Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2025 Peterbilt 548, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
PACCAR Incorporated (PACCAR) is recalling certain 2024-2025 Kenworth T280, T380, T480, T680, T880, L770, W990, and 2024-2025 Peterbilt 389, 520, 535, 536, 537, 548, 567, 579, 589 trucks. The steering gear assemblies may have been assembled incorrectly with fewer recirculating balls than are required, which may result in a loss of steering control. Remedy: Dealers will inspect and replace the steering gears as necessary, free of charge. Owner notification letters were mailed March 20, 2024. Owners may contact Peterbilt customer service at 1-940-591-4220 and/or Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 24PBC and 24KWC.
PACCAR Incorporated (PACCAR) is recalling certain 2025 Peterbilt 536, 548, 567, 579, and Kenworth T280, T380, T480, T680, T880, and W990 vehicles. The steering gear sector shaft may have been improperly heat-treated, which can cause the gear teeth to crack or fracture. Remedy: Dealers will inspect the serial numbers, and replace the steering gears as necessary, free of charge. Owner notification letters were mailed August 7, 2024. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24PBF and 24KWF.
PACCAR Incorporated (PACCAR) is recalling certain 2025 Kenworth K270, K370, L770, T280, T380, T480, T680, T880, W900, W990, 2025 Peterbilt 220, 520, 536, 537, 548, 567, 579, and 589 trucks. The tie rod or drag link assembly may contain an improperly heat-treated ball stud, causing the ball stud to break. Remedy: Owners are advised not to drive their vehicles until the remedy has been completed. Dealers will inspect and replace the tie rod and drag link assemblies as necessary, free of charge. Owner notification letters were mailed August 6, 2024. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWG and 24PBG.
PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 537, 2024-2025 Kenworth T380, T480, Peterbilt 548, and 2025 Peterbilt 536 trucks, equipped with certain Meritor 10-16K and 18-23K front steer drive axles. The front steer drive axles may have insufficient wheel bearing lubricant. Remedy: Dealers will inspect and repair the wheel end with new parts and lubricate the bearings as necessary, free of charge. Owner letters were mailed July 21, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 or Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWJ and 24PBJ.
PACCAR Incorporated (PACCAR) is recalling certain 2021-2025 Peterbilt and Kenworth vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Please see the recall report for a complete list of models. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop functioning. Remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed February 3, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWL and 24PBL.
PACCAR Incorporated (PACCAR) is recalling certain 2025 Kenworth T180, Peterbilt 535, 567, 2025-2026 Kenworth T280, 2023-2026 Kenworth T380, 2024-2026 Kenworth T480, 2024-2026 Peterbilt 536, 537, and 548 trucks. The exterior lighting switch may fail, resulting in the hazard lights and the instrument display back-light brightness adjustment not functioning. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 101, "Control and Displays" and 108, "Lamps, Reflective Devices and Associated Equipment." Remedy: Dealers will update the vehicle cab controller unit (VECU) software, free of charge. Owners are advised that a non-responsive switch can be temporarily reset by a key cycle. Owner notification letters were mailed March 26, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 25KWB and 25PBB.
PACCAR Incorporated (PACCAR) is recalling certain 2024-2026 Kenworth T480, T680, T880, W990, Peterbilt 520, 536, 537, 548, 567, 579, 589, 2025 Kenworth T180, Peterbilt 535, 2025-2026 Kenworth T280, T380 and L770 vehicles. The tail brake light, upper and lower beam headlights, reverse light, and turn signal may not illuminate as intended. In addition, the lift axles, if lowered, may revert to a raised position, or oscillate up and down when the signal warning lights are activated. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices and Associated Equipment." Remedy: Dealers will update the VCU software, free of charge. Owner letters were mailed August 19, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's number for this recall is 25PACF.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
Issue: On certain trucks, a software problem could cause the stop lamps, low beam headlamps, high beam headlamps, reverse lamps and turn signal lamps not to turn on, or to turn on unexpectedly. This problem could also cause the lift axle(s) to raise or lower on their own. Safety Risk: Lamps that don't work properly could reduce visibility and increase the risk of a crash. Lift axles that move unexpectedly could increase the risk of injury. Corrective Actions: PACCAR will notify owners by mail and advise you to take your truck to a dealership to update the vehicle software.
Issue: On certain trucks, the exterior light switch could fail. If this happens, the hazard lights and the backlight for the instrument cluster display may not work. As a result, warnings, tell-tales and gauges may not display properly. Safety Risk: Warnings, tell-tales and gauges that don't display properly could increase the risk of a crash. Additionally, hazard lamps that don't work could make the vehicle less visible and increase the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and advise you to take your truck to a dealership to update the vehicle electronic control unit software.
Issue: On certain trucks, poor signal strength could cause the electronic control unit (ECU) to stop working or not to work properly. As a result, some safety systems may not work, including the antilock braking system, automatic traction control, electronic stability control, active cruise control and the collision mitigation system. Safety Risks: Vehicle safety systems that don't work correctly could increase the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and advise you to take your truck to a dealership to reprogram the ECU software.
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Issue: On certain trucks, the ball stud on the drag link and/or tie rod may not have been manufactured properly. As a result, the stud could fail and cause a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: PACCAR advises not to drive the truck until the recall repairs are completed. PACCAR will notify owners by mail and advise you to contact a dealership to arrange for an inspection. The dealer will replace the drag link and/or tie rod, as necessary.
Issue: On certain trucks, the steering gear may not have been manufactured properly. As a result, the steering gear could break and there could be a sudden increase in steering effort. Safety Risk: A sudden increase in steering effort could increase the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and advise you to take your truck to a dealership to inspect the serial number on the steering gear and, if necessary, replace it.
Issue: On certain trucks, the steering gear may not have been assembled correctly. As a result, the steering gear could break and cause a loss of steering. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and instruct you to take your truck to a dealership to inspect the serial number on the steering gear and, if necessary, replace it.