolet 6500XD vehicles. The ground cable connecting the starter motor to the vehicle frame may break at the starter-side eyelet, resulting in an engine no-crank or slow-crank condition, causing the vehicle not to start. Remedy: Isuzu and Chevrolet will notify their respective owners and dealers to replace the ground cable and to inspect and replace the power steering hose is damage exists, free of charge. The recall began October 9, 2020. Isuzu owners may contact the Isuzu Customer Relations at 1-866-441-9638 and Chevrolet owners may contact the GM Medium Duty Truck assistance line at 1-800-862-4389. Isuzu's number for this recall is V2004.
Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2018-2021 Isuzu FTR and 2018-2021 Chevrolet 6500XD vehicles. A bolt on the left front steering knuckle may come loose, resulting in an increased turning radius and difficulty steering to the left. Remedy: Dealers will replace both right and left side stopper bolt jam nuts and clean or replace the extensions, as necessary, free of charge. Owner notification letters were mailed on February 28, 2022. Owners may contact Isuzu customer service at 1-866-441-9638. This recall is an expansion of recall 19V-467. Vehicles previously repaired will need to have the new remedy performed.
Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2018-2020 FTR and Chevrolet 6500XD vehicles. The jam nut for the steering stopper bolt on the left front knuckle may loosen and allow the bolt to back away from the steering knuckle, increasing the turning radius of the vehicle in a left turn. Remedy: Isuzu will notify owners, and dealers will replace the existing left and right jam nuts with a Grade 8 jam nut, torque the nut to a new torque specification and apply Loctite to the nut and bolt, free of charge. The recall began July 19, 2019. Owners may contact Isuzu customer service at 1-866-441-9638, GM owners may contact GM customer service at 1-800-862-4389. Isuzu's number for this recall is V1902.
Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2018-2020 FTR and Chevrolet 6500XD vehicles. The chassis wire harness outside the relay box may have been improperly routed, potentially allowing the harness to contact the suspension's leaf spring hanger bracket, allowing the harness to get chafed. Remedy: Isuzu will notify owners, and dealers will repair or replace the existing wire harness, as necessary, and install additional clamps to ensure the wire harness is secured away from the hanger bracket, free of charge. The recall began May 15, 2020. Owners may contact Isuzu customer service at 1-866-441-9638. Isuzu's number for this recall is V2003.
Isuzu Motors Limited (Isuzu) is recalling certain 2019-2024 FTR, 2020-2024 Chevrolet LCF 6500XD, 2022-2024 FVR, and 2023-2024 Chevrolet LCF 7500XD vehicles equipped with a Mobileye Collision Warning System. The Mobileye camera cable may have been routed improperly, which can result in wiring damage and an overloaded electrical circuit. Remedy: Dealers will inspect and reroute the Mobileye camera cable or replace the Mobileye camera cable and T-harness, as necessary, free of charge. Owner notification letters were mailed April 08, 2024. Owners may contact Isuzu customer service at 1-866-441-9638. Isuzu's number for this recall is V2401.
Isuzu Motors Limited (Isuzu) is recalling certain 2022-2026 Isuzu FVR, 2023-2026 Chevrolet 7500XD, 2018-2026 Chevrolet 6500XD, and Isuzu FTR vehicles. The axle stabilizer bracket bolts may crack and break, allowing the bracket to detach from the vehicle. Remedy: Dealers will replace the stabilizer bar brackets, free of charge. This is a Phased campaign. Phase 1 will include Class 6 vehicles (FTR, Chevy 6500XD). Owner notification letters were mailed December 12, 2025 to FTR and Chevrolet 6500XD owners. Phase 2 will include Class 7 vehicles (FVR, Chevy 7500XD). Owner notification letters were mailed April 24, 2026 to FVR owners. Owner notification letters were mailed May 11, 2026 to Chevrolet 7500XD owners. Owners may contact Isuzu customer service at 1-866-441-9638. Isuzu's number for this recall is V2506.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks, the front stabilizer bar brackets may not have been manufactured properly. As a result, the bracket(s) could break and the stabilizer bar could detach from the truck. Safety Risk: Parts that detach from the truck could create a hazard for other road users and increase the risk of a crash. Corrective Actions: To reduce the safety risk, Isuzu advises you to inspect the front stabilizer bar before driving until the recall repairs have been completed. Isuzu will notify owners by mail and advise you to take your truck to a dealership to remove or replace the stabilizer bar, stabilizer bar brackets, leaf spring assemblies and/or stabilizer plates, as necessary.
Issue: On certain vehicles, the jam nut for the steering stopper bolt on the left-front knuckle may loosen and allow the bolt to back away from the knuckle. This could result in an increase in the turning radius of the vehicle in left turns. A change in turning radius could make it difficult to make sharp turns. Note: This recall replaces V1902 (Transport Canada recall 2019-306). Vehicles that were repaired under that recall also require this repair. Safety Risk: If a vehicle's turning radius is increased, there could be an increased risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the jam nuts on the steering stopper bolts with new Spiralock nuts. The bolts and extensions will also be cleaned and/or replaced, as necessary.
Issue: On certain trucks, the wire harness from the relay box was not properly routed. As result, the wire harness could be damaged by contact with the leaf spring hanger bracket. If this happens, the engine could stall. This can also cause the anti-lock brake system (ABS) not to work properly. A damaged wire harness could also cause a short circuit. Safety Risk: A sudden loss of engine power could create the risk of a crash. Additionally, a loss of ABS could also increase the risk of a crash. In addition, a short circuit could create the risk of fire. Corrective Actions: Isuzu will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the wire harness for damage. If necessary, it will be replaced. Additional clamps will be installed to move the harness away from the leaf spring hanger bracket.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain vehicles, the jam nut for the steering stopper bolt on the left-front knuckle may loosen and allow the bolt to back away from the knuckle. This could result in an increase in the turning radius of the vehicle in left turns. A change in turning radius could make it difficult to make sharp turns. Safety Risk: If a vehicle's turning radius is increased, there could be an increased risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to replace the jam nuts on the steering stopper bolts. The nuts will be tightened and Loctite will be applied to the nut and bolt. If a bolt is found damaged or missing, the assembly will be replaced.