Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2020 Toyota Supra, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
BMW of North America, LLC (BMW) is recalling certain 2020 M340i, M340i xDrive, 540i, 540i xDrive, X3 M40i, 2020-2021 X4 M40i, 745Le xDrive, 2019-2021 Z4 M40i, and 2020-2021 Toyota Supra vehicles. During engine start, the engine management software may cause loss of braking assist. Full mechanical braking (without assist) remains available. Remedy: Dealers will update the engine management software, free of charge. Owner notification letters were mailed on September 17, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020 Z4 M40i, Z4 sDrive30i, 330i and 330i xDrive vehicles as well as 2020 Toyota Supra vehicles. The headlight control units may fail causing a loss of one or both of the headlights. Remedy: BMW will notify owners, and dealers will replace the headlight control units, free of charge. The recall is expected to begin January 17, 2020. Owners may contact BMW customer service at 1-800-525-7417 or Toyota customer service at 1-888-270-9371.
BMW of North America, LLC (BMW) is recalling certain 2018 540d, 2018-2020 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 530e, 530e xDrive, X3 sDrive, X3 xDrive, X3 M40i, X3 M, and 2019-2020 X4 xDrive, X4 M40i, X4 M, X7 xDrive, X7 M50i, 740Li, 740Li xDrive, 750Li, 750Li xDrive, 8 Series Convertible and Coupe 840i, 840i xDrive, M850i xDrive, X5 sDrive, X5 xDrive, X5 M50i, X6 xDrive, X6 M50i, 330i, 330i xDrive, M340i, M340i xDrive, Z4 sDrive, Z4 M40i, 740Le xDrive and 745Le xDrive, 2018-2019 640i xDrive Gran Turismo and Rolls-Royce Phantom, 2019 M850i xDrive Gran Coupe and Rolls-Royce Cullinan and 2020 Toyota Supra vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors." Remedy: BMW will notify owners, and dealers will update the back-up camera software, free of charge. The recall began November 8, 2019. Owners may contact BMW customer service at 1-800-525-7417 or Rolls-Royce at 1-877-877-3735. Toyota owners may contact Toyota customer service at 1-888-270-9371.
BMW of North America, LLC (BMW) is recalling certain 2020-2021 Z4 and 2020-2021 Toyota Supra vehicles. The weld between the fuel tank halves may have been insufficiently welded, causing the weld to fail. Remedy: BMW will notify owners, and dealers will replace the fuel tank, free of charge. The recall began December 18, 2020. Owners may contact BMW customer service at 1-800-525-7417 or Toyota customer service at 1-888-270-9371.
BMW of North America, LLC (BMW) is recalling certain 2020 Toyota Supra vehicles. The driver's seat belt guide loop mount may have been improperly welded. Remedy: Owners have been notified, and Toyota dealers will inspect the seat belt guide loop mount. If the mount is defective, the vehicle will be replaced, free of charge. The recall began October 16, 2019. Owners may contact the Toyota Customer Experience Center at 1-888-270-9371. Toyota's number for this recall is K0R.
BMW of North America, LLC (BMW) is recalling certain 2019 Z4 sDrive30i, 2019-2020 330i xDrive, M340i and M340i xDrive, 2020 X3M and X4M, and Toyota Supra vehicles. In certain driving conditions, such as high temperatures and rough road surfaces, a steering gear tie rod may become damaged, possibly resulting in a fractured tie rod. Remedy: BMW and Toyota will notify owners, and dealers will replace the steering gear tie rods, free of charge. The recall began August 14, 2020. Owners may contact BMW customer service at 1-800-525-7417 or Toyota customer service at 1-888-270-9371.
BMW of North America, LLC (BMW) is recalling certain 2019-2020 Z4 sDrive30i, Z4 M40i and 2020 Toyota Supra vehicles. The headlamps are able to be adjusted horizontally. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices and Associated Equipment." Remedy: BMW will notify owners, and dealers will inspect the headlamp vertical and horizontal adjustment plugs, correcting them as necessary, free of charge. The recall began December 23, 2020. BMW owners may contact BMW customer service at 1-800-525-7417 or Toyota owners may contact Toyota customer service at 1-888-270-9371.
BMW of North America, LLC (BMW) is recalling certain 2019-2021 BMW 330i, 2019-2022 BMW Z4, 2020-2022 BMW 530i, X3, X4, Toyota Supra, 2021-2022 BMW 430i, 430i Convertible, and 2022 BMW 230i vehicles. The engine starter relay may corrode, causing the relay to overheat and short circuit. Remedy: Owners are advised to park their vehicles outside and away from structures until the remedy is complete. Dealers will replace the engine starter, free of charge. Owner notification letters were mailed February 6, 2026. Owners may contact BMW customer service at 1-800-525-7417. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov November 14, 2025.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: Under certain conditions, the windshield wiping system may not meet certain requirements of Canadian regulations. Safety Risk: This small error does not affect safety. Corrective Actions: This is not a recall. Toyota has made changes to ensure that all new vehicles meet Canadian regulations.
Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French. Safety Risk: This error does not affect vehicle safety. Corrective Actions: This is not a recall. Toyota has corrected the tire and loading information label for all new vehicles.
Issue: On certain vehicles, a software problem could cause the vacuum pump to be damaged during engine starting. If this happens, there could be a loss of brake assist. This can cause an increase in brake pedal effort and increase the distance needed to stop the vehicle. Safety Risk: A sudden increase in brake pedal force could lead to an increased stopping distance. This could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to update the engine management software.
Issue: On certain vehicles, the fuel tank may not have been welded properly. As a result, the fuel tank could leak. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel tank.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. Production: 04.09.2020 - 31.08.2022. Types: e1*2007/46*1982*03 - e1*2007/46*1982*06.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. Production: 07.02.2019 - 03.09.2020. Types: JTSC; e1*2007/46*1982*.
The engine management software could cause the oil/vacuum pump, which supplies vacuum for brake assistance (brake boost), to become damaged. This may occur when 1) pressing the engine start/stop button two times in rapid succession, or 2) depressing the brake pedal very briefly while pressing the engine start/stop button. This could result in a loss of brake assistance and increased stopping distance, increasing the risk of an accident. Production: The affected vehicles were manufactured between 31 July 2018 and 15 June 2021.. Types: e1*2007/46*1982*00.
Due to an incorrect configuration, under high stresses a vibration fatigue failure may occur in the kink groove area of the steering tie rod. This could affect vehicle handling and increase the risk of an accident. Production: The affected vehicles were manufactured between 13 March and 5 April 2019.. Types: Type-approval number: e1*2007/46*1982; Type: JTSC.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain vehicles, the headlight adjustment plugs were not properly installed when the vehicle was assembled. As a result, the headlights may be adjusted horizontally. Canadian regulations do not allow for horizontal headlight adjustment unless the vehicle is equipped with a built-in aiming device. Safety Risk: Headlights that are not properly adjusted could cause reduced visibility or glare for oncoming drivers, and could increase the risk of a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the headlights. If an incorrect adjustment plug is found, it will be replaced with the correct plug.
Issue: On certain vehicles, the rearview camera does not return to the default settings when it turns on. This could make the rearview image difficult to see if a driver had previously adjusted the camera display brightness at or near the lowest setting, and contrast at or near the highest setting. Canadian regulations require that the rearview display returns to the default view each time the camera is turned on. Safety Risk: Reduced rear visibility could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the software for the rearview camera. Drivers are recommended not to adjust the display brightness at or near the lowest setting, and contrast at or near the highest setting, until this recall is completed. Update 2021/09/22: The software update for this recall has been combined with the repair for recall 2021-527.