Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2023 Freightliner Business Class M2, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Daimler Trucks North America, LLC (DTNA) is recalling certain 2023 Freightliner M2, 108SD, and 114SD vehicles. The u-joint pinch bolt on the steering shaft may become detached, which can cause a loss of steering control. Remedy: Dealers will inspect and repair the joint, as necessary, free of charge. Owner notification letters are expected to be mailed august 1, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-937.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2023 Freightliner 108SD, 114SD, Business Class M2, Cascadia, 2023 Freightliner FCCC MC, MT45, S2C 106CAB, XCM, S2RV 106CAB, XCR, XCS, and 2023 Western Star 4700, 49X, and 47X vehicles. The engine control module (ECM) may experience an internal short-circuit, which can result in an unexpected engine shut down. Remedy: Cummins will replace the ECM, free of charge. Owner notification letters are expected to be mailed September 26, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-949.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2023 Freightliner 114SD, 2023 Freightliner 122SD, 2020 Western Star 4700, 2019-2022 Western Star 4900, 2019-2023 Freightliner Business Class M2, and 2021 Freightliner Cascadia vehicles. The vehicles are equipped with tires that are not compatible with their 8.25-inch rims. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 120, "Wheels and Rims-Other Than Passenger Cars." Remedy: Dealers will replace the tires, free of charge. Owner notification letters were mailed June 2, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-962.
Daimler Trucks North America, LLC (DTNA) is recalling certain short wheelbase 2020-2024 Freightliner Cascadia, 2021-2024 Freightliner M2 Business Class, 2022 Western Star 4700, and 2020 Freightliner Classic Cascadia vehicles. The vehicle is equipped with an electronic stability control system and tire combination that may understeer during a J-turn. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 136, "Electronic Stability Control Systems on Heavy Vehicles." Remedy: DTNA will replace the tires, free of charge. Owner notification letters were mailed June 19, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL971.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2024-2025 Freightliner 108SD, 2022-2025 Freightliner 114SD, Freightliner Business Class M2, 2025 Freightliner eM2, 2020-2025 Western Star 49X, 2021-2025 Western Star 47X, and 2022-2025 Western Star 57X vehicles that may be upfitted with a body lighting interface controller and replacement brake lights. The brake lights may not illuminate when the brakes are automatically applied during an active brake assist (ABA) event. Remedy: Dealers will update the ABA software, free of charge. Owner notification letters were mailed October 24, 2024. Owners may contact DTNA customer service at 800-745-8000. DTNA's number for this recall is F1009.
Fontaine Modification Company (Fontaine Modification) is recalling certain 2022-2024 Freightliner Business Class M2 vehicles. Welds may crack and fail, allowing the Intermediate steering shaft assembly to detach from the steering column. Remedy: Fontaine Modification will replace the intermediate steering shaft, free of charge. Owner notification letters are expected to be mailed September 3, 2025. Owners may contact Fontaine Modification customer service at 1-800-366-8246.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2026 Western Star 49X, Freightliner Business Class M2, Freightliner 114SD, Freightliner 108SD, 2021-2026 Western Star 47X, 2021-2023 Freightliner 122SD, 2022 Western Star 48X, and 2023 Western Star 4700 vehicles. The axle clamp fasteners may be loose, which can result in a loss of vehicle control. Remedy: Dealers will inspect and tighten the fasteners, as necessary, free of charge. Owner notification letters were mailed December 29, 2025. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is F1027.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2022-2025 Freightliner Business Class M2, 2022-2027 FCCC XCM, FCCC XCR, 2023 Freightliner 108SD, 2024-2027 FCCC XCS and FCCC XBS vehicles equipped with certain Cummins L9 diesel engines. The remote fuel filter hoses may separate from the fitting, causing a fuel leak and an engine stall. Remedy: Cummins will replace the fuel hoses, free of charge. Owner notification letters are expected to be mailed November 20, 2026. Owners may contact DTNA customer service at 1-800-547-0712 or Cummins customer service at 1-800-286-6467. DTNA's number for this recall is F1042.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks, the fasteners for the axle clamp(s) may not have been tightened properly. As a result, the clamps could loosen. If this happens, the axle could move and cause a loss of steering control. Note: This recall only affects certain trucks equipped with a TufTrac Gen 2 suspension. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify the owners by mail and advise you to take your truck to a DTNA authorized service facility to inspect and tighten the axle clamp fasteners. The axle clamp castings will be replaced, as necessary.
Issue: On certain trucks, a software problem could cause the brake lights not to work when the brakes are automatically applied during emergency braking. Safety Risk: Brake lights that don't work could cause others not to recognize when a vehicle is braking. This could increase the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and advise you to take your truck to a DTNA authorized service facility to update the active brake assist (ABA) software.
Problem: On certain trucks, the inner flange of the steer axle wheels may crack. As a result, a piece of the flange could separate from the wheel. Note: This special warranty program only affects ULA18xxx wheels with a size of 22.5" x 8.25". UPDATE - When Daimler Truck North America (DTNA) notified Transport Canada about this problem, they believed that it may cause a rapid air loss of a tire. After further investigation, DTNA has determined that this problem would not result in a rapid air loss. Accordingly, this safety recall was withdrawn. Safety Risk: This problem does not pose a safety risk. Corrective Actions: This is not a recall and will be addressed under a special warranty program offered by Alcoa, the wheel supplier. This notice is for information only and is not being conducted under the requirements of the Motor Vehicle Safety Act. If you notice any cracks on the inner flange of the steer axle wheels, you should contact Alcoa at 1-800-242-9898.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain buses, the driveshaft could break while driving and cause a sudden loss of power to the wheels. The driveshaft could also separate from the vehicle. Safety Risk: A loss of power to the wheels could increase the risk of a crash. Additionally, a driveshaft that separates from a vehicle could create a hazard for other road users and increase the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and advise you to take your bus to a DTNA authorized service facility to replace the driveshaft.
Issue: A small number of short-wheelbase trucks were equipped with wheels and tires that may not be suitable for the vehicle. As a result, the truck may not meet certain test requirements for electronic stability control (ESC) systems for heavy trucks. Safety Risk: A vehicle that under- or oversteers in certain driving situations could have an increased risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail. The corrective actions for this recall are under development.
Issue: On certain trucks, the cotter pin may be missing from the tie rod castle nut on the front steer axle. As a result, the nut could loosen. If this happens, the tie rod could detach from the steering arm and cause a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail. The corrective actions for this recall are under development.
Issue: On certain trucks, the tail lamps do not turn on when the daytime running lamps (DRLs) are on. Canadian regulations require that, if a vehicle has dash backlighting, the low beam headlamps and tail lamps must automatically switch on when it is dark or the tail lamps must stay on at all times. Safety Risk: Driving without tail lamps in low light conditions could make the truck less visible and increase the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to update the parameters for the lighting system. For Western Star 4700 ZODIAC models, the service facility will replace or modify the wiring harness.
Issue: Certain trucks were built with tires that are not approved for use with the truck's wheels. As a result, the tires may not perform properly, or a tire could fail. Safety Risk: A tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the affected tires.
Issue: On certain trucks, a problem in the engine control module (ECM) could cause a short circuit. If this happens, the engine could stall and you may not be able to restart it. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: Cummins will notify owners by mail and instruct you to take your truck to a Cummins authorized service center to replace the engine control module.
Issue: On certain trucks, a bolt for the upper joint on the steering shaft may not have been installed correctly. As a result, the joint could disconnect and cause a loss of steering. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the upper joint on the steering shaft, and if necessary, re-install the pinch bolt.