Loading NHTSA data…
Loading NHTSA data…
Recalls, inspection results and owner complaints for the 2012 Nissan Juke, from official sources in the US, Canada and Europe. To check one specific car, enter its VIN or plate.
We checked recall campaigns for this vehicle, or for its model where the register works by model.
Source: NHTSA (US Department of Transportation) · US public domain
Nissan North America, Inc. (Nissan) is recalling certain 2011-2012 Nissan Juke vehicles previously remedied under recall 12V-069. During that recall remedy, the fuel pressure sensor may not have been properly tightened, potentially causing the sensor to loosen and leak fuel. Remedy: Nissan will notify owners, and dealers will tighten the fuel pressure sensor to the proper torque, free of charge. The recall began on April 24, 2018. Owners may contact Nissan customer service at 1-800-867-7669.
NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 JUKE VEHICLES MANUFACTURED FROM FEBRUARY 3, 2012, THROUGH MAY 26, 2012. DUE TO AN INCOMPLETE WELD PENETRATION, THE REAR SEAT BACK STRIKER MAY PARTIALLY SEPARATE IN A CRASH. Remedy: NISSAN WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE AFFECTED SEAT BACK STRIKERS, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 20, 2012. OWNERS MAY CONTACT NISSAN CUSTOMER SERVICE AT 1-800-647-7261.
Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2014 Nissan Juke, 2012-2013 Infiniti M56, QX56, and 2014-2015 Infiniti Q70 (V8 engine vehicles only), and QX80 vehicles. The fuel pressure sensors may not have been sufficiently tightened during production. As a result, the fuel pressure sensor may loosen with vehicle usage and cause a fuel leak. Remedy: Nissan will notify owners, and dealers will re-torque the fuel pressure sensors free of charge. The recall began on January 25, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 JUKE, INFINITI QX AND INFINITI M VEHICLES. THE FUEL PRESSURE SENSORS MAY NOT HAVE BEEN TIGHTENED TO THE CORRECT SPECIFICATION. AS A RESULT, THE FUEL PRESSURE SENSOR MAY LOOSEN DUE TO HEAT AND VIBRATION CAUSING FUEL TO LEAK. Remedy: NISSAN WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE FUEL PRESSURE SENSORS, AS NECESSARY, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 2, 2012. OWNERS MAY CONTACT NISSAN CUSTOMER SERVICE AT 1-800-647-7261.
We checked Transport Canada's recall database for this make, model and year.
Source: Transport Canada Vehicle Recalls Database · Open Government Licence – Canada
On certain vehicles, the fuel pressure sensor may not have been tightened properly when the corrective measure of recall 2012-074 was performed. As a result, the fuel pressure sensor may loosen over time, which could cause a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or damage to property. Correction: Dealers will inspect and retighten the fuel pressure sensor as necessary.
On certain vehicles, the fuel pressure sensor connected to the engine fuel delivery rail may not have been sufficiently tightened during vehicle assembly. Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and the rail. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect the pressure sensor and tighten to specification. Note: This is an expansion of recall 2012-074. Vehicles that were repaired under the previous campaign are not affected because that remedy would have corrected the subject condition.
On certain vehicles, the rear seat latch strikers (which secure the seat backrest in the upright position) may have been manufactured incorrectly. As a result, the rear seat back strikers may deform during a frontal vehicle crash, which could increase the risk of injury to a rear seat occupant. Correction: Dealers will replace the rear seat latch strikers with updated versions.
On certain vehicles, the fuel pressure sensor connected to the engine fuel delivery rail may not have been sufficiently tightened during vehicle assembly. Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and rail. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect for fuel leakage from the pressure sensor and the fuel rail. If there are no signs of a fuel leak, the fuel pressure sensor will be tightened to specifications. If a fuel leak is confirmed, the gasket between the sensor and the fuel delivery rail will be replaced, and the sensor will be tightened.
We checked the EU Safety Gate for recall alerts naming this model and its production years.
Source: EU Safety Gate (European Commission) · CC BY 4.0, © European Union
Production: Juke: produced from 25/01/2012 to 06/05/2014; Patrol: produced from 09/01/2012 to 25/06/2014 . Types: Juke (F15), Type Approval No. e11*2007/46*0132; Patrol (Y62), Type Approval No. e13*10R00*19R03*10219.
Production: The recall concerns vehicles produced from 07/06/2012 to 04/07/2012. Types: Juke, F15. Type Approval No. e11*2007/46*0132..
How cars of this model and year did at Norway's periodic inspection, across a full year of tests.
Source: Statens vegvesen, periodic inspections (EU-kontroll) · CC BY 4.0
Problems owners of this model reported to NHTSA, grouped by component.
Source: NHTSA (US Department of Transportation) · US public domain
Crash-test ratings from NHTSA's New Car Assessment Program.
Source: NHTSA (US Department of Transportation) · US public domain